skip to main content


Title: 3D Printing of Living Responsive Materials and Devices
Abstract

3D printing has been intensively explored to fabricate customized structures of responsive materials including hydrogels, liquid‐crystal elastomers, shape‐memory polymers, and aqueous droplets. Herein, a new method and material system capable of 3D‐printing hydrogel inks with programed bacterial cells as responsive components into large‐scale (3 cm), high‐resolution (30 μm) living materials, where the cells can communicate and process signals in a programmable manner, are reported. The design of 3D‐printed living materials is guided by quantitative models that account for the responses of programed cells in printed microstructures of hydrogels. Novel living devices are further demonstrated, enabled by 3D printing of programed cells, including logic gates, spatiotemporally responsive patterning, and wearable devices.

 
more » « less
NSF-PAR ID:
10047708
Author(s) / Creator(s):
 ;  ;  ;  ;  ;  ;  ;  ;  
Publisher / Repository:
Wiley Blackwell (John Wiley & Sons)
Date Published:
Journal Name:
Advanced Materials
Volume:
30
Issue:
4
ISSN:
0935-9648
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Abstract

    Shape morphing materials have been extensively studied to control the formation of sophisticated three-dimensional (3D) structures and devices for a broad range of applications. Various methods, including the buckling of pre-strained bilayer composites, stimuli-responsive shape-shifting of shape memory polymers, and hydrogels, have been previously employed to transform 2D sheets to 3D structures and devices. However, the residual stress locked in these shape-shifting structures will drive them to gradually revert to their original layouts upon the removal of external stimuli or constrains. Here, we report a multistimuli-responsive vitrimer (m-vitrimer) bearing thermal- and photo-reversible disulfide bonds as shape programmable and healable materials for functional 3D devices. The mechanical properties and thermomechanical properties of vitrimer were tuned by altering the disulfide content and catalyst loading. Heat and light exposure induces effective stress relaxation and network rearrangement, enabling material shape programming and healing. We demonstrate that printed flexible smart electronics are fabricated using the m-vitrimer as a matrix and printed conductive silver nanoparticles as conductive wire. The printed electronics possess good electro-mechanical properties, strong interfacial bonding, and thermal- and photo-responsive shape programming. Moreover, the m-vitrimer can be healed upon damage by heat and light, which partially restores silver conductivity and protect the electronics from further damage. The converging of multi-stimuli-responsive polymers and printed electronics for functional 3D devices have the potential of finding broad applications in smart and morphing electronics, biomedical devices, and 4D printing.

     
    more » « less
  2. Abstract

    Stimuli responsive hydrogels that can change shape in response to applied external stimuli are appealing for soft robotics, biomedical devices, drug delivery, and actuators. However, existing 3D printed shape morphing materials are non‐biodegradable, which limits their use in biomedical applications. Here, 3D printed protein‐based hydrogels are developed and applied for programmable structural changes under the action of temperature, pH, or an enzyme. Key to the success of this strategy is the use of methacrylated bovine serum albumin (MA–BSA) as a biodegradable building block to Pickering emulsion gels in the presence ofN‐isopropylacrylamide or 2‐dimethylaminoethyl methacrylate. These shear‐thinning gels are ideal for direct ink write (DIW) 3D printing of multi‐layered stimuli‐responsive hydrogels. While poly(N‐isopropylacrylamide) and poly(dimethylaminoethyl methacrylate) introduce temperature and pH‐responsive properties into the printed objects, a unique feature of this strategy is an enzyme‐triggered shape transformation based on the degradation of the bovine serum albumin network. To highlight this technique, protein‐based hydrogels that reversibly change shape based on environmental temperature and pH are fabricated, and irreversibly altered by enzymatic degradation, which demonstrates the complexity that can be introduced into 4D printed systems.

     
    more » « less
  3. Abstract

    The encapsulation of cells within gel‐phase materials to form bioinks offers distinct advantages for next‐generation 3D bioprinting. 3D bioprinting has emerged as a promising tool for patterning cells, but the technology remains limited in its ability to produce biofunctional, tissue‐like constructs due to a dearth of materials suitable for bioinks. While early demonstrations commonly used viscous polymers optimized for printability, these materials often lacked cell compatibility and biological functionality. In response, advanced materials that exist in the gel phase during the entire printing process are being developed, since hydrogels are uniquely positioned to both protect cells during extrusion and provide biological signals to embedded cells as the construct matures during culture. Here, an overview of the design considerations for gel‐phase materials as bioinks is presented, with a focus on their mechanical, biochemical, and dynamic gel properties. Current challenges and opportunities that arise due to the fact that bioprinted constructs are active, living hydrogels composed of both acellular and cellular components are also evaluated. Engineering hydrogels with consideration of cells as an intrinsic component of the printed bioink will enable control over the evolution of the living construct after printing to achieve greater biofunctionality.

     
    more » « less
  4. Abstract

    The field of engineered living materials lies at the intersection of materials science and synthetic biology with the aim of developing materials that can sense and respond to the environment. In this study, we use 3D printing to fabricate a cyanobacterial biocomposite material capable of producing multiple functional outputs in response to an external chemical stimulus and demonstrate the advantages of utilizing additive manufacturing techniques in controlling the shape of the fabricated photosynthetic material. As an initial proof-of-concept, a synthetic riboswitch is used to regulate the expression of a yellow fluorescent protein reporter inSynechococcus elongatusPCC 7942 within a hydrogel matrix. Subsequently, a strain ofS. elongatusis engineered to produce an oxidative laccase enzyme; when printed within a hydrogel matrix the responsive biomaterial can decolorize a common textile dye pollutant, indigo carmine, potentially serving as a tool in environmental bioremediation. Finally, cells are engineered for inducible cell death to eliminate their presence once their activity is no longer required, which is an important function for biocontainment and minimizing environmental impact. By integrating genetically engineered stimuli-responsive cyanobacteria in volumetric 3D-printed designs, we demonstrate programmable photosynthetic biocomposite materials capable of producing functional outputs including, but not limited to, bioremediation.

     
    more » « less
  5. Abstract

    A rapid and facile approach to predictably control integration between two materials with divergent properties is introduced. Programmed integration between photopolymerizable soft and stiff hydrogels is investigated due to their promise in applications such as tissue engineering where heterogeneous properties are often desired. The spatial control afforded by grayscale 3D printing is leveraged to define regions at the interface that permit diffusive transport of a second material in‐filled into the 3D printed part. The printing parameters (i.e., effective exposure dose) for the resin are correlated directly to mesh size to achieve controlled diffusion. Applying this information to grayscale exposures leads to a range of distances over which integration is achieved with high fidelity. A prescribed finite distance of integration between soft and stiff hydrogels leads to a 33% increase in strain to failure under tensile testing and eliminates failure at the interface. The feasibility of this approach is demonstrated in a layer‐by‐layer 3D printed part fabricated by stereolithography, which is subsequently infilled with a soft hydrogel containing osteoblastic cells. In summary, this approach holds promise for applications where integration of multiple materials and living cells is needed by allowing precise control over integration and reducing mechanical failure at contrasting material interfaces.

     
    more » « less