skip to main content


Title: Low‐Cost Manufacturing of Bioresorbable Conductors by Evaporation–Condensation‐Mediated Laser Printing and Sintering of Zn Nanoparticles

Currently, bioresorbable electronic devices are predominantly fabricated by complex and expensive vacuum‐based integrated circuit (IC) processes. Here, a low‐cost manufacturing approach for bioresorbable conductors on bioresorbable polymer substrates by evaporation–condensation‐mediated laser printing and sintering of Zn nanoparticle is reported. Laser sintering of Zn nanoparticles has been technically difficult due to the surface oxide on nanoparticles. To circumvent the surface oxide, a novel approach is discovered to print and sinter Zn nanoparticle facilitated by evaporation–condensation in confined domains. The printing process can be performed on low‐temperature substrates in ambient environment allowing easy integration on a roll‐to‐roll platform for economical manufacturing of bioresorbable electronics. The fabricated Zn conductors show excellent electrical conductivity (≈1.124 × 106S m−1), mechanical durability, and water dissolvability. Successful demonstration of strain gauges confirms the potential application in various environmentally friendly sensors and circuits.

 
more » « less
PAR ID:
10035746
Author(s) / Creator(s):
 ;  ;  ;  ;  ;  ;  
Publisher / Repository:
Wiley Blackwell (John Wiley & Sons)
Date Published:
Journal Name:
Advanced Materials
Volume:
29
Issue:
26
ISSN:
0935-9648
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Abstract

    The growing demand for flexible and wearable hybrid electronics has triggered the need for advanced manufacturing techniques with versatile printing capabilities. Complex ink formulations, use of surfactants/contaminants, limited source materials, and the need for high‐temperature heat treatments for sintering are major issues facing the current inkjet and aerosol printing methods. Here, the nanomanufacturing of flexible hybrid electronics (FHE) by dry printing silver and indium tin oxide on flexible substrates using a novel laser‐based additive nanomanufacturing process is reported. The electrical resistance of the printed lines is tailored during the print process by tuning the geometry and structure of the printed samples. Different FHE designs are fabricated and tested to check the performance of the devices. Mechanical reliability tests including cycling, bending, and stretching confirm the expected performance of the printed samples under different strain levels. This transformative liquid‐free process allows the on‐demand formation and in situ laser crystallization of nanoparticles for printing pure materials for future flexible and wearable electronics and sensors.

     
    more » « less
  2. Microscale continuous thin films or patterned conductive structures find applications in thin film electronics, energy generation and functional sensor systems. An emerging alternative to conventional vacuum based deposition of such structures is the additive deposition and sintering of conductive nanoparticles, to enable low temperature, low-cost and low energy fabrication. While significant work has gone into additive deposition of nanoparticles the realization of the above potential needs nanoparticle sintering methods that are equally low-cost, in-situ, ambient condition and desktop-sized in nature. This work demonstrates the integration of non-laser based, low-cost and small footprint optical energy sources for ambient condition sintering of conductive nanoparticles, with wide-area aerosol jet based additive printing of nanoparticle inks. The nanoparticle sintering is characterized by quantifying the sintering temperatures, sintered material conductivity, crystallinity, optical properties, thickness and microscale morphology in terms of the sintering parameters. It is shown that such optical sintering sources can be further integrated with inkjet printing as well, and the implications on new paradigms for hybrid additive- 
    more » « less
  3. The fast and efficient synthesis of nanoparticles on flexible and lightweight substrates is increasingly critical for various medical and wearable applications. However, conventional high temperature (high-T) processes for nanoparticle synthesis are intrinsically incompatible with temperature-sensitive substrates, including textiles and paper ( i.e. low-T substrates). In this work, we report a non-contact, ‘fly-through’ method to synthesize nanoparticles on low-T substrates by rapid radiative heating under short timescales. As a demonstration, textile substrates loaded with platinum (Pt) salt precursor are rapidly heated and quenched as they move across a 2000 K heating source at a continuous production speed of 0.5 cm s −1 . The rapid radiative heating method induces the thermal decomposition of various precursor salts and nanoparticle formation, while the short duration ensures negligible change to the respective low-T substrate along with greatly improved production efficiency. The reported method can be generally applied to the synthesis of metal nanoparticles ( e.g. gold and ruthenium) on various low-T substrates ( e.g. paper). The non-contact and continuous ‘fly-through’ synthesis offers a robust and efficient way to synthesize supported nanoparticles on flexible and lightweight substrates. It is also promising for ultrafast and roll-to-roll manufacturing to enable viable applications. 
    more » « less
  4. Abstract

    In this work, a scalable and rapid process is developed for creating a low‐cost humidity sensor for wireless monitoring of moisture levels within packaged goods. The sensor comprises a moisture‐sensitive interdigitated capacitor connected to a planar spiral coil, forming an LC circuit whose resonant frequency is a function of environmental humidity. The sensor is fabricated on a commercially available metallized parchment paper through selective laser ablation of the laminated aluminum (Al) film on the parchment paper substrate. The laser ablation process provides a unique one‐step patterning of the conductive Al layer on the paper while simultaneously creating high surface area Al2O3nanoparticles within the laser‐ablated regions. The intrinsic humidity‐responsive characteristics of the laser‐induced Al2O3nanostructures provide the wireless sensor with a tenfold higher sensitivity to humidity than a similar LC resonant sensor prepared by conventional photolithography‐based processes on FR‐4 substrates. The frequency change of the sensor is observed to be a linear function within the range of 0−85% RH, providing an average sensitivity of −87 kHz RH−1with good repeatability and stable performance. Furthermore, the employment of scalable laser fabrication processes using commercially available inexpensive materials renders these technologies viable for roll‐to‐roll manufacturing of low‐cost wireless sensors for smart packaging applications.

     
    more » « less
  5. Abstract

    Direct printing of functional materials, structures, and devices on various platforms such as flexible to rigid substrates is of interest for applications ranging from electronics to energy and sensing to biomedical devices. Current additive manufacturing (AM) and printing processes are either limited by the available sources of functional materials or require to be in the form of precisely designed inks. Here, a novel laser‐based additive nanomanufacturing (ANM) system capable of in situ and on‐demand generations of nanoparticles that can serve as nanoscale building blocks for real‐time sintering and dry printing a variety of multifunctional materials and patterns at atmospheric pressure and room temperature is reported. The ability to print different functional materials on various rigid and flexible platforms is shown. This nonequilibrium process involves pulsed laser ablation of targets and in situ formation of pure amorphous nanoparticles’ stream that are guided through a nozzle onto the surface of the substrate, where they are sintered/crystallized in real‐time. Further, the process–structure relationship of the printed materials from nanoscale to microscale is shown. This new ANM concept opens up an opportunity for printing advanced functional materials and devices on rigid and flexible substrates that can be employed both on the earth and in space.

     
    more » « less