skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: APAM: Antagonistic Pneumatic Artificial Muscle
We present a pneumatic actuator capable of changing length by 1000%, applying both pushing and pulling forces, and independently modulating its length and stiffness. These characteristics are enabled by individually addressable internal and external chambers that work antagonistically against one another. The high deformation with low hysteresis is achieved by wrinkling of thin materials that are assumed to be inextensible but flexible, as opposed to stretchable. A model for the actuator is presented and validated with experimental results, showing capabilities of high strain, pushing and pulling, and independent control of length and stiffness. These charac- teristics are motivated by the application of a compliant truss robot. Accordingly, we show a simple grounded tetrahedron with three actuator elements and three static elements. We demonstrate motion of the tetrahedron apex against external loads and the ability of the structure to vary its stiffness. The actuator offers a unique set of characteristics that could increase the capabilities of soft robotic devices.  more » « less
Award ID(s):
1637446
PAR ID:
10066116
Author(s) / Creator(s):
; ;
Date Published:
Journal Name:
IEEE International Conference on Robotics and Automation
ISSN:
1049-3492
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; ; ; (, Advanced Intelligent Systems)
    Skins with asymmetric kirigami scales and soft spikes are integrated to the surface of a base self‐burrowing robot, which consists of a soft one‐segment extending actuator. Friction anisotropy is observed at the interfaces between the burrowing robots and different granular materials. Its effects on the pulling resistance and burrowing characteristics are studied. The results demonstrate that the development of friction and friction anisotropy is affected by the characteristics of the granular material, the asymmetric skins, and the relative size of the asymmetric features to the granular particles. Robots with scales or spikes aligned along the upward direction burrow faster than those aligned against the upward direction, especially in relatively coarser granular materials. Particle image velocimetry analysis on the particle displacement fields around the actuator reveals the complexity of dry granular material interactions with soft robots, implying that aligned scales or spikes can impact the distribution of friction preferentially, opening up many possibilities for thoughtful material and geometry‐based manipulation of friction in the design and optimization of future soft burrowing robots for more versatile locomotion capabilities. 
    more » « less
  2. ; ; ; ; ; ; ; (, Light: Science & Applications)
    Abstract Optomechanics arises from the photon momentum and its exchange with low-dimensional objects. It is well known that optical radiation exerts pressure on objects, pushing them along the light path. However, optical pulling of an object against the light path is still a counter-intuitive phenomenon. Herein, we present a general concept of optical pulling—opto-thermoelectric pulling (OTEP)—where the optical heating of a light-absorbing particle using a simple plane wave can pull the particle itself against the light path. This irradiation orientation-directed pulling force imparts self-restoring behaviour to the particles, and three-dimensional (3D) trapping of single particles is achieved at an extremely low optical intensity of 10−2 mW μm−2. Moreover, the OTEP force can overcome the short trapping range of conventional optical tweezers and optically drive the particle flow up to a macroscopic distance. The concept of self-induced opto-thermomechanical coupling is paving the way towards freeform optofluidic technology and lab-on-a-chip devices. 
    more » « less
  3. ; (, Biomimetic and Biohybrid Systems. Living Machines 2023.)
    Meder, F.; Hunt, A.; Margheri, L.; Mura, A.; Mazzolai, B. (Ed.)
    A challenge in robotics is to control interactions with the environment by modulating the stiffness of a manipulator’s joints. Smart servos are controlled with proportional feedback gain that is analogous to torsional stiffness of an animal’s joint. In animals, antagonistic muscle groups can be temporarily coactivated to stiffen the joint to provide greater opposition to external forces. However, the joint properties for which coactivation increases the stiffness of the joint remain unknown. In this study, we explore possible mechanisms by building a mathematical model of the stick insect tibia actuated by two muscles, the extensor and flexor tibiae. Muscle geometry, passive properties, and active properties are extracted from the literature. Joint stiffness is calculated by tonically activating the antagonists, perturbing the joint from its equilibrium angle, and calculating the restoring moment generated by the muscles. No reflexes are modeled. We estimate how joint stiffness depends on parallel elastic element stiffness, the shape of the muscle activation curve, and properties of the force-length curve. We find that co-contracting antagonist muscles only stiffens the joint when the peak of the force-length curve occurs at a muscle length longer than that when the joint is at equilibrium and the muscle force versus activation curve is concave-up. We discuss how this information could be applied to the control of a smart servo actuator in a robot leg. 
    more » « less
  4. ; (, Springer, Cham.)
    A challenge in robotics is to control interactions with the environment by modulating the stiffness of a manipulator’s joints. Smart servos are controlled with proportional feedback gain that is analogous to torsional stiffness of an animal’s joint. In animals, antagonistic muscle groups can be temporarily coactivated to stiffen the joint to provide greater opposition to external forces. However, the joint properties for which coactivation increases the stiffness of the joint remain unknown. In this study, we explore possible mechanisms by building a mathematical model of the stick insect tibia actuated by two muscles, the extensor and flexor tibiae. Muscle geometry, passive properties, and active properties are extracted from the literature. Joint stiffness is calculated by tonically activating the antagonists, perturbing the joint from its equilibrium angle, and calculating the restoring moment generated by the muscles. No reflexes are modeled. We estimate how joint stiffness depends on parallel elastic element stiffness, the shape of the muscle activation curve, and properties of the force-length curve. We find that co-contracting antagonist muscles only stiffens the joint when the peak of the force-length curve occurs at a muscle length longer than that when the joint is at equilibrium and the muscle force versus activation curve is concave-up. We discuss how this information could be applied to the control of a smart servo actuator in a robot leg. 
    more » « less
  5. (, Proc. ASME. SMASIS2019, ASME 2019 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, V001T06A004, September 9–11, 2019)
    A self-powered, and self-actuating lithium ion battery (LIB) has the potential to achieve large deformation while still maintaining actuation force. The energy storage capability allows for continual actuation without an external power source once charged. Reshaping the actuator requires a nonuniform distribution of charge and/or bending stiffness. Spatially varying the state of charge and bending stiffness along the length of a segmented unimorph configuration have the effect of improving the tailorability of the deformed actuator. In this paper, an analytical model is developed to predict the actuation properties of the segmented unimorph beam to determine its usefulness as an actuator. The model predicts the free deflection, blocked deflection, and blocked force at the tip as a function of spatially varying state of charge and bending stiffness. The main contribution of the paper is the development of blocked deflection over the length of the segmented unimorph, which has not yet been considered in the literature. The model is verified using experimental data and commercial finite element analysis. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email