The programmable assembly of innervated LCE actuators (iLCEs) with prescribed contractile actuation, self‐sensing, and closed loop control via core–shell 3D printing is reported. This extrusion‐based direct ink writing method enables coaxial filamentary features composed of pure LM core surrounded by an LCE shell, whose director is aligned along the print path. Specifically, the thermal response of the iLCE fiber‐type actuators is programmed, measured, and modeled during Joule heating, including quantifying the concomitant changes in fiber length and resistance that arise during simultaneous heating and self‐sensing. Due to their reversible, high‐energy actuation and their resistive feedback, it is also demonstrated that iLCEs can be regulated with closed loop control even when perturbed with large bias loads. Finally, iLCE architectures capable of programmed, self‐sensing 3D shape change with closed loop control are fabricated.
Liquid crystal elastomers (LCEs) are soft materials capable of large, reversible shape changes, which may find potential application as artificial muscles, soft robots, and dynamic functional architectures. Here, the design and additive manufacturing of LCE actuators (LCEAs) with spatially programed nematic order that exhibit large, reversible, and repeatable contraction with high specific work capacity are reported. First, a photopolymerizable, solvent‐free, main‐chain LCE ink is created via aza‐Michael addition with the appropriate viscoelastic properties for 3D printing. Next, high operating temperature direct ink writing of LCE inks is used to align their mesogen domains along the direction of the print path. To demonstrate the power of this additive manufacturing approach, shape‐morphing LCEA architectures are fabricated, which undergo reversible planar‐to‐3D and 3D‐to‐3D′ transformations on demand, that can lift significantly more weight than other LCEAs reported to date.
more » « less- PAR ID:
- 10049613
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Advanced Materials
- Volume:
- 30
- Issue:
- 10
- ISSN:
- 0935-9648
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
Abstract -
Abstract Liquid crystal elastomers (LCE) are appealing candidates among active materials for 4D printing, due to their reversible, programmable and rapid actuation capabilities. Recent progress has been made on direct ink writing (DIW) or Digital Light Processing (DLP) to print LCEs with certain actuation. However, it remains a challenge to achieve complicated structures, such as spatial lattices with large actuation, due to the limitation of printing LCEs on the build platform or the previous layer. Herein, a novel method to 4D print freestanding LCEs on‐the‐fly by using laser‐assisted DIW with an actuation strain up to −40% is proposed. This process is further hybridized with the DLP method for optional structural or removable supports to create active 3D architectures in a one‐step additive process. Various objects, including hybrid active lattices, active tensegrity, an actuator with tunable stability, and 3D spatial LCE lattices, can be additively fabricated. The combination of DIW‐printed functionally freestanding LCEs with the DLP‐printed supporting structures thus provides new design freedom and fabrication capability for applications including soft robotics, smart structures, active metamaterials, and smart wearable devices.
-
Abstract Liquid crystal elastomers (LCEs) are a class of stimuli‐responsive materials that have been intensively studied for applications including artificial muscles, shape morphing structures, and soft robotics due to their capability of large, programmable, and fully reversible actuation strains. To fully take advantage of LCEs, rapid, untethered, and programmable actuation methods are highly desirable. Here, a liquid crystal elastomer‐liquid metal (LCE‐LM) composite is reported, which enables ultrafast and programmable actuations by eddy current induction heating. The composite consists of LM sandwiched between two LCE layers printed via direct ink writing (DIW). When subjected to a high‐frequency alternating magnetic field, the composite is actuated in milliseconds. By moving the magnetic field, the eddy current is spatially controlled for selective actuation. Additionally, sequential actuation is achievable by programming the LM thickness distribution in a sample. With these capabilities, the LCE‐LM composite is further exploited for multimodal deformation of a pop‐up structure, on‐ground omnidirectional robotic motion, and in‐water targeted object manipulation and crawling.
-
Abstract Shape‐morphing magnetic soft materials, composed of magnetic particles in a soft polymer matrix, can transform shape reversibly, remotely, and rapidly, finding diverse applications in actuators, soft robotics, and biomedical devices. To achieve on‐demand and sophisticated shape morphing, the manufacture of structures with complex geometry and magnetization distribution is highly desired. Here, a magnetic dynamic polymer (MDP) composite composed of hard‐magnetic microparticles in a dynamic polymer network with thermally responsive reversible linkages, which permits functionalities including targeted welding for magnetic‐assisted assembly, magnetization reprogramming, and permanent structural reconfiguration, is reported. These functions not only provide highly desirable structural and material programmability and reprogrammability but also enable the manufacturing of functional soft architected materials such as 3D kirigami with complex magnetization distribution. The welding of magnetic‐assisted modular assembly can be further combined with magnetization reprogramming and permanent reshaping capabilities for programmable and reconfigurable architectures and morphing structures. The reported MDP are anticipated to provide a new paradigm for the design and manufacture of future multifunctional assemblies and reconfigurable morphing architectures and devices.
-
Fabricating complex structures on micro‐ and mesoscales is a critical aspect in the design of advanced sensors and soft electronics. However, soft lithographic methods offer an important approach to fabricating such structures, the progress in the field of additive manufacturing (e.g., 3D printing) offers methods of fabrication with much more material complexity. The rheological complexity of the printing material, however, often dictates the limitations of printing. In particular, the challenges involved in synthesizing printing materials that can enable shape retention at smaller scales (<100 μm), yet be conductive, limits many applications of 3D printing to soft microelectronics. Herein, a printing‐centered approach using a novel particle‐free conductive emulsion ink is presented. This approach separates the printing and polymerization of a conductive monomer (pyrrole) and renders a novel ink that is used to print filaments with heretofore impossible to realize 3D feature dimensions and build structures with high shape retention. The printability of the ink is evaluated, and post‐treatment properties assessed. Multidirectional strain sensors are printed using the emulsion ink to illustrate an exemplary application in soft electronics.