A major breakthrough in the field of organic photovoltaics (OPVs) was the development of the donor/acceptor heterojunction that aids in separating Coulombically bound excitons that are generated upon photoabsorption. Additionally, bound charge transfer (CT) states that result from the exchange of charge carriers across the donor/acceptor interface are believed to play an important role in charge generation. Though organic thin films are often disordered, enhancements to the local structural order at the donor/acceptor interface have recently been shown to greatly influence CT state energetics and the charge generation process. In this progress report, recent efforts to understand the role that donor/acceptor morphology plays in the behavior of CT states and the resulting implications on OPV function are presented. It is aimed to provide a survey of different experimental approaches and to present a balanced examination of current interpretations of key results, and to offer best practices for the fabrication and study of morphologically tunable donor/acceptor CT states.
Charge‐transfer materials based on the self‐assembly of aromatic donor–acceptor complexes enable a modular organic‐synthetic approach to develop and fine‐tune electronic and optical properties, and thus these material systems stand to impact a wide range of technologies. Through laser‐induction of temperature gradients, in this study, user‐defined patterning of strongly dichroic and piezoelectric organic thin films composed of donor–acceptor columnar liquid crystals is shown. Fine, reversible control over isotropic versus anisotropic regions in thin films is demonstrated, enabling noncontact writing/rewriting of micropolarizers, bar codes, and charge‐transfer based devices.
more » « less- NSF-PAR ID:
- 10055538
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Advanced Materials
- Volume:
- 30
- Issue:
- 20
- ISSN:
- 0935-9648
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
Abstract -
more » « less
Abstract Organic photovoltaic cells possess desirable practical characteristics, such as the potential for low‐cost fabrication on flexible substrates, but they lag behind their inorganic counterparts in performance due in part to fundamental energy loss mechanisms, such as overcoming the charge transfer (CT) state binding energy when photogenerated charge is transferred across the donor/acceptor interface. However, recent work has suggested that crystalline interfaces can reduce this binding energy due to enhanced CT state delocalization. Solar cells based on rubrene and C60are investigated as an archetypal system because it allows the degree of crystallinity to be moldulated from a highly disordered to highly ordered system. Using a postdeposition annealing method to transform as‐deposited amorphous rubrene thin films into ones that are highly crystalline, it is shown that the CT state of a highly crystalline rubrene/C60heterojunction undergoes extreme delocalization parallel to the interface leading to a band‐like state that exhibits a linear Stark effect. This state parallels the direct charge formation of inorganic solar cells and reduces energetic losses by 220 meV compared with 12 other archetypal heterojunctions reported in the literature.
-
more » « less
Abstract The relation of phase morphology and solid‐state microstructure with organic photovoltaic (OPV) device performance has intensely been investigated over the last twenty years. While it has been established that a combination of donor:acceptor intermixing and presence of relatively phase‐pure donor and acceptor domains is needed to get an optimum compromise between charge generation and charge transport/charge extraction, a quantitative picture of how much intermixing is needed is still lacking. This is mainly due to the difficulty in quantitatively analyzing the intermixed phase, which generally is amorphous. Here, fast scanning calorimetry, which allows measurement of device‐relevant thin films (<200 nm thickness), is exploited to deduce the precise composition of the intermixed phase in bulk‐heterojunction structures. The power of fast scanning calorimetry is illustrated by considering two polymer:fullerene model systems. Somewhat surprisingly, it is found that a relatively small fraction (<15 wt%) of an acceptor in the intermixed amorphous phase leads to efficient charge generation. In contrast, charge transport can only be sustained in blends with a significant amount of the acceptor in the intermixed phase (in this case: ≈58 wt%). This example shows that fast scanning calorimetry is an important tool for establishing a complete compositional characterization of organic bulk heterojunctions. Hence, it will be critical in advancing quantitative morphology–function models that allow for the rational design of these devices, and in delivering insights in, for example, solar cell degradation mechanisms via phase separation, especially for more complex high‐performing systems such as nonfullerene acceptor:polymer bulk heterojunctions.
-
Molecular Origin of Strain‐Induced Chain Alignment in PDPP‐Based Semiconducting Polymeric Thin Filmsmore » « less
Abstract Donor–acceptor (D–A) type semiconducting polymers have shown great potential for the application of deformable and stretchable electronics in recent decades. However, due to their heterogeneous structure with rigid backbones and long solubilizing side chains, the fundamental understanding of their molecular picture upon mechanical deformation still lacks investigation. Here, the molecular orientation of diketopyrrolopyrrole (DPP)‐based D–A polymer thin films is probed under tensile deformation via both experimental measurements and molecular modeling. The detailed morphological analysis demonstrates highly aligned polymer crystallites upon deformation, while the degree of backbone alignment is limited within the crystalline domain. Besides, the aromatic ring on polymer backbones rotates parallel to the strain direction despite the relatively low overall chain anisotropy. The effect of side‐chain length on the DPP chain alignment is observed to be less noticeable. These observations are distinct from traditional linear‐chain semicrystalline polymers like polyethylene due to distinct characteristics of backbone/side‐chain combination and the crystallographic characteristics in DPP polymers. Furthermore, a stable and isotropic charge carrier mobility is obtained from fabricated organic field‐effect transistors. This study deconvolutes the alignment of different components within the thin‐film microstructure and highlights that crystallite rotation and chain slippage are the primary deformation mechanisms for semiconducting polymers.
-
more » « less
Abstract The combination of inorganic and organic semiconductors in a heterojunction is considered a promising approach to overcome limitations of each individual material class. However, to date only few examples of improved (opto‐)electronic functionality have been realized with such hybrid heterojunctions. The key to unraveling the full potential offered by inorganic/organic semiconductor heterojunctions is the ability to deliberately control the interfacial electronic energy levels. Here, a universal approach to adjust the offset between the energy levels at inorganic/organic semiconductor interfaces is demonstrated: the interlayer method. A monolayer‐thick interlayer comprising strong electron donor or acceptor molecules is inserted between the two semiconductors and alters the energy level alignment due to charge transfer with the inorganic semiconductor. The general applicability of this method by tuning the energy levels of hydrogenated silicon relative to those of vacuum‐processed films of a molecular semiconductor as well as solution‐processed films of a polymer semiconductor is exemplified, and is shown that the energy level offset can be changed by up to 1.8 eV. This approach can be used to adjust the energy levels at the junction of a desired material pair at will, and thus paves the way for novel functionalities of optoelectronic devices.
