Controlled aggregation of nanoparticles into superlattices is a grand challenge in material science, where ligand based self‐assembly is the dominant route. Here, the self‐assembly of gold nanoparticles (AuNPs) that are crosslinked by water soluble oligo‐(ethylene glycol)‐dithiol (oEG‐dithiol) is reported and their 3D structure by small angle X‐ray scattering is determined. Surprisingly, a narrow region is found in the parameter space of dithiol linker‐length and nanoparticle size for which the crosslinked networks form short‐ranged FCC crystals. Using geometrical considerations and numerical simulations, the stability of the formed lattices is evaluated as a function of dithiol length and the number of connected nearest‐neighbors, and a phase diagram of superlattice formation is provided. Identifying the narrow parameter space that allows crystallization facilitates focused exploration of linker chemical composition and medium conditions such as thermal annealing, pH, and added solutes that may lead to superior and more robust crystals.
Acoustic waves are increasingly used to concentrate, separate, and pattern nanoparticles in liquids, but the extent to which nanoparticles of different size and composition can be focused is not well‐defined. This article describes a simple analytical model for predicting the distribution of nanoparticles around the node of a 1D bulk acoustic standing wave over time as a function of pressure amplitude, acoustic contrast factor (i.e., nanoparticle and fluid composition), and size of the nanoparticles. Predictions from this model are systematically compared to results from experiments on gold nanoparticles of different sizes to determine the model's accuracy in estimating both the rate and the degree of nanoparticle focusing across a range of pressure amplitudes. The model is further used to predict the minimum particle size that can be focused for different nanoparticle and fluid compositions, and those predictions are tested with gold, silica, and polystyrene nanoparticles in water. A procedure combining UV‐light and photoacid is used to induce the aggregation of nanoparticles to illustrate the effect of nanoparticle aggregation on the observed degree of acoustic focusing. Overall, these findings clarify the extent to which acoustic resonating devices can be used to manipulate, pattern, and enrich nanoparticles suspended in liquids.
more » « less- NSF-PAR ID:
- 10064866
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Particle & Particle Systems Characterization
- Volume:
- 35
- Issue:
- 7
- ISSN:
- 0934-0866
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
Abstract -
Molecular-level understanding of nanomaterial interactions with bacterial cell surfaces can facilitate design of antimicrobial and antifouling surfaces and inform assessment of potential consequences of nanomaterial release into the environment. Here, we investigate the interaction of cationic nanoparticles with the main surface components of Gram-positive bacteria: peptidoglycan and teichoic acids. We employed intact cells and isolated cell walls from wild type Bacillus subtilis and two mutant strains differing in wall teichoic acid composition to investigate interaction with gold nanoparticles functionalized with cationic, branched polyethylenimine. We quantified nanoparticle association with intact cells by flow cytometry and determined sites of interaction by solid-state 31 P- and 13 C-NMR spectroscopy. We find that wall teichoic acid structure and composition were important determinants for the extent of interaction with cationic gold nanoparticles. The nanoparticles interacted more with wall teichoic acids from the wild type and mutant lacking glucose in its wall teichoic acids than those from the mutant having wall teichoic acids lacking alanine and exhibiting more restricted molecular motion. Our experimental evidence supports the interpretation that electrostatic forces contributed to nanoparticle–cell interactions and that the accessibility of negatively charged moieties in teichoic acid chains influences the degree of interaction. The approaches employed in this study can be applied to engineered nanomaterials differing in core composition, shape, or surface functional groups as well as to other types of bacteria to elucidate the influence of nanoparticle and cell surface properties on interactions with Gram-positive bacteria.more » « less
-
Asphaltenes are the heaviest and most polarizable fractions of crude oil. During the oil production process, changes in the temperature, pressure, and oil composition can destabilize asphaltenes. This destabilization leads to asphaltene aggregation and deposition, which can cause major clogging problems in both the wellbore and near-wellbore regions as well as the production facilities. In this study, we developed and investigated the application of acrylic acid and 2-acrylanmido-2-methylpropanesulfonic acid (AA–AMPS)-functionalized magnetic nanoparticles as a surface coating in inhibiting asphaltene deposition. The use of the porous media microfluidic platform allows for efficient evaluation of the effectiveness of the nanoparticle coating in mitigating asphaltene deposition in various crude oils. We demonstrated that the nanoparticle coating is effective in inhibiting asphaltene deposition, showing up to a 75% improvement in permeability change. The study also explores the dynamics of asphaltene aggregation and deposition in different crude oils. We identified factors such as asphaltene aggregate size as well as the physical and chemical characteristics of the aggregates that can determine the effectiveness of different mitigation methods.more » « less
-
more » « less
Abstract Boiling is a high-performance heat dissipation process that is central to electronics cooling and power generation. The past decades have witnessed significantly improved and better-controlled boiling heat transfer using structured surfaces, whereas the physical mechanisms that dominate structure-enhanced boiling remain contested. Experimental characterization of boiling has been challenging due to the high dimensionality, stochasticity, and dynamicity of the boiling process. To tackle these issues, this paper presents a coupled multimodal sensing and data fusion platform to characterize boiling states and heat fluxes and identify the key transport parameters in different boiling stages. Pool boiling tests of water on multi-tier copper structures are performed under both steady-state and transient heat loads, during which multimodal, multidimensional signals are recorded, including temperature profiles, optical imaging, and acoustic signals via contact acoustic emission (AE) sensors, hydrophones immersed in the liquid pool, and condenser microphones outside the boiling chamber. The physics-based analysis is focused on i) extracting dynamic characteristics of boiling from time lags between acoustic-optical-thermal signals, ii) analyzing energy balance between thermal diffusion, bubble growth, and acoustic dissipation, and iii) decoupling the response signals for different physical processes, e.g., low-to-midfrequency range AE induced by thermal expansion of liquids and bubble ebullition. Separate multimodal sensing tests, namely a single-phase liquid test and a single-bubble-dynamics test, are performed to reinforce the analysis, which confirms an AE peak of 1.5 kHz corresponding to bubble ebullition. The data-driven analysis is focused on enabling the early fusion of acoustic and optical signals for improved boiling state and flux predictions. Unlike single-modality analysis or commonly-used late fusion algorithms that concatenate processed signals in dense layers, the current work performs the fusion process in the deep feature domain using a multi-layer perceptron regression model. This early fusion algorithm is shown to lead to more accurate and robust predictions. The coupled multimodal sensing and data fusion platform is promising to enable reliable thermal monitoring and advance the understanding of dominant transport mechanisms during boiling.
-
more » « less
Abstract Magnetic nanoparticle chains offer the anisotropic magnetic properties that are often desirable for micro‐ and nanoscale systems; however, to date, large‐scale fabrication of these nanochains is limited by the need for an external magnetic field during the synthesis. In this work, the unique self‐assembly of nanoparticles into chains as a result of their intrinsic dipolar interactions only is examined. In particular, it is shown that in a high concentration reaction regime, the dipole–dipole coupling between two neighboring magnetic iron cobalt (FeCo) nanocubes, was significantly strengthened due to small separation between particles and their high magnetic moments. This dipole–dipole interaction enables the independent alignment and synthesis of magnetic FeCo nanochains without the assistance of any templates, surfactants, or even external magnetic field. Furthermore, the precursor concentration ([M] = 0.016, 0.021, 0.032, 0.048, 0.064, and 0.096
m ) that dictates the degree of dipole interaction is examined—a property dependent on particle size and inter‐particle distance. By varying the spinner speed, it is demonstrated that the balance between magnetic dipole coupling and fluid dynamics can be used to understand the self‐assembly process and control the final structural topology from that of dimers to linear chains (with aspect ratio >10:1) and even to branched networks. Simulations unveil the magnetic and fluid force landscapes that determine the individual nanoparticle interactions and provide a general insight into predicting the resulting nanochain morphology. This work uncovers the enormous potential of an intrinsic magnetic dipole‐induced assembly, which is expected to open new doors for efficient fabrication of 1D magnetic materials, and the potential for more complex assemblies with further studies.
