skip to main content


Title: Structural analysis and tectonic evolution of the western domain of the Eastern Kunlun Range, northwest Tibet
The Tibetan Plateau, the largest highland on Earth, formed due to the collision of India-Asia over the past 50−60 m.y., and the evolution of the Tibetan Plateau impacts our knowledge of continental tectonics. Examination of the northernmost margin of the Tibetan Plateau is key to unravelling the deformation mechanisms acting in northern Tibet. The left-slip Altyn Tagh fault system defines the northwest margin of the Tibetan Plateau, separating the Western and Eastern Kunlun Ranges in the southwest. Both Cenozoic and pre-Cenozoic crustal deformation events at this junction between the Altyn Tagh and Kunlun Ranges were responsible for the construction of northwestern Tibet, yet the relative contribution of each phase remains unconstrained. The western domain of the Eastern Kunlun Range is marked by active NE-trending, left-slip deformation of the Altyn Tagh fault and an E-striking Cenozoic thrust system developed in response India-Asia collision. To better constrain the Paleozoic Altyn Tagh and Kunlun orogens and establish the Cenozoic structural framework, we conducted an integrated investigation involving detailed geologic mapping (∼1:50,000 scale), U-Pb zircon geochronology, and synthesis of existing data sets across northwestern Tibet. Our new zircon analyses from Paleoproterozoic−Cretaceous strata constrain stratigraphic age and sediment provenance and highlight Proterozoic−Paleozoic arc activity. We propose a tectonic model for the Neoproterozoic−Mesozoic evolution of northwestern Tibet wherein restoration of an ∼56-km-long balanced cross section across the western domain of the Eastern Kunlun suggests that Cenozoic minimum shortening strain was ∼30% (∼24 km shortening). Field evidence suggests this shortening commenced after ca. 25−20 Ma, which yields an average long-term shortening rate of 1.2−0.9 mm yr−1 and strain rates of 4.7 × 10−16 s−1 to 2.3 × 10−16 s−1. Geometric considerations demonstrate that this contractional deformation did not significantly contribute to left-slip offset on the Altyn Tagh fault, which has ∼10 mm/yr slip rates.  more » « less
Award ID(s):
1914501
NSF-PAR ID:
10128968
Author(s) / Creator(s):
; ; ; ; ; ; ; ;
Date Published:
Journal Name:
GSA Bulletin
ISSN:
0016-7606
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. null (Ed.)
    The growth history and formation mechanisms of the Cenozoic Tibetan Plateau are the subject of an intense debate with important implications for understanding the kinematics and dynamics of large-scale intracontinental deformation. Better constraints on the uplift and deformation history across the northern plateau are necessary to address how the Tibetan Plateau was constructed. To this end, we present updated field observations coupled with low-temperature thermochronology from the Qaidam basin in the south to the Qilian Shan foreland in the north. Our results show that the region experienced a late Mesozoic cooling event that is interpreted as a result of tectonic deformation prior to the India-Asia collision. Our results also reveal the onset of renewed cooling in the Eocene in the Qilian Shan region along the northern margin of the Tibetan Plateau, which we interpret to indicate the timing of initial thrusting and plateau formation along the plateau margin. The interpreted Eocene thrusting in the Qilian Shan predates Cenozoic thrust belts to the south (e.g., the Eastern Kunlun Range), which supports out-of-sequence rather than northward-migrating thrust belt development. The early Cenozoic deformation exploited the south-dipping early Paleozoic Qilian suture zone as indicated by our field mapping and the existing geophysical data. In the Miocene, strike-slip faulting was initiated along segments of the older Paleozoic suture zones in northern Tibet, which led to the development of the Kunlun and Haiyuan left-slip transpressional systems. Late Miocene deformation and uplift of the Hexi corridor and Longshou Shan directly north of the Qilian Shan thrust belt represent the most recent phase of outward plateau growth. 
    more » « less
  2. The present topography of the northern Tibetan Plateau is characterized by the northwest-trending Eastern Kunlun Range, Qaidam Basin, and Qilian Shan, which figure importantly into the evolution and mechanism of Tibetan plateau development during Cenozoic Indo-Asian convergence. Understanding the Cenozoic deformation history and the source-to-sink relationship through time has significant implications for deciphering the growth history of the northern Tibetan Plateau. Despite decades of study, the timing, pattern, and mechanisms of deformation across the northern Tibetan Plateau are still vigorously debated. The North Qaidam thrust belt, located between the Qaidam Basin and Qilian Shan thrust belt, provides a valuable record of Cenozoic deformation in the northern Tibetan Plateau. Here, we present the results of new geologic mapping, structural and sedimentology analysis, and apatite fission track thermochronology to constrain the Cenozoic evolution history and reconstruct the paleogeomorphology of the eastern domain of the North Qaidam thrust belt and its foreland, the Wulan Basin. Our analyses reveal the North Qaidam thrust belt experienced multi-phase exhumation since the Cretaceous. A period of Eocene localized thrust-related uplift of the North Qaidam thrust belt initiated shortly after India-Asia collision, and lower erosion rates in the Oligocene allowed the thrust belt to expand along-strike eastward. Local uplift shed sediments to the southwest, directly into the Qaidam Basin. Reactivation of the proximal thrust faults and initiation of the northwest-striking right-slip Elashan fault at ca. 15−10 Ma drove the final accelerated mid-Miocene cooling and denudation to the surface. This phase of deformation established the overall framework morphology of the northeastern margin of the Tibetan Plateau, including the overall structure of the basins and ranges. 
    more » « less
  3. Abstract

    The Paleogene Lulehe Formation marks the onset of deposition in the Qaidam basin and preserves evidence of the initial topographic growth of northern Tibet. However, limited outcrops impede understanding of the sedimentary features of the Lulehe Formation as well as the tectonic relationship between the basin and surrounding topography. To fill this gap, we investigated core samples along the basin margin and conducted flexural modeling to estimate the topographic load of the Qilian Shan and Eastern Kunlun Shan during the deposition of the Lulehe Formation. Core samples reveal that the Lulehe Formation mainly consists of distal fluvial to marginal lacustrine deposits and proximal fluvial deposits along the southern margin of the basin while characterized by proximal alluvial fan deposits along the northern margin of the basin. Together with evidence for faulting shown on the seismic profiles, we infer that simultaneous deformation within the Qilian Shan and Altyn Tagh Shan during the Paleogene resulted in accumulation of coarse detrital deposits in the northwestern and northeastern Qaidam basin. The simultaneous deformation within the Altyn Tagh Shan and Qilian Shan since the Paleogene supports the idea that deformation in these two regions is kinematically linked. One‐ and two‐load beam flexural modeling indicates that the topographic load generated by both the Eastern Kunlun Shan and the Qilian Shan is responsible for the subsidence of the Qaidam basin during deposition of the Lulehe Formation. Our results highlight the initial relative high topography in the northern Tibetan plateau during the early Cenozoic.

     
    more » « less
  4. null (Ed.)
    Abstract The high strength of the Tarim Basin (northwestern China) lithosphere, widely regarded as a Precambrian craton, is evidenced by its resistance to Cenozoic deformation in the Himalayan-Tibetan orogen. However, Neoproterozoic suturing and early Paleozoic shortening within the Tarim Basin suggest that its rigidity is a relatively recent phenomenon with unknown cause. We reprocessed high-resolution magnetic data that show a 300–400-km-diameter radial pattern of linear anomalies emanating from a central region characterized by mixed positive-negative anomalies. We suggest that this pattern was generated by the previously hypothesized Permian (ca. 300–270 Ma) plume beneath the Tarim Basin. Constrained by published geochemical and geochronological data from plume-related igneous rocks, we propose that the ∼30 m.y. Permian plume activity resulted in a more viscous, depleted, thicker, dehydrated, and low-density mantle lithosphere. The resulting stronger lithosphere deflected strain from the Cenozoic India-Asia convergence around Tarim Basin, including Pamir overthrusting to the northwest and Altyn Tagh left-slip displacement to the northeast, thus shaping the geometry of the Himalayan-Tibetan orogen. 
    more » « less
  5. Abstract

    The timing of crustal shortening and strike‐slip faulting along the East Kunlun Shan provides insight into the history of surface uplift and may constrain the time at which the Tibetan Plateau reached high elevations. We investigate a series of extensional basins and restraining bends along the Xidatan strand of the Kunlun strike‐slip fault, which provide an ideal setting to unravel the tectonic history of the northern plateau margin. We present new apatite (U‐Th)/He, apatite fission track, and zircon (U‐Th)/He ages and QTQt thermal modeling,40Ar/39Ar fault gouge dating, and structural mapping from the central East Kunlun Shan. Our data suggest that the East Kunlun Shan experienced slow to negligible exhumation until late Cretaceous time, followed by an increase in rate by 65–50 Ma. Along with a ~47 Ma fault gouge age, we posit that the Paleocene–early Eocene was a time of crustal shortening along the northern plateau. Rapid exhumation along transpressional portions of the Xidatan fault initiated by 23–20 Ma, which we interpret as the local onset of strike‐slip faulting. An early Miocene transition from north‐south crustal shortening to left‐lateral shear along the East Kunlun Shan, the onset of normal and strike‐slip faulting in central and southern Tibet by 18 Ma, and lower crustal flow in eastern Tibet by 13 Ma suggest the establishment of orogen‐wide east‐west oriented extension and extrusion by the middle Miocene. The plateau‐wide shift in stress accommodation implies that high gravitational potential energy, and likely high elevation, was attained by the middle Miocene.

     
    more » « less