Nanocrystalline silicon can have unique thermal transport and mechanical properties governed by its constituent grain microstructure. Here, we use phonon ray-tracing and molecular dynamics simulations to demonstrate the largely tunable thermomechanical behaviors with varying grain sizes (a0) and aspect ratios (ξ). Our work shows that, by selectively increasing the grain size along the heat transfer direction while keeping the grain area constant, the in-plane lattice thermal conductivity (kx) increases more significantly than the cross-plane lattice thermal conductivity (ky) due to anisotropic phonon–grain boundary scattering. While kx generally increases with increasing ξ, a critical value exists for ξ at which kx reaches its maximum. Beyond this transition point, further increases in ξ result in a decrease in kx due to substantial scattering of low-frequency phonons with anisotropic grain boundaries. Moreover, we observe reductions in the elastic and shear modulus with decreasing grain size, and this lattice softening leads to significant reductions in phonon group velocity and thermal conductivity. By considering both thermal and mechanical size effects, we identify two distinct regimes of thermal transport, in which anisotropic phonon–grain boundary scattering becomes more appreciable at low temperatures and lattice softening becomes more pronounced at high temperatures. Through phonon spectral analysis, we attribute the significant thermal conductivity anisotropy in nanograined silicon to grain boundary scattering of low-frequency phonons and the softening-driven thermal conductivity reduction to Umklapp scattering of high-frequency phonons. These findings offer insights into the manipulation of thermomechanical properties of nanocrystalline silicon via microstructure engineering, carrying profound implications for the development of future nanomaterials.
- NSF-PAR ID:
- 10037680
- Publisher / Repository:
- DOI PREFIX: 10.1029
- Date Published:
- Journal Name:
- Geochemistry, Geophysics, Geosystems
- Volume:
- 18
- Issue:
- 8
- ISSN:
- 1525-2027
- Page Range / eLocation ID:
- 3034 to 3061
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
-
The electrical properties of polycrystalline graphene grown by chemical vapor deposition (CVD) are determined by grain-related parameters—average grain size, single-crystalline grain sheet resistance, and grain boundary (GB) resistivity. However, extracting these parameters still remains challenging because of the difficulty in observing graphene GBs and decoupling the grain sheet resistance and GB resistivity. In this work, we developed an electrical characterization method that can extract the average grain size, single-crystalline grain sheet resistance, and GB resistivity simultaneously. We observed that the material property, graphene sheet resistance, could depend on the device dimension and developed an analytical resistance model based on the cumulative distribution function of the gamma distribution, explaining the effect of the GB density and distribution in the graphene channel. We applied this model to CVD-grown monolayer graphene by characterizing transmission-line model patterns and simultaneously extracted the average grain size (~5.95 μm), single-crystalline grain sheet resistance (~321 Ω/sq), and GB resistivity (~18.16 kΩ-μm) of the CVD-graphene layer. The extracted values agreed well with those obtained from scanning electron microscopy images of ultraviolet/ozone-treated GBs and the electrical characterization of graphene devices with sub-micrometer channel lengths.more » « less
-
more » « less
It is known that the grain size plays a major role in the mechanical properties of magnesium. The aim of the present study is to evaluate its role in long‐term corrosion rate. Samples of pure magnesium with grain sizes in the range of 0.9–82 μm are produced through severe plastic deformation and annealing treatments. The mechanical properties are evaluated using tensile tests and the corrosion behavior is evaluated using immersion tests in Hank's solution. A maximum yield stress of ≈150 MPa is observed in the sample with 1.8 μm of grain size and an elongation larger than 25% is observed in the ultrafine‐grained sample. Ultrafine‐ and fine‐grained magnesium display uniform corrosion with a decreasing corrosion rate while coarse‐grained magnesium displays localized corrosion with an accelerated corrosion rate. A corrosion rate of ≈0.2 mm year−1is observed in the ultrafine‐ and fine‐grained magnesium. The corrosion product layer of the fine‐grained magnesium contains elements absorbed from the media. An analysis of the data in the literature suggests that grain refinement changes the corrosion type from localized to uniform corrosion. The exact relationship between grain size and the corrosion rate remains elusive.
