skip to main content


Title: Discrete Vortex Modeling of a Flapping Foil with Activated Leading Edge Motion
Energy harvesting performance for a flapping foil device is evaluated to determine how activated leading edge motion affects the aerodynamic forces and the cycle power generated. Results are obtained for a thin flat foil that pitches about the midchord and operates in the reduced frequency range of k = f c/U of 0.06 - 0.10 and Reynolds numbers of 20,000 and 30,000 with a pitching amplitude of 70 and heaving amplitude of h0 = 0.5c. Time resolved data are presented based on direct force measurements and are used to determine overall cycle efficiency and coefficient of power. These results are compared against a panelbased discrete vortex model to predict power production. The model incorporates a leading edge suction parameter predictor for vortex shedding and empirical adjustments to circulatory forces. It is found that the leading edge motions that reduce the effective angle of attack early in a flapping stroke generate larger forces later in the stroke. Consequently, the energy harvesting efficiencies and power coefficients are increased since the generated aerodynamic loads are better synchronized with the foil motion. The efficiency gains are reduced with increasing reduced frequencies.  more » « less
Award ID(s):
1804964
NSF-PAR ID:
10109944
Author(s) / Creator(s):
;
Date Published:
Journal Name:
ASME-JSME-KSME 2019 Joint Fluids Conference
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. The rising global trend to reduce dependence on fossil fuels has provided significant motivation toward the development of alternative energy conversion methods and new technologies to improve their efficiency. Recently, oscillating energy harvesters have shown promise as highly efficient and scalable turbines, which can be implemented in areas where traditional energy extraction and conversion are either unfeasible or cost prohibitive. Although such devices are quickly gaining popularity, there remain a number of hurdles in the understanding of their underlying fluid dynamics phenomena. The ability to achieve high efficiency power output from oscillating airfoil energy harvesters requires exploitation of the complexities of the event of dynamic stall. During dynamic stall, the oncoming flow separates at the leading edge of the airfoil to form leading ledge vortex (LEV) structures. While it is well known that LEVs play a significant role in aerodynamic force generation in unsteady animal flight (e.g. insects and birds), there is still a need to further understand their spatiotemporal evolution in order to design more effective energy harvesting enhancement mechanisms. In this work, we conduct extensive experimental investigations to shed-light on the flow physics of a heaving and pitching airfoil energy harvester operating at reduced frequencies of k = fc=U1 = 0.06-0.18, pitching amplitude of 0 = 75 and heaving amplitude of h0 = 0:6c. The experimental work involves the use of two-component particle image velocimetry (PIV) measurements conducted in a wind tunnel facility at Oregon State University. Velocity fields obtained from the PIV measurements are analyzed qualitatively and quantitatively to provide a description of the dynamics of LEVs and other flow structures that may be present during dynamic stall. Due to the difficulties of accurately measuring aerodynamic forces in highly unsteady flows in wind tunnels, a reduced-order model based on the vortex-impulse theory is proposed for estimating the aerodynamic loadings and power output using flow field data. The reduced-order model is shown to be dominated by two terms that have a clear physical interpretation: (i) the time rate of change of the impulse of vortical structures and (ii) the Kutta-Joukowski force which indirectly represents the history effect of vortex shedding in the far wake. Furthermore, the effects of a bio-inspired flow control mechanism based on deforming airfoil surfaces on the flow dynamics and energy harvesting performance are investigated. The results show that the aerodynamic loadings, and hence power output, are highly dependent on the formation, growth rate, trajectory and detachment of the LEV. It is shown that the energy harvesting efficiency increases with increasing reduced frequency, peaking at 25% when k = 0.14, agreeing very well with published numerical results. At this optimal reduced frequency, the time scales of the LEV evolution and airfoil kinematics are matched, resulting in highly correlated aerodynamic load generation and airfoil motion. When operating at k > 0:14, it is shown that the aerodynamic moment and airfoil pitching motion become negatively correlated and as a result, the energy harvesting performance is deteriorated. Furthermore, by using a deforming airfoil surface at the leading and trailing edges, the peak energy harvesting efficiency is shown to increase by approximately 17% and 25% relative to the rigid airfoil, respectively. The performance enhancement is associated with enhanced aerodynamic forces for both the deforming leading and trailing edges. In addition, The deforming trailing edge airfoil is shown to enhance the correlation between the aerodynamic moment and pitching motion at higher reduced frequencies, resulting in a peak efficiency at k = 0:18 as opposed to k = 0:14 for the rigid airfoil. 
    more » « less
  2. This study explores the feasibility of using the vortex impulse approach, based on experimen- tally generated velocity elds to estimate the energy harvesting performance of a sinusoidally apping foil. Phase-resolved, two-component particle image velocimetry measurements are conducted in a low-speed wind tunnel to capture the ow eld surrounding the apping foil at reduced frequencies of k = fc=U1 = 0.06 - 0.16, pitching amplitude of 0 = 70 and heaving amplitude of h0=c = 0:6. The model results show that for the conditions tested, a maximum energy harvesting eciency of 25% is attained near k = 0:14, agreeing very well with published numerical and experimental results in both accuracy and general trend. The vortex impulse method identi es key contributions to the transient power production from both linear and angular momentum e ects. The eciency reduction at larger values of reduced frequencies is shown to be a result of the reduced power output from the angular momentum. Further, the impulse formulation is decomposed into contributions from posi- tive and negative vorticity in the ow and is used to better understand the uid dynamic mechanisms responsible for producing a peak in energy harvesting performance at k = 0:14. At the larger k values, there is a reduction of the advective time scales of the leading edge vortex (LEV) formation. Consequently, the LEV that is shed during the previous half cycle interacts with the foil at the current half cycle resulting in a large negative pitching power due to the reversed direction of the kinematic motion. This vortex capture process signif- icantly decreases the total cycle averaged power output and energy harvesting eciency. These results show the link between the kinematic motion and LEV time scales that a ect the overall power production. 
    more » « less
  3. Abstract

    An experimental study was undertaken to evaluate the power extraction of an airfoil undergoing large amplitude pitching and heaving using a trailing edge flapping motion for the application of energy harvesting for steady flow over the airfoil. The airfoil was a NACA0015 design, pitching at the 1/3 chord position, with an actively controlled trailing edge flap hinged at the 2/3 chord location (chord length of c = 150mm and aspect ratio AR = 2, however end plates were used to simulate a two-dimensional airfoil). Data were obtained over a range of wind speeds corresponding to Reynolds numbers in the 30,000–60,000 range in a low-speed wind tunnel with turbulence intensities below 2%. The results are characterized using the reduced frequency, k = fc/U∞ over the range of 0.04–0.08, where f is the oscillating frequency in Hz, and U∞ is the freestream velocity. The pitching and heaving amplitudes are θ0 = 70° and h0 = 0.6c respectively, with a phase delay of 90°. Two trailing edge motion profiles are presented, examining the relative phase of trailing edge flap to the pitching phase. For each motion, a positive and negative case are considered. This is a total of 4 trailing edge motion profiles. Trailing edge motion amplitudes of 20° and 40° are compared and results contrasted. Direct transient force measurements were used to obtain the cycle variation of induced aerodynamic loads (lift coefficient) as well as the power output and efficiency. Results are used to identify the influence of trailing edge flap oscillations on the overall performance for energy harvesting, with a maximum efficiency increase of 21.3% and corresponding cycle averaged heaving power coefficient increase of 29.9% observed as a result of trailing edge motion.

     
    more » « less
  4. The application of a flapping foil with prescribed trailing edge motion to energy harvesting in a low reduced frequency (k = fc/U∞) regime was experimentally studied. The effects of the phase and amplitude of the applied trailing edge motion upon time-variant power extraction capability have been measured and are interpreted. On these bases, an optimized motion profile is developed. The airfoil design used was NACA0015 in profile with a chord length of c = 150mm, the pitching axis located at the 1/3 chord position, and an actively-controlled trailing edge flap hinged at the 2/3 chord location. The pitching and heaving amplitudes are θ0 = 70◦ and h0 = 0.6c respectively, with a phase delay of 90◦. Although the aspect ratio was 2, end plates were used to minimize 3-dimensional effects and simulate a 2-dimensional airfoil. Data were collected in a low-speed wind tunnel with turbulence intensities below 2%. The Reynolds number (Rec = U∞c/ν) range was 27, 000 ≤ Rec ≤ 60, 000 with a corresponding reduced frequency range of 0.04 ≤ k ≤ 0.10. The proposed trailing edge motion profile offers a measured maximum increase of 25.6% in cycle-averaged heaving power coefficient over a rigid foil operating under the same conditions. Results indicate that smaller trailing edge amplitudes offer greater improvements, and demonstrate that the influence of trailing edge motion can be more pronounced at low reduced frequencies. 
    more » « less
  5. The shape of a foil undergoing a combined pitching heaving motion is critical to its design in applications that demand high efficiency and thrust. This study focuses on understanding of how the shape of a foil affects its propulsive performance. We perform two-dimensional numerical simulations of fluid flows around a flapping foil for different governing parameters in the range of biological swimmers and bio-inspired underwater vehicles. By varying the foil shape using a class-shape transformation method, we investigate a broad range of foil-like shapes. In the study, we also show consistent results with previous studies that a thicker leading-edge and sharper trailing-edge makes for a more efficient foil shape undergoing a flapping motion. In addition, we explain that the performance of the foil is highly sensitive to its shape, specifically the thickness of the foil between the 18th and 50th percent along the chord of the foil. Moreover, we elucidate the flow mechanisms behind variations in performance metrics, particularly focused on constructive interference between the vortices generated at the leading-edge with the trailing-edge vortex, as well as the pressure field differences that lead to higher power consumption in less efficient foil shapes. 
    more » « less