skip to main content


Title: Synthesis, Structure, Photoluminescence, and Electroluminescence of Four Europium Complexes: Fabrication of Pure Red Organic Light-Emitting Diodes from Europium Complexes: Synthesis, Structure, Photoluminescence, and Electroluminescence of Four Europium Complexes: Fabrication of Pure Red Organic Light-Emitting Diodes fro
NSF-PAR ID:
10038297
Author(s) / Creator(s):
 ;  ;  ;  ;  ;  
Publisher / Repository:
Wiley Blackwell (John Wiley & Sons)
Date Published:
Journal Name:
European Journal of Inorganic Chemistry
Volume:
2017
Issue:
30
ISSN:
1434-1948
Page Range / eLocation ID:
3644 to 3654
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Abstract

    Disorder‐induced inhomogeneity in blue‐fluorescent‐based organic light‐emitting diodes (OLEDs) based on mixtures of host and guest molecules is studied using magneto‐electroluminescence, MEL(B), response based on the so called “Δgmechanism”, where Δgis the difference in the Landég‐factor of electrons and holes. The disorder in the organic active layer is manifested by a unique non‐Lorentzian MEL(B) response that is analyzed using a distribution of spin lifetimes for the injected electron–hole pairs that is determined by a dispersive parameter, α (<1). The carriers’ inhomogeneous response also influences the free carrier absorption spectrum, which shows characteristic properties described by a dispersive parameter β (<1). From the measured MEL(B) response at various injection conditions it is found that α is robust at increasing current density showing that the inhomogeneity is governed by intrinsic disorder in the device active layer. Also the obtained increase in α at low temperature indicates that the organic layer becomes more ordered, where longer‐lived electron–hole spin pairs are formed.

     
    more » « less
  2. Abstract

    Zero‐dimensional (0D) organic metal halide hybrids (OMHHs) have recently emerged as a new class of light emitting materials with exceptional color tunability. While near‐unity photoluminescence quantum efficiencies (PLQEs) are routinely obtained for a large number of 0D OMHHs, it remains challenging to apply them as emitter for electrically driven light emitting diodes (LEDs), largely due to the low conductivity of wide bandgap organic cations. Here, the development of a new OMHH, triphenyl(9‐phenyl‐9H‐carbazol‐3‐yl) phosphonium antimony bromide (TPPcarzSbBr4), as emitter for efficient LEDs, which consists of semiconducting organic cations (TPPcarz+) and light emitting antimony bromide anions (Sb2Br82−), is reported. By replacing one of the phenyl groups in a well‐known tetraphenylphosphonium cation (TPP+) with an electroactive phenylcarbazole group, a semiconducting TPPcarz+cation is developed for the preparation of red emitting 0D TPPcarzSbBr4single crystals with a high PLQE of 93.8%. With solution processed TPPcarzSbBr4thin films (PLQE of 86.1%) as light emitting layer, red LEDs are fabricated to exhibit an external quantum efficiency (EQE) of 5.12%, a peak luminance of 5957 cd m−2, and a current efficiency of 14.2 cd A−1, which are the best values reported to date for electroluminescence devices based on 0D OMHHs.

     
    more » « less
  3. This study presents the synthesis and characterization of two spirobifluorenyl derivatives substituted with either triphenylmethyl (SB-C) or triphenylsilyl (SB-Si) moieties for use as host materials in phosphorescent organic light-emitting diodes (PHOLED). Both molecules have similar high triplet energies and large energy gaps. Blue Ir(tpz)3 and green Ir(ppy)3 phosphorescent devices were fabricated using these materials as hosts. Surprisingly, SB-Si demonstrated superior charge-transporting ability compared to SB-C, despite having similar energies for their valence orbitals. In particular, SB-Si proved to be a highly effective host for both blue and green devices, resulting in maximum efficiencies of 12.6% for the Ir(tpz)3 device and 9.6% for the Ir(ppy)3 device. These results highlight the benefits of appending the triphenylsilyl moiety onto host materials and underscore the importance of considering the morphology of hosts in the design of efficient PHOLEDs.

     
    more » « less