skip to main content

Explore Research Products in the NSF-PAR

Title: Improving structured population models with more realistic representations of non‐normal growth
Abstract

Structured population models are among the most widely used tools in ecology and evolution. Integral projection models (IPMs) use continuous representations of how survival, reproduction and growth change as functions of state variables such as size, requiring fewer parameters to be estimated than projection matrix models (PPMs). Yet, almost all published IPMs make an important assumption that size‐dependent growth transitions are or can be transformed to be normally distributed. In fact, many organisms exhibit highly skewed size transitions. Small individuals can grow more than they can shrink, and large individuals may often shrink more dramatically than they can grow. Yet, the implications of such skew for inference from IPMs has not been explored, nor have general methods been developed to incorporate skewed size transitions into IPMs, or deal with other aspects of real growth rates, including bounds on possible growth or shrinkage.

Here, we develop a flexible approach to modelling skewed growth data using a modified beta regression model. We propose that sizes first be converted to a (0,1) interval by estimating size‐dependent minimum and maximum sizes through quantile regression. Transformed data can then be modelled using beta regression with widely available statistical tools. We demonstrate the utility of this approach using demographic data for a long‐lived plant, gorgonians and an epiphytic lichen. Specifically, we compare inferences of population parameters from discrete PPMs to those from IPMs that either assume normality or incorporate skew using beta regression or, alternatively, a skewed normal model.

The beta and skewed normal distributions accurately capture the mean, variance and skew of real growth distributions. Incorporating skewed growth into IPMs decreases population growth and estimated life span relative to IPMs that assume normally distributed growth, and more closely approximate the parameters of PPMs that do not assume a particular growth distribution. A bounded distribution, such as the beta, also avoids the eviction problem caused by predicting some growth outside the modelled size range.

Incorporating biologically relevant skew in growth data has important consequences for inference from IPMs. The approaches we outline here are flexible and easy to implement with existing statistical tools.

  more » « less
Award ID(s):
1753980 1753954
NSF-PAR ID:
10447900
Author(s) / Creator(s):
 ;  ;  ;  ;
Publisher / Repository:
Wiley-Blackwell
Date Published:
Journal Name:
Methods in Ecology and Evolution
Volume:
10
Issue:
9
ISSN:
2041-210X
Page Range / eLocation ID:
p. 1431-1444
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; ; ; ; ( , Functional Ecology)
    Abstract

    Temporal fluctuations in growth rates can arise from both variation in age‐specific vital rates and temporal fluctuations in age structure (i.e. the relative abundance of individuals in each age‐class). However, empirical assessments of temporal fluctuations in age structure and their effects on population growth rate are relatively rare. Most research has focused on understanding the contribution of changing vital rates to population growth rates and these analyses routinely assume that: (a) populations have stable age distributions, (b) environmental influences on vital rates and age structure are stationary (i.e. the mean and/or variance of these processes does not change over time), and (c) dynamics are independent of density.

    Here we quantified fluctuations in age structure and assessed whether they were stationary for four populations of free‐ranging vertebrates: moose (observed for 48 years), elk (15 years), tawny owls (15 years) and grey wolves (17 years). We also assessed the extent that fluctuations in age structure were useful for predicting annual population growth rates using models which account for density dependence.

    Fluctuations in age structure were of a similar magnitude to fluctuations in abundance. For three populations (moose, elk, owls), the mean and the skew of the age distribution fluctuated without stabilizing over the observed time periods. More precisely, the sample variance (interannual variance) of age structure indices increased with the length of the study period, which suggests that fluctuations in age structure were non‐stationary for these populations – at least over the 15‐ to 48‐year periods analysed.

    Fluctuations in age structure were associated with population growth rate for two populations. In particular, population growth varied from positive to negative for moose and from near zero to negative for elk as the average age of adults increased over its observed range.

    Non‐stationarity in age structure may represent an important mechanism by which abundance becomes non‐stationary – and therefore difficult to forecast – over time‐scales of concern to wildlife managers. Overall, our results emphasize the need for vertebrate populations to be modelled using approaches that consider transient dynamics and density dependence and that do not rely on the assumption that environmental processes are stationary.

    A freePlain Language Summarycan be found within the Supporting Information of this article.

     
    more » « less
  2. ; ; ; ; ; ( , Methods in Ecology and Evolution)
    Abstract

    Metapopulation models include spatial population dynamics such as dispersion and migration between subpopulations. Integral projection models (IPMs) can include demographic rates as a function of size. Traditionally, metapopulation models do not included detailed populaiton models such as IPMs. In some situations, both local population dynamics (e.g. size‐based survival) and spatial dynamics are important.

    We present a Python package,MetaIPM, which places IPMs into a metapopulation framework, and allow users to readily construct and apply these models that combine local population dynamics within a metapopulation framework.

    MetaIPMincludes an IPM for each subpopulation that is connected to other subpopulations via a metapopulation movement model. These movements can include dispersion, migration or other patterns. The IPM can include for size‐specific demographic rates (e.g. survival, recruitment) as well as management actions, such as length‐based harvest (e.g. gear specific capture sizes, varying slot limits across political boundaries). The model also allows for changes in metapopulation connectivity between locations, such as a fish passage ladders to enhance movement or deterrents to reduce movement. Thus, resource managers can useMetaIPMto compare different management actions such as the harvest gear type (which can be length‐specific) and harvest locations.

    We demonstrate howMetaIPMmay be applied to inform managers seeking to limit the spread of an invasive species in a system with important metapopulation dynamics. Specifically, we compared removal lengths (all length fish versus longer fish only) for an invasive fish population in a fragmented, inland river system.MetaIPMallowed users to compare the importance of harvesting source populations away from the invasion front, as well as species at the invasion front. The model would also allow for future comparisons of different deterrent placement locations in the system.

    Moving beyond our example system, we describe howMetaIPMcan be applied to other species, systems and management approaches. TheMetaIPMpackages includes Jupyter Notebooks documenting the package as well as a second set of JupyterNotebooks showing the application of the package to our example system.

     
    more » « less
  3. ; ; ; ; ; ; ; ; ; ; et al ( , Ecological Monographs)
    Abstract

    Structured demographic models are among the most common and useful tools in population biology. However, the introduction of integral projection models (IPMs) has caused a profound shift in the way many demographic models are conceptualized. Some researchers have argued that IPMs, by explicitly representing demographic processes as continuous functions of state variables such as size, are more statistically efficient, biologically realistic, and accurate than classic matrix projection models, calling into question the usefulness of the many studies based on matrix models. Here, we evaluate how IPMs and matrix models differ, as well as the extent to which these differences matter for estimation of key model outputs, including population growth rates, sensitivity patterns, and life spans. First, we detail the steps in constructing and using each type of model. Second, we present a review of published demographic models, concentrating on size‐based studies, which shows significant overlap in the way IPMs and matrix models are constructed and analyzed. Third, to assess the impact of various modeling decisions on demographic predictions, we ran a series of simulations based on size‐based demographic data sets for five biologically diverse species. We found little evidence that discrete vital rate estimation is less accurate than continuous functions across a wide range of sample sizes or size classes (equivalently bin numbers or mesh points). Most model outputs quickly converged with modest class numbers (≥10), regardless of most other modeling decisions. Another surprising result was that the most commonly used method to discretize growth rates for IPM analyses can introduce substantial error into model outputs. Finally, we show that empirical sample sizes generally matter more than modeling approach for the accuracy of demographic outputs. Based on these results, we provide specific recommendations to those constructing and evaluating structured population models. Both our literature review and simulations question the treatment of IPMs as a clearly distinct modeling approach or one that is inherently more accurate than classic matrix models. Importantly, this suggests that matrix models, representing the vast majority of past demographic analyses available for comparative and conservation work, continue to be useful and important sources of demographic information.

     
    more » « less
  4. ; ; ; ; ; ; ; ; ; ( , Methods in Ecology and Evolution)
    Abstract

    Biodiversity studies rely heavily on estimates of species' distributions often obtained through ecological niche modelling. Numerous software packages exist that allow users to model ecological niches using machine learning and statistical methods. However, no existing package with a graphical user interface allows users to perform model calibration and selection based on convex forms such as ellipsoids, which may match fundamental ecological niche shapes better, incorporating tools for exploring, modelling, and evaluating niches and distributions that are intuitive for both novice and proficient users.

    Here we describe anrpackage, NicheToolBox(ntbox), that allows users to conduct all processing steps involved in ecological niche modelling: downloading and curating occurrence data, obtaining and transforming environmental data layers, selecting environmental variables, exploring relationships between geographic and environmental spaces, calibrating and selecting ellipsoid models, evaluating models using binomial and partial ROC tests, assessing extrapolation risk, and performing geographic information system operations via a graphical user interface. A summary of the entire workflow is produced for use as a stand‐alone algorithm or as part of research reports.

    The method is explained in detail and tested via modelling the threatened feline speciesLeopardus wiedii. Georeferenced occurrence data for this species are queried to display both point occurrences and the IUCN extent of occurrence polygon (IUCN, 2007). This information is used to illustrate tools available for accessing, processing and exploring biodiversity data (e.g. number of occurrences and chronology of collecting) and transforming environmental data (e.g. a summary PCA for 19 bioclimatic layers). Visualizations of three‐dimensional ecological niches modelled as minimum volume ellipsoids are developed with ancillary statistics. This niche model is then projected to geographic space, to represent a corresponding potential suitability map.

    Usingntboxallows a fast and straightforward means by which to retrieve and manipulate occurrence and environmental data, which can then be implemented in model calibration, projection and evaluation for assessing distributions of species in geographic space and their corresponding environmental combinations.

     
    more » « less
  5. ; ; ; ; ; ; ; ( , Ecological Applications)
    Abstract

    Integral projection models (IPMs) can estimate the population dynamics of species for which both discrete life stages and continuous variables influence demographic rates. Stochastic IPMs for imperiled species, in turn, can facilitate population viability analyses (PVAs) to guide conservation decision‐making. Biphasic amphibians are globally distributed, often highly imperiled, and ecologically well suited to the IPM approach. Herein, we present a stochastic size‐ and stage‐structured IPM for a biphasic amphibian, the U.S. federally threatened California tiger salamander (CTS) (Ambystoma californiense). This Bayesian model reveals that CTS population dynamics show greatest elasticity to changes in juvenile and metamorph growth and that populations are likely to experience rapid growth at low density. We integrated this IPM with climatic drivers of CTS demography to develop a PVA and examined CTS extinction risk under the primary threats of habitat loss and climate change. The PVA indicated that long‐term viability is possible with surprisingly high (20%–50%) terrestrial mortality but simultaneously identified likely minimum terrestrial buffer requirements of 600–1000 m while accounting for numerous parameter uncertainties through the Bayesian framework. These analyses underscore the value of stochastic and Bayesian IPMs for understanding both climate‐dependent taxa and those with cryptic life histories (e.g., biphasic amphibians) in service of ecological discovery and biodiversity conservation. In addition to providing guidance for CTS recovery, the contributed IPM and PVA supply a framework for applying these tools to investigations of ecologically similar species.

     
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email