skip to main content


Title: Measurement of the Na 2 51Σg+→A1Σu+ and 61Σg+→A1Σu+ transition dipole moments using optical-optical double resonance and Autler–Townes spectroscopy
NSF-PAR ID:
10047181
Author(s) / Creator(s):
 ;  ;  ;  ;  ;  
Publisher / Repository:
American Institute of Physics
Date Published:
Journal Name:
The Journal of Chemical Physics
Volume:
147
Issue:
20
ISSN:
0021-9606
Page Range / eLocation ID:
204301
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Temperature dependent Raman intensity of 2D materials features very rich information about the material's electronic structure, optical properties, and nm-level interface spacing. To date, there still lacks rigorous consideration of the combined effects. This renders the Raman intensity information less valuable in material studies. In this work, the Raman intensity of four supported multilayered WS 2 samples are studied from 77 K to 757 K under 532 nm laser excitation. Resonance Raman scattering is observed, and we are able to evaluate the excitonic transition energy of B exciton and its broadening parameters. However, the resonance Raman effects cannot explain the Raman intensity variation in the high temperature range (room temperature to 757 K). The thermal expansion mismatch between WS 2 and Si substrate at high temperatures (room temperature to 757 K) make the optical interference effects very strong and enhances the Raman intensity significantly. This interference effect is studied in detail by rigorously calculating and considering the thermal expansion of samples, the interface spacing change, and the optical indices change with temperature. Considering all of the above factors, it is concluded that the temperature dependent Raman intensity of the WS 2 samples cannot be solely interpreted by its resonance behavior. The interface optical interference impacts the Raman intensity more significantly than the change of refractive indices with temperature. 
    more » « less
  2. Abstract

    Photonic integrated circuits require various optical materials with versatile optical properties and easy on‐chip device integration. To address such needs, a well‐designed nanoscale metal‐oxide metamaterial, that is, plasmonic Au nanoparticles embedded in nonlinear LiNbO3(LNO) matrix, is demonstrated with tailorable optical response. Specifically, epitaxial and single‐domain LNO thin films with tailored Au nanoparticle morphologies (i.e., various nanoparticle sizes and densities), are grown by a pulsed laser deposition method. The optical measurement presents obvious surface plasmon resonance and dramatically varied complex dielectric function because of the embedded Au nanoparticles, and its response can be well tailored by varying the size and density of Au nanoparticles. An optical waveguide structure based on the thin film stacks of a‐Si on SiO2/Au‐LNO is fabricated and exhibits low optical dispersion with an optimized evanescent field staying in the LNO‐Au active layer. The hybrid Au‐LNO metamaterial thin films provide a novel platform for tunable optical materials and their future on‐chip integrations in photonic‐based integrated circuits.

     
    more » « less
  3. Abstract

    The new compounds Li2Mg2Si2S6and Li2Mg2Ge2S6have been prepared via traditional high‐temperature, solid‐state synthesis. The title compounds crystallize in the polar, noncentrosymmetric, trigonal space groupP31m(No. 157) and adopt a new structure type featuring staggered, ethane‐like (T2S6)6−units, where T=Si or Ge. These (T2S6)6−units are nestled within the holes of magnesium‐sulfide “layers” that are created through the edge‐sharing of MgS6octahedra. The holes found in the lithium‐sulfide “layers”, created by LiS6edge‐sharing octahedra, remain vacant, containing no (T2S6)6−anionic group. Through the face sharing of the respective MgS6and LiS6octahedra, the magnesium‐sulfide and lithium‐sulfide “layers” are stitched together resulting in an overall three‐dimensional structure. The optical bandgaps of Li2Mg2Si2S6and Li2Mg2Ge2S6are 3.24 and 3.18 eV, respectively, as estimated from optical diffuse reflectance UV‐Vis‐NIR spectroscopy. The compounds exhibit second harmonic generation responses of ∼0.24×KDP and ∼2.92×α‐quartz for Li2Mg2Si2S6and ∼0.17×KDP and ∼2.08×α‐quartz for Li2Mg2Ge2S6, using a Nd:YAG laser at 1.064 μm. Electronic structure calculations were performed using density functional theory and the linearized augmented plane‐wave approach within the WIEN2k software package. Examination of the electronic band structures shows that these compounds are indirect bandgap semiconductors.

     
    more » « less
  4. Two novel ternary compounds from the pseudobinary CH3NH3X–AgX (X = Br, I) phase diagrams are reported. CH3NH3AgBr2 and CH3NH3Ag2I3 were synthesized via solid state sealed tube reactions and the crystal structures were determined through a combination of single crystal and synchrotron X-ray powder diffraction. Structurally, both compounds consist of one-dimensional ribbons built from silvercentered tetrahedra. The structure of CH3NH3AgBr2 possesses orthorhombic Pnma symmetry and is made up of zig-zag chains where each silver bromide tetrahedron shares two edges with neighboring tetrahedra. The tetrahedral coordination of silver is retained in CH3NH3Ag2I3, which has monoclinic P21/m symmetry, but the change in stoichiometry leads to a greater degree of edge-sharing connectivity within the silver iodide chains. With band gaps of 3.3 eV (CH3NH3Ag2I3) and 4.0 eV (CH3NH3AgBr2) the absorption onsets of the ternary phases are significantly blue shifted from the binary silver halides, AgBr and AgI, due in part to the decrease in electronic dimensionality. The compounds are stable for at least one month under ambient conditions and are thermally stable up to approximately 200 1C. Density functional theory calculations reveal very narrow valence bands and moderately disperse conduction bands with Ag 5s character. Bond valence calculations are used to analyze the hydrogen bonding between methylammonium cations and coordinatively unsaturated halide ions. The crystal chemistry of these compounds helps to explain the dearth of iodide double perovskites in the literature.

     
    more » « less