Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: The role of the medium in the effective-sphere interpretation of holographic particle characterization data
The in-line hologram of a micrometer-scale colloidal sphere can be analyzed with the Lorenz–Mie theory of light scattering to obtain precise measurements of the sphere's diameter and refractive index. The same technique also can be used to characterize porous and irregularly shaped colloidal particles provided that the extracted parameters are interpreted with effective-medium theory to represent the properties of an equivalent effective sphere. Here, we demonstrate that the effective-sphere model consistently accounts for changes in the refractive index of the medium as it fills the pores of porous particles and therefore yields quantitative information about such particles' structure and composition. In addition to the sample-averaged porosity, holographic perfusion porosimetry gauges the polydispersity of the porosity. We demonstrate these capabilities through measurements on mesoporous spheres, fractal protein aggregates and irregular nanoparticle agglomerates, all of which are noteworthy for their industrial significance.  more » « less
Award ID(s):
1631815
PAR ID:
10131292
Author(s) / Creator(s):
; ; ; ; ;
Date Published:
Journal Name:
Soft Matter
ISSN:
1744-683X
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; (, Soft Matter)
    null (Ed.)
    An in-line hologram of a colloidal sphere can be analyzed with the Lorenz–Mie theory of light scattering to measure the sphere's three-dimensional position with nanometer-scale precision while also measuring its diameter and refractive index with part-per-thousand precision. Applying the same technique to aspherical or inhomogeneous particles yields measurements of the position, diameter and refractive index of an effective sphere that represents an average over the particle's geometry and composition. This effective-sphere interpretation has been applied successfully to porous, dimpled and coated spheres, as well as to fractal clusters of nanoparticles, all of whose inhomogeneities appear on length scales smaller than the wavelength of light. Here, we combine numerical and experimental studies to investigate effective-sphere characterization of symmetric dimers of micrometer-scale spheres, a class of aspherical objects that appear commonly in real-world dispersions. Our studies demonstrate that the effective-sphere interpretation usefully distinguishes small colloidal clusters in holographic characterization studies of monodisperse colloidal spheres. The effective-sphere estimate for a dimer's axial position closely follows the ground truth for its center of mass. Trends in the effective-sphere diameter and refractive index, furthermore, can be used to measure a dimer's three-dimensional orientation. When applied to colloidal dimers transported in a Poiseuille flow, the estimated orientation distribution is consistent with expectations for Brownian particles undergoing Jeffery orbits. 
    more » « less
  2. ; ; ; ; ; ; (, The Astrophysical Journal)
    Abstract Dust particle sizes constrained from dust continuum and polarization observations by radio interferometry are inconsistent by at least an order of magnitude. Motivated by porous dust observed in small solar system bodies (e.g., from the Rosetta mission), we explore how the dust particle’s porosity affects the estimated particle sizes from these two methods. Porous particles have lower refractive indices, which affect both opacity and polarization fraction. With weaker Mie interference patterns, the porous particles have lower opacity at millimeter wavelengths than the compact particles if the particle size exceeds several hundred microns. Consequently, the inferred dust mass using porous particles can be up to a factor of six higher. The most significant difference between compact and porous particles is their scattering properties. The porous particles have a wider range of particle sizes with high linear polarization from dust self-scattering, allowing millimeter- to centimeter-sized particles to explain polarization observations. With a Bayesian approach, we use porous particles to fit HL Tau disk’s multiwavelength continuum and millimeter-polarization observations from the Atacama Large Millimeter/submillimeter Array (ALMA) and the Very Large Array (VLA). The moderately porous particles with sizes from 1 mm–1 m can explain both continuum and polarization observations, especially in the region between 20 and 60 au. If the particles in HL Tau are porous, the porosity should be from 70%–97% from current polarization observations. We also predict that future observations of the self-scattering linear polarization at longer wavelengths (e.g., ALMA B1 and ngVLA) have the potential to further constrain the particle’s porosity and size. 
    more » « less
  3. ; (, Journal of Chemical Theory and Computation)
    Self-assembly of colloidal particles is emerging as a promising approach for producing novel materials. These colloidal particles can be synthesized with protrusions (lobes) on their surfaces that allow the formation of porous structures with a wide range of applications. Using Langevin dynamics simulations, we studied self-assembly in the binary mixtures of lobed colloidal particles with variations in their lobe sizes to investigate the feasibility of using dumbbell particles (with two lobes) as cross-linkers to increase the porosity in self-assembled morphologies. Each binary system was formed by mixing the dumbbell particles with one of the following types of particles: trigonal planar (three lobes), tetrahedral (four lobes), trigonal bipyramidal (five lobes), and octahedral (six lobes). We observed that the lobe size on each particle can be tuned to favor the formation of random aggregates and spherical aggregates when the lobes are larger and well-ordered crystalline structures when the lobes are smaller. We also observed that these polydisperse systems form self-assembled structures characterized by porosities higher than those of the structures formed by the monodisperse systems. These results indicate that the lobe size is an important design feature that can be optimized to achieve desired structures with distinct morphologies and porosities, and the dumbbell particles are effective cross-linking agents to enhance the porosity in self-assembled structures. 
    more » « less
  4. ; (, The Journal of Physical Chemistry C)
    The optical trapping of colloidal semiconductor nanomaterials would enable single-particle photophysics, sensing, and chemical measurements. Yet, the trapping of these materials has lagged behind other dielectric and metallic materials due to the prevalence of aqueous solvents in optical trapping experiments, which are not suitable for many semiconductors. Here, we trap particles in multiple solvents and study the impact of nonaqueous solvents on optical trapping dynamics. These experiments and calculations show that there exists an optimal refractive index of the media that maximizes trapping strength and for colloidal nanomaterials a universal relationship to enhance trap strength. We also find that viscosity has no impact on the trap strength and changes only the residence times of particles in unstable traps. Trap stiffness measurements also show that photothermal effects, which are enhanced in nonaqueous solvents, can lead to convection, which modifies trap stiffnesses. These results provide an understanding of how solvent selection impacts trapping dynamics and general design rules for experiments in nonaqueous solvents, opening the door for improved sensing, chemistry, and photophysics studies using colloidal micro- and nanomaterials. 
    more » « less
  5. ; ; ; (, Physical Chemistry Chemical Physics)
    Refractive index is an optical property explored in the light scattering measurement of micro- and nano-particles as well as in label-free imaging of cells and tissues. Because the refractive index value is a major input to the characterization and quantification of the analyzed specimens, various methods have been developed targeting at different sample types. In this paper, we demonstrate a technique for the refractive index measurement of homogeneous microspheres and liquids in the short-wave infrared (SWIR) range. We use synthetic phase microscopy (SPM), which records a scattering-corrected projection of the 3D refractive index distribution, in combination with a least-squares fitting to a theoretical model of a sphere. Using the method, we determine the refractive index dispersion of two polymer microspheres (polymethyl methacrylate and polystyrene), two glass microspheres (silica and soda lime), and three microscopy mounting media (glycerol, FluorSave, and Eukitt) in the SWIR range of 1100–1650 nm. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Text Encoded Conversion
  • XML
  • Save / Share this Record
  • Send to Email