Shape‐memory polymers (SMPs) are an intriguing class of smart materials possessing reversible shape change and recovery capabilities. Effective routes to shape‐memory porous films (SMPFs) are few and limited in scope owing to the difficulty in manipulating the shape change of pores by conventional methods. Herein we report an unconventional strategy for crafting light‐driven SMPFs by judiciously constructing highly ordered porous films via a facile “breath figure” approach, followed by sequential vapor crosslinking and nondestructive directional light manipulation. Micropores can thus be transformed into other shapes including rectangle, rhombus and size‐reduced micropores at room temperature. The transformed micropores can be reverted to their original shapes by either thermal annealing or UV irradiation. As such, this strategy expands the rich diversity of SMPs accessible.
Shape‐memory polymers (SMPs) are an intriguing class of smart materials possessing reversible shape change and recovery capabilities. Effective routes to shape‐memory porous films (SMPFs) are few and limited in scope owing to the difficulty in manipulating the shape change of pores by conventional methods. Herein we report an unconventional strategy for crafting light‐driven SMPFs by judiciously constructing highly ordered porous films via a facile “breath figure” approach, followed by sequential vapor crosslinking and nondestructive directional light manipulation. Micropores can thus be transformed into other shapes including rectangle, rhombus and size‐reduced micropores at room temperature. The transformed micropores can be reverted to their original shapes by either thermal annealing or UV irradiation. As such, this strategy expands the rich diversity of SMPs accessible.
more » « less- NSF-PAR ID:
- 10050383
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Angewandte Chemie
- Volume:
- 130
- Issue:
- 8
- ISSN:
- 0044-8249
- Page Range / eLocation ID:
- p. 2161-2165
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
Abstract -
more » « less
ABSTRACT Shape memory polymers (SMPs) are a class of responsive polymers that have attracted attention in designing biomedical devices because of their potential to improve minimally invasive surgeries. Use of porous SMPs in vascular grafts has been proposed because porosity aids in transfer of fluids through the graft and growth of vascular tissue. However, porosity also allows blood to leak through grafts so preclotting the materials is necessary. Here hydrogels have been synthesized from acrylic acid and
N ‐hydroxyethyl acrylamide and coated around a porous SMP produced from lactose functionalized polyurea‐urethanes. The biocompatibility of the polymers used to prepare the cross‐linked shape memory material is demonstrated using anin vitro cell assay. As expected, the hydrogel coating enhanced fluid uptake abilities without hindering the shape memory properties. These results indicate that hydrogels can be used in porous SMP materials without inhibiting the shape recovery of the material. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1389–1395 -
more » « less
Abstract Thermoset shape memory polymers (SMPs) have a series of advantages in practical applications when compared with thermoplastic SMPs. However, the reprocessing and reshaping of thermosets are difficult due to the covalent crosslinking which severely limits the reconfiguration of polymer networks even under high temperature. Here, hinered urea bond (HUB), a urea bearing a bulky substituent on its nitrogen atom that can reversibly dissociate to the corresponding bulky amine and isocyanate, is integrated into the poly(urea‐urethane) (PUU) crosslinked networks, enabling the networks to topologically reconfigure to other structures. Instead of having to cure the thermoset in a mold, the incorporation of HUBs can decouple the synthesis and shape‐forming steps, which is a huge advantage for the processing of thermoset materials compared to conventional thermosets. This new PUU thermoset shows a broad glass transition behavior and exhibits excellent triple‐shape‐memory performance. With the incorporation of this dynamic urea bonds, permanent shapes can be flexibly tuned via the network reconfiguration, which is often neglected but significant to the practical application of SMPs.
-
more » « less
Wrinkle topographies have been studied as simple, versatile, and in some cases biomimetic surface functionalization strategies. To fabricate surface wrinkles, one material phenomenon employed is the mechanical-instability-driven wrinkling of thin films, which occurs when a deforming substrate produces sufficient compressive strain to buckle a surface thin film. Although thin-film wrinkling has been studied on shape-changing functional materials, including shape-memory polymers (SMPs), work to date has been primarily limited to simple geometries, such as flat, uniaxially-contracting substrates. Thus, there is a need for a strategy that would allow deformation of complex substrates or 3D parts to generate wrinkles on surfaces throughout that complex substrate or part. Here, 4D printing of SMPs is combined with polymeric and metallic thin films to develop and study an approach for fiber-level topographic functionalization suitable for use in printing of arbitrarily complex shape-changing substrates or parts. The effect of nozzle temperature, substrate architecture, and film thickness on wrinkles has been characterized, as well as wrinkle topography on nuclear alignment using scanning electron microscopy, atomic force microscopy, and fluorescent imaging. As nozzle temperature increased, wrinkle wavelength increased while strain trapping and nuclear alignment decreased. Moreover, with increasing film thickness, the wavelength increased as well.
-
Abstract In response to external stimuli, such as heat, light, or magnetic fields, stimuli-responsive soft materials can change their current configuration to a new equilibrium state through non-equilibrium kinetic processes, including reaction, diffusion, and viscoelastic relaxation, which generates novel spatiotemporal shape-morphing behavior. Using a photothermal shape memory polymer (SMP) cantilever beam as a model system, this work analytically, numerically, and experimentally studies its non-equilibrium kinetic processes and spatiotemporal bending under light illumination. We establish a thermomechanical model for SMPs capturing the concurrent non-equilibrium processes of heat transfer and viscoelastic relaxation, which induces inhomogeneous temperature and strain distributions through the thickness of the beam, resulting in its bending and unbending. By varying the key dimensionless parameters, we theoretically and experimentally observe different types of bending dynamics. Moreover, our theory takes into consideration changes in the angles of incidence caused by extensive beam bending, and demonstrates that this effect can dramatically delay the bending due to reduction of the effective light intensity, which is further validated experimentally. This work demonstrates programmable and predictable spatiotemporal morphing of SMPs, and provides design guidelines for SMP morphing structures and robots.more » « less
