Mechanical initiation of polymerization offers the chance to generate polymers in new environments using an energy source with unique capabilities. Recently, a renewed interest in mechanically controlled polymerization has yielded many techniques for controlled radical polymerization by ultrasound. However, other types of polymerizations induced by mechanical activation are rare, especially for generating high‐molecular‐weight polymers. Herein is an example of using piezoelectric ZnO nanoparticles to generate free‐radical species that initiate chain‐growth polymerization and polymer crosslinking. The fast generation of high amounts of reactive radicals enable the formation of polymer/gel by ultrasound activation. This chemistry can be used to harness mechanical energy for constructive purposes in polymeric materials and for controlled polymerizations for bulk‐scale reactions.
Mechanical initiation of polymerization offers the chance to generate polymers in new environments using an energy source with unique capabilities. Recently, a renewed interest in mechanically controlled polymerization has yielded many techniques for controlled radical polymerization by ultrasound. However, other types of polymerizations induced by mechanical activation are rare, especially for generating high‐molecular‐weight polymers. Herein is an example of using piezoelectric ZnO nanoparticles to generate free‐radical species that initiate chain‐growth polymerization and polymer crosslinking. The fast generation of high amounts of reactive radicals enable the formation of polymer/gel by ultrasound activation. This chemistry can be used to harness mechanical energy for constructive purposes in polymeric materials and for controlled polymerizations for bulk‐scale reactions.
more » « less- NSF-PAR ID:
- 10116452
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Angewandte Chemie
- Volume:
- 131
- Issue:
- 35
- ISSN:
- 0044-8249
- Page Range / eLocation ID:
- p. 12151-12154
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
Abstract -
more » « less
Abstract Atom transfer radical polymerization (ATRP), as one of the most successful controlled radical polymerization techniques, has been broadly used by polymer chemists and nonspecialists for synthesis of various functional materials, although the use of copper as traditional catalyst often results in undesired color or properties. The first homopolymerization of an initiable monomer, that is, inimer, is reported via metal‐free ATRP using 10‐phenylphenothiazine (Ph‐PTH) as photocatalyst in both solution and microemulsion media. Although polymerizations of inimers in both media can be carried out, only the microemulsion polymerization of methacrylate‐based inimer 1 effectively confines the random bimolecular reaction within each segregated latex and produces hyperbranched polymers with high molecular weight and low polydispersity. Several experimental parameters in the microemulsion polymerization of inimer 1 are subsequently studied, including the Ph‐PTH amount, the solids content of microemulsion, and the light source of irradiation. The results not only provide an effective method to tune the structure and molecular weights of hyperbranched polymers in confined‐space polymerization, but also expand the toolbox of using metal‐free ATRP method for synthesizing highly branched polymers in controlled manner.
-
Photoinduced atom transfer radical polymerization (photo-ATRP) has risen to the forefront of modern polymer chemistry as a powerful tool giving access to well-defined materials with complex architecture. However, most photo-ATRP systems can only generate radicals under biocidal UV light and are oxygen-sensitive, hindering their practical use in the synthesis of polymer biohybrids. Herein, inspired by the photoinduced electron transfer-reversible addition–fragmentation chain transfer (PET-RAFT) polymerization, we demonstrate a dual photoredox/copper catalysis that allows open-air ATRP under green light irradiation. Eosin Y was used as an organic photoredox catalyst (PC) in combination with a copper complex (X–Cu II /L). The role of PC was to trigger and drive the polymerization, while X–Cu II /L acted as a deactivator, providing a well-controlled polymerization. The excited PC was oxidatively quenched by X–Cu II /L, generating Cu I /L activator and PC˙ + . The ATRP ligand (L) used in excess then reduced the PC˙ + , closing the photocatalytic cycle. The continuous reduction of X–Cu II /L back to Cu I /L by excited PC provided high oxygen tolerance. As a result, a well-controlled and rapid ATRP could proceed even in an open vessel despite continuous oxygen diffusion. This method allowed the synthesis of polymers with narrow molecular weight distributions and controlled molecular weights using Cu catalyst and PC at ppm levels in both aqueous and organic media. A detailed comparison of photo-ATRP with PET-RAFT polymerization revealed the superiority of dual photoredox/copper catalysis under biologically relevant conditions. The kinetic studies and fluorescence measurements indicated that in the absence of the X–Cu II /L complex, green light irradiation caused faster photobleaching of eosin Y, leading to inhibition of PET-RAFT polymerization. Importantly, PET-RAFT polymerizations showed significantly higher dispersity values (1.14 ≤ Đ ≤ 4.01) in contrast to photo-ATRP (1.15 ≤ Đ ≤ 1.22) under identical conditions.more » « less
-
more » « less
Abstract Controlled radical polymerization (CRP) techniques enable the preparation of diverse, chemically tailored polymers with a variety of chain architectures. Separately, light‐mediated polymerization reactions offer a number of advantages over thermal polymerizations in terms of energy efficiency, sustainability, and versatility. Recent work has combined photopolymerization and CRP techniques to advance the synthesis of polymers with nonlinear architectures, including bottlebrush polymers, star polymers, hyperbranched polymers, and cyclic polymers. These photoCRP methods offer novel routes to nonlinear polymers using mild reaction conditions. In this review, we provide an overview of photoCRP techniques for the synthesis of nonlinear polymers. We start with a discussion of photoCRP applied to the synthesis of linear polymers and discuss the underlying reaction mechanisms. Then, we discuss photoCRP applied to the synthesis of bottlebrush, star, hyperbranched, cyclic, and surface‐initiated polymer brushes. For each case, we discuss the synthetic strategy and the unique properties and characteristics of the resulting polymers, and we provide a perspective on potential future directions for research.
-
Efficient transfer of halogen atoms is essential for controlling the growth of polymers in atom transfer radical polymerization (ATRP). The nature of halogens may influence the efficiency of the halogen atom transfer during the activation and deactivation processes. The effect of halogens can be associated with the C–X bond dissociation energy and the affinity of the halogens/halides to the transition metal catalyst. In this paper, we study the effect of halogens (Br vs. Cl) and reaction media in iron-catalyzed ATRP in the presence of halide anions as ligands. In Br-based initiating systems, polymerization of methacrylate monomers was well-controlled whereas Cl-based initiating systems provided limited control over the polymerization. The high affinity of the Cl atom to the iron catalyst renders it less efficient for fast deactivation of growing chains, resulting in polymers with molecular weights higher than predetermined by Δ[M]/[RX] o and with high dispersities. Conversely, Br can be exchanged with higher efficiency and hence provided good control over polymerization. Decreasing the polarity of the reaction medium improved the polymerization control. Polymerizations using ppm levels of the iron catalyst in acetonitrile (a more polar solvent) yielded polymers with larger dispersity values due to the slow rate of deactivation as opposed to the less polar solvent anisole, which afforded well-controlled polymers with dispersity <1.2.more » « less
