skip to main content

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


  • NSF Public Access
  • Search Results
  • Quantitative evaluation of the effect of dispersion techniques on the mechanical properties of polyhedral oligomeric silsesquioxane ( POSS )–epoxy nanocomposites
Title: Quantitative evaluation of the effect of dispersion techniques on the mechanical properties of polyhedral oligomeric silsesquioxane ( POSS )–epoxy nanocomposites

This experimental study investigates the effects of dispersion techniques on the mechanical properties of POSS‐epoxy nanocomposites. The POSS is dispersed into the epoxy resin by stoichiometrically varying the weight fraction from 0.5 to 10 wt% and materials are prepared using three different dispersion techniques. Various mechanical properties are reported as functions of processing parameters and weight fractions. It is found that the nanocomposites with highly dispersed POSS show higher modulus and toughness values. For example, nanocomposites prepared by ultrasonication show increases in elastic and flexural modulus values by average amounts of 23% and 15%, respectively. Also, it is found that fracture toughness values increased for all three processing techniques, with the highest increase by an average of 50% at 8 wt% of POSS inclusion for nanocomposites prepared by ultrasonication. TEM images of the nanocomposites demonstrate that the properties are also affected by the formation of soft domains at higher loading levels of POSS. Further evidence on the soft domains is found in the variations ofTg. FTIR spectroscopy shows evidence of SiOSi stretching, again suggesting the formation of compliant domains due to POSS‐POSS agglomeration. POLYM. COMPOS., 39:E2445–E2453, 2018. © 2018 Society of Plastics Engineers

  more » « less
PAR ID:
10050910
Author(s) / Creator(s):
 ;  
Publisher / Repository:
Wiley Blackwell (John Wiley & Sons)
Date Published:
Journal Name:
Polymer Composites
Volume:
39
Issue:
S4
ISSN:
0272-8397
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; ( , Current Applied Polymer Science)
    null (Ed.)
    Background:: Sandwich structures are progressively being used in various engineering applications due to the superior bending-stiffness-to-weight ratio of these structures. We adapted a novel technique to incorporate carbon nanotubes (CNTs) and polyhedral oligomeric silsesquioxanes (POSS) into a sandwich composite structure utilizing a sonochemical and high temperature vacuum assisted resin transfer molding technique. Objective:: The objective of this work was to create a sandwich composite structure comprised of a nanophased foam core and reinforced nanophased face sheets, and to examine the thermal and mechanical properties of the structure. To prepare sandwich structure, POSS nanoparticles were sonochemically attached to CNTs and dispersed in a high temperature resin system to make the face sheet materials and also coated on expandable thermoplastic microspheres for the fabrication of foam core materials. Method:: The nanophased foam core was fabricated with POSS infused thermoplastic microspheres (Expancel) using a Tetrahedron MTP-14 programmable compression molder. The reinforced nanophased face sheet were fabricated by infusing POSS coated CNT in epoxy resin and then curing into a compression stainless steel mold. Result:: Thermal analysis of POSS-infused thermoplastic microspheres foam (TMF) showed an increase in thermal stability in both nitrogen and oxygen atmospheres, 19% increase in thermal residue were observed for 4 wt% GI-POSS TMF compared to neat TMF. Quasi-static compression results indicated significant increases (73%) in compressive modulus, and an increase (5%) in compressive strength for the 1 wt% EC-POSS/CNTs resin system. The nanophased sandwich structure constructed from the above resin system and the foam core system displayed an increase (9%) in modulus over the neat sandwich structure. Conclusion:: The incorporation of POSS-nanofillier in the foam core and POSS-coated nanotubes in the face sheet significantly improved the thermal and mechanical properties of sandwich structure. Furthermore, the sandwich structure that was constructed from nanophased resin system showed an increase in modulus, with buckling in the foam core but no visible cracking. 
    more » « less
  2. ; ; ( , Chinese Journal of Polymer Science)
    Carbon nanotube (CNT)/epoxy nanocomposites have a great potential of possessing many advanced properties. However, the homogenization of CNT dispersion is still a great challenge in the research field of nanocomposites. This study applied a novel dispersion agent, carboxymethyl cellulose (CMC), to functionalize CNTs and improve CNT dispersion in epoxy. The effectiveness of the CMC functionalization was compared with mechanical mixing and a commonly used surfactant, sodium dodecylbenzene sulfonate (NaDDBS), regarding dispersion, mechanical and corrosion properties of CNT/epoxy nanocomposites with three different CNT concentrations (0.1%, 0.3% and 0.5%). The experimental results of Raman spectroscopy, particle size analysis and transmission electron microscopy showed that CMC functionalized CNTs reduced CNT cluster sizes more efficiently than NaDDBS functionalized and mechanically mixed CNTs, indicating a better CNT dispersion. The peak particle size of CMC functionalized CNTs reduced as much as 54% (0.1% CNT concentration) and 16% (0.3% CNT concentration), compared to mechanical mixed and NaDDBS functionalized CNTs. Because of the better dispersion, it was found by compressive tests that CNT/epoxy nanocomposites with CMC functionalization resulted in 189% and 66% higher compressive strength, 224% and 50% higher modulus of elasticity than those with mechanical mixing and NaDDBS functionalization respectively (0.1% CNT cencentration). In addition, electrochemical corrosion tests also showed that CNT/epoxy nanocomposites with CMC functionalization achieved lowest corrosion rate (0.214 mpy), the highest corrosion resistance (201.031 Ω·cm2), and the lowest porosity density (0.011%). 
    more » « less
  3. ; ; ; ; ; ; ; ; ( , Progress in Organic Coatings)
    This study explored the enhancement potential of MXene, a novel two-dimensional material, in epoxy-based nanocomposites; which comprehensively examined the influence of MXene on epoxy's viscosity, void formation, aging resistance, mechanical properties, and anti-wear properties. MXene nanofillers, labeled as 25C and 80C, fabricated via different acid-etching methods, were incorporated into epoxy resin at varying weight percentages (0.1-2.0 wt.%). Observations revealed that for both varieties of MXene, inclusion of 1.0 wt.% MXene led to the mitigation of void content, whereas the incorporation of 2.0 wt.% MXene yielded maximal enhancements in both tensile strength and abrasion resistance. Additionally, the integration of 1.0 and 2.0 wt.% MXene displayed superior aging resistance, with around 80% reduction in free radical formation compared to the unmodified epoxy, while maintaining its excellent mechanical properties after QUV exposure. Therefore, both MXene types significantly enhanced the performance of epoxy composites, with the 80C-MXene displaying marginally superior enhancement due to its smaller particle size and higher purity, as identified by SEM and TEM images. 
    more » « less
  4. ; ; ; ; ( , Polymer Composites)
    Abstract Highlights

    Nanodiamond with a spherical structure had better dispersion characteristics.

    Cylindrical carbon nanotube and planar graphene tended to agglomerate.

    Nanodiamond reinforced nanocomposites had better abrasion resistance.

    Carbon nanotube reinforced nanocomposites had better tensile properties.

    Carboxymethyl cellulose functionalization was valid for all three nanofillers.

     
    more » « less
  5. ; ; ; ; ; ; ; ( , Journal of Applied Polymer Science)
    ABSTRACT

    An electric field‐assistedin situdispersion of multiwall carbon nanotubes (MWCNTs) in polymer nanocomposites, fabricated through stereolithography three‐dimensional (3D) printing technique, was demonstrated. The introduction of MWCNTs increased the elasticity modulus of the polymer resin by 77%. Furthermore, the use of an electric field forin situMWCNT dispersion helped improving the average elongation at break of the samples with MWCNTs by 32%. The electric field also increased the ultimate tensile strength of the MWCNT reinforced nanocomposites by 42%. An increase of over 20% in the ultimate tensile strength ofin situdispersed MWCNT nanocomposites over the pure polymer material was observed. Finally, it was demonstrated that the magnitude and direction of the electrical conductivity of MWCNT nanocomposites can be engineered through the application ofin situelectric fields during 3D printing. An increase of 50% in the electrical conductivity was observed when MWCNTs were introduced, while the application of the electric field further improved the electrical conductivity by 26%. The presented results demonstrated the feasibility of tuning both electrical and mechanical properties of MWCNT reinforced polymer nanocomposites usingin situelectrical field‐assisted 3D printing. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci.2019,136, 47600.

     
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email