Desalination by membrane distillation (MD) using low‐grade or waste heat provides a potential route for sustainable water supply. Nonwetting, porous membranes that provide a selective pathway for water vapor over nonvolatile salt are at the core of MD desalination. Conventional water‐repelling MD membranes (i.e., hydrophobic and superhydrophobic membranes) fail to ensure long‐term desalination performance due to pore wetting and surface fouling. To address these challenges, a defect‐free carbon nanotube forest (CNTF) is engineered in situ on a porous electrospun silica fiber substrate. The engineered CNTF forms an ultrarough and porous interface structure, allowing outstanding wetting resistance against water in air and oil underwater. As a result of this antiwetting property, the composite CNTF membrane displays a stable water vapor flux and a near complete salt rejection (>99.9%) in the desalination of highly saline water containing low surface tension contaminants. The antimicrobial property of the composite CNTF membrane imparted by the unique forest‐like architecture and the oxidative effect of carbon nanotubes (CNTs) are further demonstrated. The results exemplify an effective strategy for engineering CNT architecture to elucidate the structure–property–performance relationship of the nanocomposite membranes and to guide the design of robust thermal desalination membranes.
- Award ID(s):
- 1705048
- NSF-PAR ID:
- 10058665
- Date Published:
- Journal Name:
- Energy & Environmental Science
- Volume:
- 11
- Issue:
- 5
- ISSN:
- 1754-5692
- Page Range / eLocation ID:
- 1177 to 1196
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
Abstract -
Solar-thermal desalination (STD) is a potentially low-cost, sustainable approach for providing high-quality fresh water in the absence of water and energy infrastructures. Despite recent efforts to advance STD by improving heat-absorbing materials and system designs, the best strategies for maximizing STD performance remain uncertain. To address this problem, we identify three major steps in distillation-based STD: (i) light-to-heat energy conversion, (ii) thermal vapor generation, and (iii) conversion of vapor to water via condensation. Using specific water productivity as a quantitative metric for energy efficiency, we show that efficient recovery of the latent heat of condensation is critical for STD performance enhancement, because solar vapor generation has already been pushed toward its performance limit. We also demonstrate that STD cannot compete with photovoltaic reverse osmosis desalination in energy efficiency. We conclude by emphasizing the importance of factors other than energy efficiency, including cost, ease of maintenance, and applicability to hypersaline waters.more » « less
-
Evaporation-based solar thermal distillation is a promising approach for purifying high-salinity water, but the liquid-vapor phase transition inherent to this process makes it intrinsically energy intensive. Here we show that the exchange of heat between the distilled and input water can fulfill a resonance condition, resulting in dramatic increases in fresh water production. Large gains (500%) in distilled water are accomplished by coupling nanophotonics-enabled solar membrane distillation with dynamic thermal recovery, achieved by controlling input flow rates as a function of incident light intensity. The resonance condition, achieved for the circulating heat flux between the distillate and feed, allows the system to behave in an entirely new way, as a desalination oscillator. The resonant oscillator concept introduced here is universal and can be applied to other systems such as thermal energy storage or solar-powered chemical reactors.more » « less
-
Polyamide reverse osmosis (PA-RO) membranes achieve remarkably high water permeability and salt rejection, making them a key technology for addressing water shortages through processes including seawater desalination and wastewater reuse. However, current state-of-the-art membranes suffer from challenges related to inadequate selectivity, fouling, and a poor ability of existing models to predict performance. In this Perspective, we assert that a molecular understanding of the mechanisms that govern selectivity and transport of PA-RO and other polymer membranes is crucial to both guide future membrane development efforts and improve the predictive capability of transport models. We summarize the current understanding of ion, water, and polymer interactions in PA-RO membranes, drawing insights from nanofiltration and ion exchange membranes. Building on this knowledge, we explore how these interactions impact the transport properties of membranes, highlighting assumptions of transport models that warrant further investigation to improve predictive capabilities and elucidate underlying transport mechanisms. We then underscore recent advances in in situ characterization techniques that allow for direct measurements of previously difficult-to-obtain information on hydrated polymer membrane properties, hydrated ion properties, and ion–water–membrane interactions as well as powerful computational and electrochemical methods that facilitate systematic studies of transport phenomena.more » « less
-
more » « less
Abstract Understanding the thermodynamics associated with ion mixing and separation processes is important in order to meet the rising demands for clean energy and water production. Several electrochemical-based technologies such as capacitive deionization and capacitive mixing (CapMix) are capable of achieving desalination and energy production through ion mixing and separation processes, yet experimental investigations suggest energy conversion occurs with low second law (thermodynamic) efficiency. Here, we explore the maximum attainable efficiency for different CapMix cycles to investigate the impact cycle operation has on energy extraction. All investigated cycles are analogous to well documented heat engine cycles. In order to analyze CapMix cycles, we develop a physics-based model of the electric double layer based on the Gouy-Chapman-Stern theory. Evaluating CapMix cycles for energy generation revealed that cycles where ion mixing occurs at constant concentration and switching occurs at constant charge (a cycle analogous to the Stirling engine) attained the highest overall first law (electrical energy) efficiency (39%). This first law efficiency is nearly 300% greater than the first law efficiency of the Otto, Diesel, Brayton, and Atkinson analog cycles where ion mixing occurs while maintaining a constant number of ions. Additionally, the maximum first law efficiency was 89% with a maximum work output of 0.5 kWh per m3 of solution mixed (V = 1.0V) using this same Stirling cycle. Here the salinity gradient was CH = 600 mM and CL = 1 mM (ΔGmix = 0.56 kWh/m3). The effect of voltage was also examined at CH = 600 mM (seawater) and CL = 20 mM (river water). CapMix cycles operated at lower voltage (V < 1.0V), resulted in the Otto cycle yielding the highest first law efficiency of approximately 25% (compared to under 20% for the Stirling cycle); however, this was at the expense of a reduction (50x) in net electrical energy extracted from the same mixing process (0.01 kWh per m3).
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1039/C8EE00291F
