skip to main content


Title: Polymeric 3D printed structures for soft‐tissue engineering
ABSTRACT

Three‐dimensional (3D) printing, or rapid prototyping, is a fabrication technique that is used for various engineering applications with advantages such as mass production and fine tuning of spatial‐dimensional properties. Recently, this fabrication method has been adopted for tissue engineering applications due to its ability to finely tune porosity and create precise, uniform, and repeatable structures. This review aims to introduce 3D printing applications in soft‐tissue engineering and regenerative medicine including state‐of‐the‐art scaffolds and key future challenges. Furthermore, 3D printing of individual cells, an evolution of traditional 3D printing technology which represents a cutting‐edge technique for the creation of cell seeded scaffoldsin vitro, is discussed. Key advances demonstrate the advantages of 3D printing, while also highlighting potential shortcomings to improve upon. It is clear that as 3D printing technology continues to develop, it will serve as a truly revolutionary means for fabrication of structures and materials for regenerative applications. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci.2018,135, 45569.

 
more » « less
PAR ID:
10041567
Author(s) / Creator(s):
 ;  ;  ;  ;  ;  
Publisher / Repository:
Wiley Blackwell (John Wiley & Sons)
Date Published:
Journal Name:
Journal of Applied Polymer Science
Volume:
135
Issue:
24
ISSN:
0021-8995
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Hydrogel scaffolds that mimic the native extracellular matrix (ECM) environment play a crucial role in tissue engineering. It has been demonstrated that cell behaviors can be affected by not only the hydrogel's physical and chemical properties, but also its three dimensional (3D) geometrical structures. In order to study the influence of 3D geometrical cues on cell behaviors as well as the maturation and function of engineered tissues, it is imperative to develop 3D fabrication techniques for creating micro and nanoscale hydrogel constructs. Among existing techniques that can effectively pattern hydrogels, two-photon polymerization (2PP)-based femtosecond laser 3D printing technology allows one to produce hydrogel structures with a resolution of 100 nm. This article reviews the basics of this technique and some of its applications in tissue engineering. 
    more » « less
  2. Abstract

    Bioprinting is an additive manufacturing technique that combines living cells, biomaterials, and biological molecules to develop biologically functional constructs. Three-dimensional (3D) bioprinting is commonly used as anin vitromodeling system and is a more accurate representation ofin vivoconditions in comparison to two-dimensional cell culture. Although 3D bioprinting has been utilized in various tissue engineering and clinical applications, it only takes into consideration the initial state of the printed scaffold or object. Four-dimensional (4D) bioprinting has emerged in recent years to incorporate the additional dimension of time within the printed 3D scaffolds. During the 4D bioprinting process, an external stimulus is exposed to the printed construct, which ultimately changes its shape or functionality. By studying how the structures and the embedded cells respond to various stimuli, researchers can gain a deeper understanding of the functionality of native tissues. This review paper will focus on the biomaterial breakthroughs in the newly advancing field of 4D bioprinting and their applications in tissue engineering and regeneration. In addition, the use of smart biomaterials and 4D printing mechanisms for tissue engineering applications is discussed to demonstrate potential insights for novel 4D bioprinting applications. To address the current challenges with this technology, we will conclude with future perspectives involving the incorporation of biological scaffolds and self-assembling nanomaterials in bioprinted tissue constructs.

     
    more » « less
  3. Three‐dimensional (3D) printing is an emerging technique that has shown promising success in engineering human tissues in recent years. Further development of vat‐photopolymerization printing modalities has significantly enhanced the complexity level for 3D printing of various functional structures and components. Similarly, the development of microfluidic chip systems is an emerging research sector with promising medical applications. This work demonstrates the coupling of a digital light processing (DLP) printing procedure with a microfluidic chip system to produce size‐tunable, 3D‐printable porosities with narrow pore size distributions within a gelatin methacryloyl (GelMA) hydrogel matrix. It is found that the generation of size‐tunable gas bubbles trapped within an aqueous GelMA hydrogel‐precursor can be controlled with high precision. Furthermore, the porosities are printed in two‐dimensional (2D) as well as in 3D using the DLP printer. In addition, the cytocompatibility of the printed porous scaffolds is investigated using fibroblasts, where high cell viabilities as well as cell proliferation, spreading, and migration are confirmed. It is anticipated that the strategy is widely applicable in a range of application areas such as tissue engineering and regenerative medicine, among others. 
    more » « less
  4. Abstract

    3D printing is a leading technique for fabricating tissue engineering scaffolds that facilitate native cellular behavior. Engineering scaffolds to possess functional properties like electronic conductivity is the first step toward integrating new technological capabilities like stimulating or monitoring cellular activity beyond the traditionally presented biophysical and biochemical cues. However, these bioelectronic scaffolds have been largely underdeveloped since the majority of electrically conducting materials possess high stiffness values outside the physiological range and that may negatively impact desired cell behavior. Here, methods of 3D printing poly(3,4‐ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) hydrogel scaffolds and techniques to achieve stiffness relevant to many soft tissues (<100 kPa) are reported. Structures are confirmed as ideal tissue scaffolds by maintaining biostability, promoting high cell viability, as well as appropriate cell morphology and proliferation. These findings present a customizable 3D platform that provides favorable soft cellular microenvironments and this  is envisioned to be adaptable to several bioelectronic applications.

     
    more » « less
  5. Abstract Digital light processing (DLP)-based three-dimensional (3D) printing technology has the advantages of speed and precision comparing with other 3D printing technologies like extrusion-based 3D printing. Therefore, it is a promising biomaterial fabrication technique for tissue engineering and regenerative medicine. When printing cell-laden biomaterials, one challenge of DLP-based bioprinting is the light scattering effect of the cells in the bioink, and therefore induce unpredictable effects on the photopolymerization process. In consequence, the DLP-based bioprinting requires extra trial-and-error efforts for parameters optimization for each specific printable structure to compensate the scattering effects induced by cells, which is often difficult and time-consuming for a machine operator. Such trial-and-error style optimization for each different structure is also very wasteful for those expensive biomaterials and cell lines. Here, we use machine learning to learn from a few trial sample printings and automatically provide printer the optimal parameters to compensate the cell-induced scattering effects. We employ a deep learning method with a learning-based data augmentation which only requires a small amount of training data. After learning from the data, the algorithm can automatically generate the printer parameters to compensate the scattering effects. Our method shows strong improvement in the intra-layer printing resolution for bioprinting, which can be further extended to solve the light scattering problems in multilayer 3D bioprinting processes. 
    more » « less