skip to main content


Title: Connecting the Mechanical and Conductive Properties of Conjugated Polymers
Abstract

Both the mechanical deformability and electronic conductivity of conjugated polymers play important roles in the development of wearable and stretchable electronics. Despite the recent progress and emphasis on achieving highly stretchable and conductive devices, the correlation between the mechanical and conductive properties is poorly understood and remains mostly empirical. The future of flexible electronics relies on the ability to predict and tune the mechanical and conductive properties such that the molecular design of conjugated polymers can be optimized for various applications. Instead of seeking a direct correlation between mechanical and conductive properties, this Progress Report proposes to examine the common microstructural origin for mechanical performance and charge transport in conjugated polymers. Measurements of microstructural information, such as persistence length, chain entanglement, glass transition, liquid crystalline phase transition, and intercrystalline morphology, are desperately needed in the field of conjugated polymers in order to establish connections with both the mechanical/conductive properties and the chemical structures. Conventional experimental methods in the field of flexible polymer physics, such as linear viscoelastic rheometry, open up new avenues for characterizing these microstructural parameters, thereby providing a path toward predicting and designing the molecular structure of conjugated polymers with desired mechanical and conductive properties.

 
more » « less
PAR ID:
10047956
Author(s) / Creator(s):
 ;  ;  
Publisher / Repository:
Wiley Blackwell (John Wiley & Sons)
Date Published:
Journal Name:
Advanced Electronic Materials
Volume:
4
Issue:
10
ISSN:
2199-160X
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Abstract

    π‐Conjugated polymers have drawn broad interest in flexible electronics due to their solution processability, light weight, and a combination of conducting and light‐emitting properties. However, achieving mechanical endurance and stretchability in freestanding conjugated polymers is still difficult. Surface‐assembly‐induced light‐emitting polymer nanosheets with prodigious mechanical strength and charge transport are reported. Transferring freestanding polymer films onto various templates with conformal contact results in electrical and optical strain sensors with a gauge factor of ≈29. Subsequent geometric engineering into kirigami structures of the polymer sheets further extends the strain accommodations 20‐fold without compromising electric conductivity or fluorescence properties. These as‐prepared semiconducting polymers represent a possible new material for emerging stretchable electronics.

     
    more » « less
  2. Abstract

    Conjugated polymers are emerging as promising building blocks for a broad range of modern applications including skin‐like electronics, wearable optoelectronics, and sensory technologies. In the past three decades, the optical and electronic properties of conjugated polymers have been extensively studied, while their thermomechanical properties, especially the glass transition phenomenon which fundamentally represents the polymer chain dynamics, have received much less attention. Currently, there is a lack of design rules that underpin the glass transition temperature of these semirigid conjugated polymers, putting a constraint on the rational polymer design for flexible stretchable devices and stable polymer glass that is needed for the devices’ long‐term morphology stability. In this review article, the glass transition phenomenon for polymers, glass transition theories, and characterization techniques are first discussed. Then previous studies on the glass transition phenomenon of conjugated polymers are reviewed and a few empirical design rules are proposed to fine‐tune the glass transition temperature for conjugated polymers. The review paper is finished with perspectives on future directions on studying the glass transition phenomena of conjugated polymers. The goal of this perspective is to draw attention to challenges and opportunities of controlling, predicting, and designing polymeric semiconductors, specifically to accommodate their end use.

     
    more » « less
  3. Abstract

    The glass transition temperature (Tg) is a key property that dictates the applicability of conjugated polymers. TheTgdemarks the transition into a brittle glassy state, making its accurate prediction for conjugated polymers crucial for the design of soft, stretchable, or flexible electronics. Here we show that a single adjustable parameter can be used to build a relationship between theTgand the molecular structure of 32 semiflexible (mostly conjugated) polymers that differ drastically in aromatic backbone and alkyl side chain chemistry. An effective mobility value,ζ, is calculated using an assigned atomic mobility value within each repeat unit. The only adjustable parameter in the calculation ofζis the ratio of mobility between conjugated and non-conjugated atoms. We show thatζcorrelates strongly to theTg, and that this simple method predicts theTgwith a root-mean-square error of 13 °C for conjugated polymers with alkyl side chains.

     
    more » « less
  4. Abstract

    Organic semiconducting donor–acceptor polymers are promising candidates for stretchable electronics owing to their mechanical compliance. However, the effect of the electron‐donating thiophene group on the thermomechanical properties of conjugated polymers has not been carefully studied. Here, thin‐film mechanical properties are investigated for diketopyrrolopyrrole (DPP)‐based conjugated polymers with varying numbers of isolated thiophene moieties and sizes of fused thiophene rings in the polymer backbone. Interestingly, it is found that these thiophene units act as an antiplasticizer, where more isolated thiophene rings or bigger fused rings result in an increased glass transition temperature (Tg) of the polymer backbone, and consequently elastic modulus of the respective DPP polymers. Detailed morphological studies suggests that all samples show similar semicrystalline morphology. This antiplasticization effect also exists inpara‐azaquinodimethane‐based conjugated polymers, indicating that this can be a general trend for various conjugated polymer systems. Using the knowledge gained above, a new DPP‐based polymer with increased alkyl side chain density through attaching alky chains to the thiophene unit is engineered. The new DPP polymer demonstrates a record lowTg, and 50% lower elastic modulus than a reference polymer without side‐chain decorated on the thiophene unit. This work provides a general design rule for making low‐Tgconjugated polymers for stretchable electronics.

     
    more » « less
  5. Abstract

    There is great interest in developing conductive biomaterials for the manufacturing of sensors or flexible electronics with applications in healthcare, tracking human motion, or in situ strain measurements. These biomaterials aim to overcome the mismatch in mechanical properties at the interface between typical rigid semiconductor sensors and soft, often uneven biological surfaces or tissues for in vivo and ex vivo applications. Here, the use of biobased carbons to fabricate conductive, highly stretchable, flexible, and biocompatible silk‐based composite biomaterials is demonstrated. Biobased carbons are synthesized via hydrothermal processing, an aqueous thermochemical method that converts biomass into a carbonaceous material that can be applied upon activation as conductive filler in composite biomaterials. Experimental synthesis and full‐atomistic molecular dynamics modeling are combined to synthesize and characterize these conductive composite biomaterials, made entirely from renewable sources and with promising applications in fields like biomedicine, energy, and electronics.

     
    more » « less