This study analyzes high-resolution ship data collected in the Gulf of Mexico during the Lagrangian Submesoscale Experiment (LASER) from January to February 2016 to produce the first reported measurements of dissipative heating in the explicitly nonhurricane atmospheric surface layer. Although typically computed from theory as a function of wind speed cubed, the dissipative heating directly estimated via the turbulent kinetic energy (TKE) dissipation rate is also presented. The dissipative heating magnitude agreed with a previous study that estimated the dissipative heating in the hurricane boundary layer using in situ aircraft data. Our observations that the 10-m neutral drag coefficient parameterized using TKE dissipation rate approaches zero slope as wind increases suggests that TKE dissipation and dissipative heating are constrained to a physical limit. Both surface-layer stability and sea state were observed to be important conditions influencing dissipative heating, with the stability determined via TKE budget terms and the sea state determined via wave steepness and age using direct shipboard measurements. Momentum and enthalpy fluxes used in the TKE budget are determined using the eddy-correlation method. It is found that the TKE dissipation rate and the dissipative heating are largest in a nonneutral atmospheric surface layer with a sea surface comprising steep wind sea and slow swell waves at a given surface wind speed, whereas the ratio of dissipative heating to enthalpy fluxes is largest in near-neutral stability where the turbulent vertical velocities are near zero.more » « less
- NSF-PAR ID:
- Publisher / Repository:
- American Meteorological Society
- Date Published:
- Journal Name:
- Journal of the Atmospheric Sciences
- Page Range / eLocation ID:
- p. 689-706
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
Abstract Harvesting of crops in a weakly sloping Midwestern field during the Stable Atmospheric Variability and Transport (SAVANT) observation campaign allowed for a systematic investigation of the influence of surface roughness and static stability magnitude on the applicability of the Monin–Obukhov similarity (MOST) and hockey-stick transition (HOST) theories during stable boundary layer periods. We analyze momentum flux and turbulent velocity scale V TKE in three regimes, defined using the gradient Richardson number Ri and flux Richardson number Ri f as regime 1 (0 < Ri ≤ 0.1 and 0 < Ri f ≤ 0.1), regime 2 (0.1 < Ri ≤ 0.23 and 0.1 < Ri f ≤ 0.23), and regime 3 (both Ri and Ri f > 0.23). After harvest, in regime 1, stability varied from near-neutral to weakly stable and both MOST and HOST were applicable to estimate the momentum fluxes and V TKE as a function of mean wind speed. In regime 2, the momentum flux deviated from the MOST linear relationship as stability increased. In regimes 1 and 2, a HOST-defined threshold wind speed V s was identified beyond which V TKE increased linearly with wind speed at a rate of 0.26 for all observation heights. Below this threshold wind speed, V TKE behaved independent of mean wind and observation heights. Alternatively, for preharvest periods, MOST was applicable in regimes 1 and 2 for all heights and HOST was applicable with reduced V s for heights above the crop layer. Regime 3 during pre- and postharvest consisted of strongly stable periods and very weak to weak winds, where MOST was found to be invalid and V TKE remained low and independent of wind speed. The results suggest that roughness due to crops enhances the turbulence generation at lower wind speeds.more » « less
The distribution of turbulent kinetic energy (TKE) and its budget terms is estimated in simulated tropical cyclones (TCs) of various intensities. Each simulated TC is subject to storm motion, wind shear, and oceanic coupling. Different storm intensities are achieved through different ocean profiles in the model initialization. For each oceanic profile, the atmospheric simulations are performed with and without TKE advection. In all simulations, the TKE is maximized at low levels (i.e., below 1 km) and ∼0.5 km radially inward of the azimuthal‐mean radius of maximum wind speed at 1‐km height. As in a previous study, the axisymmetric TKE decreases with height in the eyewall, but more abruptly in simulations without TKE advection. The largest TKE budget terms are shear generation and dissipation, though variability in vertical turbulent transport and buoyancy production affect the change in the azimuthal‐mean TKE distribution. The general relationships between the TKE budget terms are consistent across different radii, regardless of storm intensity. In terms of the asymmetric distribution in the eyewall, TKE is maximized in the front‐left quadrant where the sea surface temperature (SST) is highest and is minimized in the rear‐right quadrant where the SST is the lowest. In the category‐5 simulation, the height of the TKE maximum varies significantly in the eyewall between quadrants and is between ∼400 m in the rear‐right quadrant and ∼1,000 m in the front‐left quadrant. When TKE advection is included in the simulations, the maximum eyewall TKE values are downwind compared to the simulations without TKE advection.
Bubble plume penetration depths have been identified as a key parameter linking subsurface turbulent kinetic energy (TKE) dissipation rates and whitecaps. From data collected in the Atlantic sector of the Southern Ocean, nominally 50°S 40°W, bubble plume penetration depths were estimated from Acoustic Doppler Current Profiler measurements of the acoustic backscatter anomaly. Bubble presence at depth was corroborated using independent measurements of optical scattering. Here, an effective wavelength, observations of significant wave height and atmospheric forcing were used to scale penetration depths of breaking waves under open ocean conditions. The parameterization was developed assuming a correlation between the observed penetration depth and an estimate of the TKE dissipation rate enhancement under breaking waves. The effective wavelength was defined from the effective phase speed based on a momentum and energy balance across the atmospheric wave boundary layer and was considered to be the largest actively wind‐coupled wave and representative of large‐scale breaking for wave ages ranging from 15 to 35 (i.e., 15 ≤ 〈
c p/ u*〉 ≤ 35). This yields a dimensional penetration depth parameterization in terms of inverse wave age and the length scales under consideration. The parameterization captures the bubble plume penetration depth with stronger forcing leading to deeper injections, reaching up to 9 m. Both length scales are effective at defining the depth of a wave‐affected layer in terms of bubble presence with the effective wavelength better collapsing the data under mixed conditions with deeper plumes associated to larger fractional whitecap coverage.
Abstract. This study analyzes turbulent energy fluxes in the Arctic atmospheric boundary layer (ABL) using measurements with a small uncrewed aircraft system (sUAS). Turbulent fluxes constitute a major part of the atmospheric energy budget and influence the surface heat balance by distributing energy vertically in the atmosphere. However, only few in situ measurements of the vertical profile of turbulent fluxes in the Arctic ABL exist. The study presents a method to derive turbulent heat fluxes from DataHawk2 sUAS turbulence measurements, based on the flux gradient method with a parameterization of the turbulent exchange coefficient. This parameterization is derived from high-resolution horizontal wind speed measurements in combination with formulations for the turbulent Prandtl number and anisotropy depending on stability. Measurements were taken during the MOSAiC (Multidisciplinary drifting Observatory for the Study of Arctic Climate) expedition in the Arctic sea ice during the melt season of 2020. For three example cases from this campaign, vertical profiles of turbulence parameters and turbulent heat fluxes are presented and compared to balloon-borne, radar, and near-surface measurements. The combination of all measurements draws a consistent picture of ABL conditions and demonstrates the unique potential of the presented method for studying turbulent exchange processes in the vertical ABL profile with sUAS measurements.more » « less
This study analyzes observations collected by multilevel towers to estimate turbulence parameters in the atmospheric surface layer of two landfalling tropical cyclones (TCs). The momentum flux, turbulent kinetic energy (TKE) and dissipation rate increase with the wind speed independent of surface types. However, the momentum flux and TKE are much larger over land than over the coastal ocean at a given wind speed range. The vertical eddy diffusivity is directly estimated using the momentum flux and strain rate, which more quickly increases with the wind speed over a rougher surface. Comparisons of the eddy diffusivity estimated using the direct flux method and that using the friction velocity and height show good agreement. On the other hand, the traditional TKE method overestimates the eddy diffusivity compared to the direct flux method. The scaling coefficients in the TKE method are derived for the two different surface types to better match with the vertical eddy diffusivity based on the direct flux method. Some guidance to improve vertical diffusion parameterizations for TC landfall forecasts in weather simulations are also provided.