skip to main content


Title: Transforming Ionene Polymers into Efficient Cathode Interlayers with Pendent Fullerenes
Abstract

A new and highly efficient cathode interlayer material for organic photovoltaics (OPVs) was produced by integrating C60fullerene monomers into ionene polymers. The power of these novel “C60‐ionenes” for interface modification enables the use of numerous high work‐function metals (e.g., silver, copper, and gold) as the cathode in efficient OPV devices. C60‐ionene boosted power conversion efficiencies (PCEs) of solar cells, fabricated with silver cathodes, from 2.79 % to 10.51 % for devices with a fullerene acceptor in the active layer, and from 3.89 % to 11.04 % for devices with a non‐fullerene acceptor in the active layer, demonstrating the versatility of this interfacial layer. The introduction of fullerene moieties dramatically improved the conductivity of ionene polymers, affording devices with high efficiency by reducing charge accumulation at the cathode/active layer interface. The power of C60‐ionene to improve electron injection and extraction between metal electrodes and organic semiconductors highlights its promise to overcome energy barriers at the hard‐soft materials interface to the benefit of organic electronics.

 
more » « less
NSF-PAR ID:
10088982
Author(s) / Creator(s):
 ;  ;  ;  ;  ;  
Publisher / Repository:
Wiley Blackwell (John Wiley & Sons)
Date Published:
Journal Name:
Angewandte Chemie International Edition
Volume:
58
Issue:
17
ISSN:
1433-7851
Page Range / eLocation ID:
p. 5677-5681
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Abstract

    A new and highly efficient cathode interlayer material for organic photovoltaics (OPVs) was produced by integrating C60fullerene monomers into ionene polymers. The power of these novel “C60‐ionenes” for interface modification enables the use of numerous high work‐function metals (e.g., silver, copper, and gold) as the cathode in efficient OPV devices. C60‐ionene boosted power conversion efficiencies (PCEs) of solar cells, fabricated with silver cathodes, from 2.79 % to 10.51 % for devices with a fullerene acceptor in the active layer, and from 3.89 % to 11.04 % for devices with a non‐fullerene acceptor in the active layer, demonstrating the versatility of this interfacial layer. The introduction of fullerene moieties dramatically improved the conductivity of ionene polymers, affording devices with high efficiency by reducing charge accumulation at the cathode/active layer interface. The power of C60‐ionene to improve electron injection and extraction between metal electrodes and organic semiconductors highlights its promise to overcome energy barriers at the hard‐soft materials interface to the benefit of organic electronics.

     
    more » « less
  2. Abstract

    Polymer zwitterions were synthesized by nucleophilic ring‐opening of 3,3′‐(but‐2‐ene‐1,4‐diyl)bis(1,2‐oxathiolane 2,2‐dioxide) (a bis‐sultone) with functional perylene diimide (PDI) or fullerene monomers. Integration of these polymers into solar cell devices as cathode interlayers boosted efficiencies of fullerene‐based organic photovoltaics (OPVs) from 2.75 % to 10.74 %, and of non‐fullerene‐based OPVs from 4.25 % to 10.10 %, demonstrating the versatility of these interlayer materials in OPVs. The fullerene‐containing polymer zwitterion (C60‐PZ) showed a higher interfacial dipole (Δ) value and electron mobility than its PDI counterpart (PDI‐PZ), affording solar cells with high efficiency. The power ofPDI‐PZandC60‐PZto improve electron injection and extraction processes when positioned between metal electrodes and organic semiconductors highlights their promise to overcome energy barriers at the hard‐soft materials interface of organic electronics.

     
    more » « less
  3. Abstract

    Polymer zwitterions were synthesized by nucleophilic ring‐opening of 3,3′‐(but‐2‐ene‐1,4‐diyl)bis(1,2‐oxathiolane 2,2‐dioxide) (a bis‐sultone) with functional perylene diimide (PDI) or fullerene monomers. Integration of these polymers into solar cell devices as cathode interlayers boosted efficiencies of fullerene‐based organic photovoltaics (OPVs) from 2.75 % to 10.74 %, and of non‐fullerene‐based OPVs from 4.25 % to 10.10 %, demonstrating the versatility of these interlayer materials in OPVs. The fullerene‐containing polymer zwitterion (C60‐PZ) showed a higher interfacial dipole (Δ) value and electron mobility than its PDI counterpart (PDI‐PZ), affording solar cells with high efficiency. The power ofPDI‐PZandC60‐PZto improve electron injection and extraction processes when positioned between metal electrodes and organic semiconductors highlights their promise to overcome energy barriers at the hard‐soft materials interface of organic electronics.

     
    more » « less
  4. Abstract

    Solution‐based processing of materials for electrical doping of organic semiconductor interfaces is attractive for boosting the efficiency of organic electronic devices with multilayer structures. To simplify this process, self‐doping perylene diimide (PDI)‐based ionene polymers are synthesized, in which the semiconductor PDI components are embedded together with electrolyte dopants in the polymer backbone. Functionality contained within the PDI monomers suppresses their aggregation, affording self‐doping interlayers with controllable thickness when processed from solution into organic photovoltaic devices (OPVs). Optimal results for interfacial self‐doping lead to increased power conversion efficiencies (PCEs) of the fullerene‐based OPVs, from 2.62% to 10.64%, and of the nonfullerene‐based OPVs, from 3.34% to 10.59%. These PDI–ionene interlayers enable chemical and morphological control of interfacial doping and conductivity, demonstrating that the conductive channels are crucial for charge transport in doped organic semiconductor films. Using these novel interlayers with efficient doping and high conductivity, both fullerene‐ and nonfullerene‐based OPVs are achieved with PCEs exceeding 9% over interlayer thicknesses ranging from ≈3 to 40 nm.

     
    more » « less
  5. Abstract

    In this report, a high‐performance all‐polymer organic photodetector that is sensitive to linearly polarized light throughout the visible spectrum is demonstrated. The active layer is a bulk heterojunction composed of an electron donor polymer PBnDT‐FTAZ and acceptor polymer P(NDI2OD‐T2) that have complementary spectral absorption resulting in efficient detection from 350 to 800 nm. The blend film exhibits good ductility with the ability to accommodate large strains of over 60% without fracture. This allows the film to undergo large uniaxial strain resulting in in‐plane alignment of both polymers making the film optically anisotropic and intrinsically polarization sensitive. The films are characterized by UV–vis spectroscopy and grazing incidence wide‐angle X‐ray scattering showing that both polymers have similar in‐plane backbone alignment and maintain packing order after being strained. The films are integrated into devices and characterized under linear polarized light. The strain‐oriented detectors have maximum photocurrent anisotropies of 1.4 under transverse polarized light while maintaining peak responsivities of 0.21 A W−1and a 3 dB cutoff frequency of ≈1 kHz. The demonstrated performance is comparable to the current state of the art all‐polymer photodetectors with the added capability of polarization sensitivity enabling new application opportunities.

     
    more » « less