skip to main content


Title: Chemical and Morphological Control of Interfacial Self‐Doping for Efficient Organic Electronics
Abstract

Solution‐based processing of materials for electrical doping of organic semiconductor interfaces is attractive for boosting the efficiency of organic electronic devices with multilayer structures. To simplify this process, self‐doping perylene diimide (PDI)‐based ionene polymers are synthesized, in which the semiconductor PDI components are embedded together with electrolyte dopants in the polymer backbone. Functionality contained within the PDI monomers suppresses their aggregation, affording self‐doping interlayers with controllable thickness when processed from solution into organic photovoltaic devices (OPVs). Optimal results for interfacial self‐doping lead to increased power conversion efficiencies (PCEs) of the fullerene‐based OPVs, from 2.62% to 10.64%, and of the nonfullerene‐based OPVs, from 3.34% to 10.59%. These PDI–ionene interlayers enable chemical and morphological control of interfacial doping and conductivity, demonstrating that the conductive channels are crucial for charge transport in doped organic semiconductor films. Using these novel interlayers with efficient doping and high conductivity, both fullerene‐ and nonfullerene‐based OPVs are achieved with PCEs exceeding 9% over interlayer thicknesses ranging from ≈3 to 40 nm.

 
more » « less
NSF-PAR ID:
10054164
Author(s) / Creator(s):
 ;  ;  ;  ;  ;  ;  
Publisher / Repository:
Wiley Blackwell (John Wiley & Sons)
Date Published:
Journal Name:
Advanced Materials
Volume:
30
Issue:
15
ISSN:
0935-9648
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Abstract

    A new and highly efficient cathode interlayer material for organic photovoltaics (OPVs) was produced by integrating C60fullerene monomers into ionene polymers. The power of these novel “C60‐ionenes” for interface modification enables the use of numerous high work‐function metals (e.g., silver, copper, and gold) as the cathode in efficient OPV devices. C60‐ionene boosted power conversion efficiencies (PCEs) of solar cells, fabricated with silver cathodes, from 2.79 % to 10.51 % for devices with a fullerene acceptor in the active layer, and from 3.89 % to 11.04 % for devices with a non‐fullerene acceptor in the active layer, demonstrating the versatility of this interfacial layer. The introduction of fullerene moieties dramatically improved the conductivity of ionene polymers, affording devices with high efficiency by reducing charge accumulation at the cathode/active layer interface. The power of C60‐ionene to improve electron injection and extraction between metal electrodes and organic semiconductors highlights its promise to overcome energy barriers at the hard‐soft materials interface to the benefit of organic electronics.

     
    more » « less
  2. Abstract

    A new and highly efficient cathode interlayer material for organic photovoltaics (OPVs) was produced by integrating C60fullerene monomers into ionene polymers. The power of these novel “C60‐ionenes” for interface modification enables the use of numerous high work‐function metals (e.g., silver, copper, and gold) as the cathode in efficient OPV devices. C60‐ionene boosted power conversion efficiencies (PCEs) of solar cells, fabricated with silver cathodes, from 2.79 % to 10.51 % for devices with a fullerene acceptor in the active layer, and from 3.89 % to 11.04 % for devices with a non‐fullerene acceptor in the active layer, demonstrating the versatility of this interfacial layer. The introduction of fullerene moieties dramatically improved the conductivity of ionene polymers, affording devices with high efficiency by reducing charge accumulation at the cathode/active layer interface. The power of C60‐ionene to improve electron injection and extraction between metal electrodes and organic semiconductors highlights its promise to overcome energy barriers at the hard‐soft materials interface to the benefit of organic electronics.

     
    more » « less
  3. Abstract

    Polymer zwitterions were synthesized by nucleophilic ring‐opening of 3,3′‐(but‐2‐ene‐1,4‐diyl)bis(1,2‐oxathiolane 2,2‐dioxide) (a bis‐sultone) with functional perylene diimide (PDI) or fullerene monomers. Integration of these polymers into solar cell devices as cathode interlayers boosted efficiencies of fullerene‐based organic photovoltaics (OPVs) from 2.75 % to 10.74 %, and of non‐fullerene‐based OPVs from 4.25 % to 10.10 %, demonstrating the versatility of these interlayer materials in OPVs. The fullerene‐containing polymer zwitterion (C60‐PZ) showed a higher interfacial dipole (Δ) value and electron mobility than its PDI counterpart (PDI‐PZ), affording solar cells with high efficiency. The power ofPDI‐PZandC60‐PZto improve electron injection and extraction processes when positioned between metal electrodes and organic semiconductors highlights their promise to overcome energy barriers at the hard‐soft materials interface of organic electronics.

     
    more » « less
  4. Abstract

    Polymer zwitterions were synthesized by nucleophilic ring‐opening of 3,3′‐(but‐2‐ene‐1,4‐diyl)bis(1,2‐oxathiolane 2,2‐dioxide) (a bis‐sultone) with functional perylene diimide (PDI) or fullerene monomers. Integration of these polymers into solar cell devices as cathode interlayers boosted efficiencies of fullerene‐based organic photovoltaics (OPVs) from 2.75 % to 10.74 %, and of non‐fullerene‐based OPVs from 4.25 % to 10.10 %, demonstrating the versatility of these interlayer materials in OPVs. The fullerene‐containing polymer zwitterion (C60‐PZ) showed a higher interfacial dipole (Δ) value and electron mobility than its PDI counterpart (PDI‐PZ), affording solar cells with high efficiency. The power ofPDI‐PZandC60‐PZto improve electron injection and extraction processes when positioned between metal electrodes and organic semiconductors highlights their promise to overcome energy barriers at the hard‐soft materials interface of organic electronics.

     
    more » « less
  5. Abstract

    Until recently, solution‐processable organic photovoltaics (OPVs) mainly relied on fullerene derivatives as then‐type material, paired with ap‐type conjugated polymer. However, fullerene derivatives have disadvantages that limit OPV performance, thus fueling research of non‐fullerene acceptors (NFAs). Initially, NFAs showed poor performance due to difficulties in obtaining favorable blend morphologies. One example is our work with 2,6‐dialkylamino core‐substituted naphthalene diimides. Researchers then learned to control blend morphology by NFA molecular design. To limit miscibility with polymer while preventing excessive self‐aggregation, non‐planar, twisted or 3D structures were reported. An example of a 3D structure is our work with homoleptic zinc(II) complexes of azadipyrromethene. The most recent design is a planar A‐D‐A conjugated system where the D unit is rigid and has orthogonal side chains to control aggregation. These have propelled power conversion efficiencies (PCEs) to ∼14 %, surpassing fullerene‐based OPVs. These exciting new developments prompt further investigations of NFAs and provide a bright future for OPVs.

     
    more » « less