skip to main content


Title: Thermogelling, ABC Triblock Copolymer Platform for Resorbable Hydrogels with Tunable, Degradation‐Mediated Drug Release
Abstract

Clinical application of injectable, thermoresponsive hydrogels is hindered by lack of degradability and controlled drug release. To overcome these challenges, a family of thermoresponsive, ABC triblock polymer‐based hydrogels has been engineered to degrade and release drug cargo through either oxidative or hydrolytic/enzymatic mechanisms dictated by the “A” block composition. Three ABC triblock copolymers are synthesized with varying “A” blocks, including oxidation‐sensitive poly(propylene sulfide), slow hydrolytically/enzymatically degradable poly(ε‐caprolactone), and fast hydrolytically/enzymatically degradable poly(d,l‐lactide‐co‐glycolide), forming the respective formulations PPS135b‐PDMA152b‐PNIPAAM225(PDN), PCL85b‐PDMA150b‐PNIPAAM150(CDN), and PLGA60b‐PDMA148b‐PNIPAAM152(LGDN). For all three polymers, hydrophilic poly(N,N‐dimethylacrylamide) and thermally responsive poly(N‐isopropylacrylamide) comprise the “B” and “C” blocks, respectively. These copolymers form micelles in aqueous solutions at ambient temperature that can be preloaded with small molecule drugs. These solutions quickly transition into hydrogels upon heating to 37 °C, forming a supra‐assembly of physically crosslinked, drug‐loaded micelles. PDN hydrogels are selectively degraded under oxidative conditions while CDN and LGDN hydrogels are inert to oxidation but show differential rates of hydrolytic/enzymatic decomposition. All three hydrogels are cytocompatible in vitro and in vivo, and drug‐loaded hydrogels demonstrate differential release kinetics in vivo corresponding with their specific degradation mechanism. These collective data highlight the potential cell and drug delivery use of this tunable class of ABC triblock polymer thermogels.

 
more » « less
NSF-PAR ID:
10045914
Author(s) / Creator(s):
 ;  ;  ;  ;  
Publisher / Repository:
Wiley Blackwell (John Wiley & Sons)
Date Published:
Journal Name:
Advanced Functional Materials
Volume:
27
Issue:
47
ISSN:
1616-301X
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Abstract

    A series of glucose‐based degradable superabsorbent hydrogels with potential to tackle issues associated with sustainability, flooding, and drought has been designed and fabricated. These hydrophilic networks were constructed through integrating glucose as a primary building block –into cyclic oligomers and block polymers, which were combined into mechanically‐interlocked slide‐ring crosslinked materials. Crosslinking of slide ring α‐cyclodextrin/poly(ethylene glycol)‐type polyrotaxanes with acid‐functionalized ABA triblock copolymers comprised of mercaptopropionic acid‐functionalized poly(glucose carbonate (ethyl propargyl carbonate))‐b‐poly(ethylene glycol)‐b‐mercaptopropionic acid‐functionalized poly(glucose carbonate (ethyl propargyl carbonate)), afforded degradable superabsorbent hydrogels through establishment of chemically‐labile ester linkages, in addition to glycosidic and carbonate groups of the polymer precursors. With an emphasis on development of fundamental synthetic design strategies to achieve high‐performance superabsorbent hydrogels that could behave as robust materials, which are derived from natural components and exhibit hydrolytic degradability, effort went into optimization of the composition, structure, and topology leading to water uptake capacities >30× by mass. Investigations of composition‐structure‐topology‐morphology effects on properties as a function of variations of PEG main chain length, degree of α‐cyclodextrin coverage, and concentration of pre‐gel solution, indicated that the slide‐ring polymer and triblock copolymer networks feature high water uptake, tunable mechanical properties, and sustainability with construction from renewable natural products and in‐built degradability.

     
    more » « less
  2. Abstract

    In an effort to synthesize chemically recyclable thermoplastic elastomers, a redox‐switchable catalytic system was developed to synthesize triblock copolymers containing stiff poly(lactic acid) (PLA) end blocks and a flexible poly(tetrahydrofuran‐co‐cyclohexene oxide) (poly(THF‐co‐CHO) copolymer as the mid‐block. The orthogonal reactivity induced by changing the oxidation state of the iron‐based catalyst enabled the synthesis of the triblock copolymers in a single reaction flask from a mixture of monomers. The triblock copolymers demonstrated improved flexibility compared to poly(l‐lactic acid) (PLLA) and thermomechanical properties that resemble thermoplastic elastomers, including a rubbery plateau in the range of −60 to 40 °C. The triblock copolymers containing a higher percentage of THF versus CHO were more flexible, and a blend of triblock copolymers containing PLLA and poly(d‐lactic acid) (PDLA) end‐blocks resulted in a stereocomplex that further increased polymer flexibility. Besides the low cost of lactide and THF, the sustainability of this new class of triblock copolymers was also supported by their depolymerization, which was achieved by exposing the copolymers sequentially to FeCl3and ZnCl2/PEG under reactive distillation conditions.

     
    more » « less
  3. Abstract

    In an effort to synthesize chemically recyclable thermoplastic elastomers, a redox‐switchable catalytic system was developed to synthesize triblock copolymers containing stiff poly(lactic acid) (PLA) end blocks and a flexible poly(tetrahydrofuran‐co‐cyclohexene oxide) (poly(THF‐co‐CHO) copolymer as the mid‐block. The orthogonal reactivity induced by changing the oxidation state of the iron‐based catalyst enabled the synthesis of the triblock copolymers in a single reaction flask from a mixture of monomers. The triblock copolymers demonstrated improved flexibility compared to poly(l‐lactic acid) (PLLA) and thermomechanical properties that resemble thermoplastic elastomers, including a rubbery plateau in the range of −60 to 40 °C. The triblock copolymers containing a higher percentage of THF versus CHO were more flexible, and a blend of triblock copolymers containing PLLA and poly(d‐lactic acid) (PDLA) end‐blocks resulted in a stereocomplex that further increased polymer flexibility. Besides the low cost of lactide and THF, the sustainability of this new class of triblock copolymers was also supported by their depolymerization, which was achieved by exposing the copolymers sequentially to FeCl3and ZnCl2/PEG under reactive distillation conditions.

     
    more » « less
  4. This study describes the development of targeted, doxorubicin (DOX)‐loaded generation 5 (G5) polyamidoamine dendrimers able to achieve cell‐specific DOX delivery and release into the cytoplasm of hepatic cancer cells. G5 is functionalized with poly(ethylene glycol) (PEG) brushes displaying N‐acetylgalactosamine (NAcGal) ligands to target hepatic cancer cells. DOX is attached to G5 through one of two aromatic azo‐linkages, L3 or L4, achieving eitherP1((NAcGalβ‐PEGc)16.6‐G5‐(L3‐DOX)11.6) orP2((NAcGalβ‐PEGc)16.6‐G5‐(L4‐DOX)13.4) conjugates. After confirming the conjugates' biocompatibility, flow cytometry studies show P1/P2 achieve 100% uptake into hepatic cancer cells at 30–60 × 10−9mparticle concentration. This internalization correlates with cytotoxicity against HepG2 cells with 50% inhibitory concentration (IC50) values of 24.8, 1414.0, and 237.8 × 10−9mfor free DOX, P1, and P2, respectively. Differences in cytotoxicity prompted metabolomics analysis to identify the intracellular release behavior of DOX. Results show that P1/P2 release alternative DOX metabolites than free DOX. Stable isotope tracer studies show that the different metabolites induce different effects on metabolic cycles. Namely, free DOX reduces glycolysis and increases fatty acid oxidation, while P1/P2 increase glycolysis, likely as a response to high oxidative stress. Overall, P1/P2 conjugates offer a platform drug delivery technology for improving hepatic cancer therapy.

     
    more » « less
  5. Abstract

    Increased stiffness of Schlemm's canal endothelial cells (SC cells) is a major contributing factor to the increased pressure characteristic of primary open‐angle glaucoma. New treatments for glaucoma are being developed using actin depolymerizers and rho kinase inhibitors to address this increased stiffness. However, these agents have off‐target effects and are not as potent as had been hoped. We have developed a micellar nanocarrier assembled from poly(ethylene glycol)‐bl‐poly(propylene sulfide) copolymers capable of encapsulating latrunculin A (Lat A) with the goal of modulating SC cell stiffness. Lat A‐loaded nanocarriers were similar in size and morphology to unloaded poly (ethylene glycol)‐bl‐poly(propylene sulfide) (PEG‐bl‐PPS) micelles, loaded Lat A at 62% encapsulation efficiency, and retained loaded Lat A for at least 22 days. The continued functional activity of Lat A following encapsulation within micelles was verified in murine macrophages, which are known to display decreased endocytosis in response to Lat A‐dependent cytoskeletal disruption. Endocytic inhibition remained unchanged when comparing equal concentrations of micelle‐loaded versus free form Lat A. Uptake of Lat A‐loaded micelles by human SC cells was verifiedin vitrowith no sign of cytotoxicity, and modulation of SC cell stiffness was measured by atomic force microscopy. Lat A‐loaded micelles significantly decreased SC cell stiffness, which resulted in visible changes in cell morphology as observed by confocal microscopy. Our results demonstrate that PEG‐bl‐PPS micelles represent a tunable platform for the controlled intracellular delivery of latrunculin. These self‐assembled polymeric nanobiomaterials may support the rational design and engineering of delivery systems for the treatment of glaucoma. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 1771–1779, 2018.

     
    more » « less