skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


  • NSF Public Access
  • Search Results
  • Emerging investigator series: protein adsorption and transformation on catalytic and food-grade TiO 2 nanoparticles in the presence of dissolved organic carbon
Title: Emerging investigator series: protein adsorption and transformation on catalytic and food-grade TiO 2 nanoparticles in the presence of dissolved organic carbon
The inherent physicochemical properties of engineered nanomaterials (ENMs) are known to control the sorption of proteins, but knowledge on how the release of ENMs to the environment prior to protein exposure affects this reaction is limited. In this study, time-resolved, in situ infrared spectroscopy was used to investigate the sorption of a model protein, bovine serum albumin (BSA), onto two different types of titanium dioxide (TiO 2 ) ENMs (catalytic-grade P90 and food-grade E171) in the presence and absence of a simple dissolved organic carbon molecule, oxalate. Infrared spectroscopy results showed that oxalate adsorbed to P90 through chemisorption interactions, but it adsorbed to E171 through physisorption interactions due to the presence of inherent surface-bound phosphates. Secondary structure and two-dimensional correlation spectroscopy analyses showed that BSA interacted with and unfolded on the surface of P90, but not E171, presumably due to the repulsive forces from the negatively charged phosphates on E171. When oxalate was pre-adsorbed to either P90 or E171, the unfolding of BSA occurred, but along different pathways. This suggests both the “outer” surface chemistry ( e.g. , oxalate layers) and the mechanism by which this layer is bound to the ENM play a significant role in the adsorption of proteins. Collectively, the results indicate the exposure of ENMs to natural and engineered environments prior to biological uptake affects the resulting protein corona formation, and thus the transport and bioactivity of ENMs.  more » « less
Award ID(s):
1705770
PAR ID:
10106675
Author(s) / Creator(s):
;
Date Published:
Journal Name:
Environmental Science: Nano
Volume:
6
Issue:
6
ISSN:
2051-8153
Page Range / eLocation ID:
1688 to 1703
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; (, Chemical Science)
    Protein adsorption on surfaces greatly impacts many applications such as biomedical materials, anti-biofouling coatings, bio-separation membranes, biosensors, antibody protein drugs etc. For example, protein drug adsorption on the widely used lubricant silicone oil surface may induce protein aggregation and thus affect the protein drug efficacy. It is therefore important to investigate the molecular behavior of proteins at the silicone oil/solution interface. Such an interfacial study is challenging because the targeted interface is buried. By using sum frequency generation vibrational spectroscopy (SFG) with Hamiltonian local mode approximation method analysis, we studied protein adsorption at the silicone oil/protein solution interface in situ in real time, using bovine serum albumin (BSA) as a model. The results showed that the interface was mainly covered by BSA dimers. The deduced BSA dimer orientation on the silicone oil surface from the SFG study can be explained by the surface distribution of certain amino acids. To confirm the BSA dimer adsorption, we treated adsorbed BSA dimer molecules with dithiothreitol (DTT) to dissociate these dimers. SFG studies on adsorbed BSA after the DTT treatment indicated that the silicone oil surface is covered by BSA dimers and BSA monomers in an approximate 6 : 4 ratio. That is to say, about 25% of the adsorbed BSA dimers were converted to monomers after the DTT treatment. Extensive research has been reported in the literature to determine adsorbed protein dimer formation using ex situ experiments, e.g. , by washing off the adsorbed proteins from the surface then analyzing the washed-off proteins, which may induce substantial errors in the washing process. Dimerization is a crucial initial step for protein aggregation. This research developed a new methodology to investigate protein aggregation at a solid/liquid (or liquid/liquid) interface in situ in real time using BSA dimer as an example, which will greatly impact many research fields and applications involving interfacial biological molecules. 
    more » « less
  2. ; (, ACS Applied Bio Materials)
    Protein−nanoparticle (NP) complexes are nanomaterials that have numerous potential uses ranging from biosensing to biomedical applications such as drug delivery and nanomedicine. Despite their extensive use quantifying the number of bound proteins per NP remains a challenging characterization step that is crucial for further developments of the conjugate, particularly for metal NPs that often interfere with standard protein quantification techniques. In this work, we present a method for quantifying the number of proteins bound to pegylated thiol-capped gold nanoparticles (AuNPs) using an infrared (IR) spectrometer, a readily available instrument. This method takes advantage of the strong IR bands present in proteins and the capping ligands to quantify protein−NP ratios and circumvents the need to degrade the NPs prior to analysis. We show that this method is generalizable where calibration curves made using inexpensive and commercially available proteins such as bovine serum albumin (BSA) can be used to quantify protein−NP ratios for proteins of different sizes and structures. 
    more » « less
  3. ; ; ; ; ; ; ; ; ; ; et al (, Processes)
    Slag and Al/Mg oxide modified Douglas fir biochar (AMOB) were compared for their phosphate adsorbing abilities for use individually or in combination for simulated agriculture run-off remediation in wetlands. Aqueous batch and column sorption experiments were performed for both low-cost materials. AMOB was prepared in bulk using a novel green method. Material analyses included XRD, elemental analysis, SEM, EDX, and BET. Biochar and slag have different phosphate removal mechanisms. In short residence times (≤2 h), adsorption phenomena dominate for both adsorbents. Surface area likely plays a role in adsorption performance; slag was measured to be 4.1 m2/g while biochar’s surface area was 364.1 m2/g. In longer residence times (>2 h), the slow leaching of metals (Ca, Al, and Mg) from slag continue to remove phosphate through the precipitation of metal phosphates. In 24 h, slag removed more free phosphate from the solution than AMOB. Preliminary fixed bed column adsorption of slag or AMOB alone and in tandem was performed adopting a scaled-up model that can be used to remediate agricultural runoff with high phosphate content. Additionally, a desorption study was performed to analyze the efficiency of material regeneration. While AMOB does not release any adsorbed phosphates, slag slowly releases 5.7% adsorbed phosphate over seven days. 
    more » « less
  4. ; ; ; ; ; ; ; ; ; (, ChemElectroChem)
    The strong binding energy of CO on iron surfaces has rendered Fe electrodes as poor electrochemical CO2reduction (eCO2R) catalysts, predominantly producing hydrogen. Recent studies on tuning the microenvironment near the catalyst surfaces by tuning the local electric field in nonaqueous environments have been shown to promote eCO2R by facilitating the CO2activation step. Herein, the use of tetraethylammonium (TEA) cation to tune the electric field on Fe surfaces, such that it leads to the formation of industrially relevant oxalates (C2products), is reported. At optimal cation concentrations, the developed eCO2R system achieves 25 mA cm−2of current density and Faradaic Efficiencies up to 75% toward oxalate. Furthermore, in situ attenuated total reflectance Fourier transform infrared spectroscopy indicates the presence of surface‐adsorbed TEA cations and other species on the Fe surfaces, leading to the well‐known outer‐sphere mechanism of electron transfer during eCO2R. The employment of Fe, along with microenvironment tuning, not only demonstrates high catalytic performance but also provides a safer and more sustainable alternative to toxic catalysts such as Pb that dominate the nonaqueous eCO2R literature. These findings pave the way for further optimization and scale‐up of the process, offering a viable route for sustainable chemical production and CO2mitigation. 
    more » « less
  5. ; ; ; ; ; ; ; (, Environmental Science: Nano)
    Sanitary sewer overflows (SSOs) are a common problem across the United States. An estimated number of 23 000–75 000 SSOs occurred in 2004, discharging between 11 and 38 billion liters of untreated wastewater to receiving waters. SSOs release many contaminants, including engineered nanomaterials (ENMs), to receiving water bodies. Measuring ENM concentrations in environmental samples remains a key challenge in environmental nanotechnology and requires the distinction between natural and engineered particles. This distinction between natural and engineered particles is often hampered by the similarities in the intrinsic properties of natural and engineered particles, such as particle size, composition, density, and surface chemistry, and by the limitations of the available nanometrology tools. To overcome these challenges, we applied a multi-method approach to measure the concentrations and properties of TiO 2 engineered particles ( e.g. , ENMs and pigments) including: 1) multi element-single particle-inductively coupled plasma-mass spectrometry (ME-SP-ICP-MS) to identify elemental associations and to determine elemental ratios in natural particles, 2) calculation of total elemental concentrations and ratios from total metal concentrations measured following total sample digestion to estimate engineered particle concentrations, and 3) transmission electron microscopy (TEM) to characterize engineered particle size and morphology. ME-SP-ICP-MS analysis revealed that natural TiO 2 particles are often associated with at least one of the following elements: Al, Fe, Ce, Si, La, Zr, Nb, Pb, Ba, Th, Ta, W and U, and that elemental ratios of Ti to these elements, except Pb, are typical of riverine particulates and the average crustal ratios. High TiO 2 engineered particle concentrations up to 100 μg L −1 were found in SSO-impacted surface waters. TEM analysis demonstrated the presence of regular-shape TiO 2 particles in SSO-impacted surface waters. This study provides a comprehensive approach for measuring TiO 2 engineered particle concentrations in surface waters. The quantitative data produced in this work can be used as input for modeling studies and pave the way for routine monitoring of ENMs in environmental systems, validation of ENM fate models, and more accurate ENM exposure and risk assessment. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email