skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.


Title: Spatiotemporal Evolution of the Microphysical and Thermodynamic Characteristics of the 20 June 2015 PECAN MCS
This study examines microphysical and thermodynamic characteristics of the 20 June 2015 mesoscale convective system (MCS) observed during the Plains Elevated Convection At Night (PECAN) experiment, specifically within the transition zone (TZ), enhanced stratiform rain region (ESR), anvil region, melting layer (ML), and the rear inflow jet (RIJ). Analyses are developed from airborne optical array probe data and multiple-Doppler wind and reflectivity syntheses using data from the airborne NOAA Tail Doppler Radar (TDR) and ground-based Weather Surveillance Radar-1988 Doppler (WSR-88D) radars. Seven spiral ascents/descents of the NOAA P-3 aircraft were executed within various regions of the 20 June MCS. Aggregation modified by sublimation was observed in each MCS region, regardless of whether the sampling was within the RIJ. Sustained sublimation and evaporation of precipitation in subsaturated layers led to a trend of downward moistening across the ESR spirals, with greater degrees of subsaturation maintained when in the vicinity of the descending RIJ. In all cases where melting was observed, the ML acted as a prominent thermodynamic boundary, with differing rates of change in temperature and relative humidity above and below the ML. Two spiral profiles coincident with the rear inflow notch provided unique observations within the TZ and were interpreted in the context of similar observations from the 29 June 2003 Bow Echo and Mesoscale Convective Vortex Experiment MCS. There, sublimation cooling and enhanced descent within the RIJ allowed ice particles to survive to temperatures as warm as +6.8°C before completely sublimating/evaporating.  more » « less
Award ID(s):
1842094 1841966
PAR ID:
10139555
Author(s) / Creator(s):
 ;  ;  ;  ;  ;  
Publisher / Repository:
American Meteorological Society
Date Published:
Journal Name:
Monthly Weather Review
Volume:
148
Issue:
4
ISSN:
0027-0644
Page Range / eLocation ID:
p. 1363-1388
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. van den Heever, S. (Ed.)
    Vertical profiles of temperature, relative humidity, cloud particle concentration, median mass dimension, and mass content were derived using instruments on the NOAA P-3 aircraft for 37 spiral ascents/descents flown within five mesoscale convective systems (MCSs) during the 2015 Plains Elevated Convection at Night (PECAN) project, and 16 spiral descents of the NOAA P-3 within 10 MCSs during the 2003 Bow Echo and Mesoscale Convective Vortex Experiment (BAMEX). The statistical distribution of thermodynamic and microphysical properties within these spirals is presented in context of three primary MCS regions—the transition zone (TZ), enhanced stratiform rain region (ESR), and the anvil region (AR)—allowing deductions concerning the relative importance and nature of microphysical processes in each region. Aggregation was ubiquitous across all MCS zones at subfreezing temperatures, where the degree of ambient subsaturation, if present, moderated the effectiveness of this process via sublimation. The predominately ice-supersaturated ESR experienced the least impact of sublimation on microphysical characteristics relative to the TZ and AR. Aggregation was most limited by sublimation in the ice-subsaturated AR, where total particle number and mass concentrations decreased most rapidly with increasing temperature. Sublimation cooling at the surface of ice particles in the TZ, the driest of the three regions, allowed ice to survive to temperatures as high as +6.8°C. Two spirals executed behind a frontal squall line exhibited a high incidence of pristine ice crystals, and notably different characteristics from most other spirals. Gradual meso- to synoptic-scale ascent in this region likely contributed to the observed differences. 
    more » « less
  2. Abstract The Organization of Tropical East Pacific Convection project used dropsondes deployed from high altitude and a downward‐pointing W‐band Doppler radar to document the characteristics of mesoscale convective systems (MCSs) located over the Pacific coastal waters of Colombia. MCSs dominated by ice crystal aggregates above the freezing level rather than graupel, as shown by the radar, are generally thought to indicate decaying stratiform rain systems with only light rain. However, dropsonde grids showed a broader range of MCS types in this category, some with shallow convection producing intense rainfall. The radar had difficulty in distinguishing between different types of aggregate‐dominated MCSs. 
    more » « less
  3. Abstract Idealized numerical simulations of Mesoscale Convective Systems (MCSs) over a range of instabilities and shears were conducted to examine low-frequency gravity waves generated during initial and mature stages of convection. In all simulations, at initial updraft development a first-order wave was generated by heating extending the depth of the troposphere. Additional first-order wave modes were generated each time the convective updraft reintensified. Each of these waves stabilized the environment in advance of the system. As precipitation descended below cloud base, and as a stratiform precipitation region developed, second-order wave modes were generated by cooling extending from the mid-levels to the surface. These waves destabilized the environment ahead of the system but weakened the 0-5 km shear. Third-order wave modes could be generated by mid-level cooling caused by rear inflow intensification; these wave modes cooled the mid-levels destabilizing the environment. The developing stage of each MCS was characterized by a cyclical process: developing updraft, generation of n = 1 wave, increase in precipitation, generation of n = 2 wave, and subsequent environmental destabilization reinvigorating the updraft. After rearward expansion of the stratiform region, the MCSs entered their mature stage and the method of updraft reinvigoration shifted to absorbing discrete convective cells produced in advance of each system. Higher-order wave modes destabilized the environment making it more favorable to development of these cells and maintenance of the MCS. As initial simulation shear or instability increased, the transition from cyclical wave/updraft development to discrete cell/updraft development occurred more quickly. 
    more » « less
  4. This research assesses the utility and validity of using simulated radar reflectivity to detect potential changes in linear and nonlinear mesoscale convective system (MCS) occurrence in the Midwest United States between the early and late 21st century using convection‐permitting climate simulation output. These data include a control run and a pseudo‐global warming (PGW) run that is based on RCP 8.5. First, using a novel segmentation, classification, and tracking procedure, MCS tracks are extracted from observed and simulated radar reflectivity. Next, a comparison between observed and the control run MCS statistics is performed, which finds a negative summertime bias that agrees with previous work. Using a convolutional neural network to perform probabilistic predictions, the MCS dataset is further stratified into highly organized, quasi‐linear convective systems (QLCSs)—which can include bow echoes, squall lines, and line echo wave patterns—and generally less‐organized, non‐QLCS events. The morphologically stratified data reveal that the negative MCS bias in this region is largely driven by too few QLCSs. Although comparisons between the control run and a PGW run suggest that all MCS events are less common in the future (including QLCS and non‐QLCS events), these changes are not spatially significant, whereas the biases between the control run and observations are spatially significant. A discussion on the importance and challenges of simulating QLCSs in convection‐permitting climate model runs is provided. Finally, potential avenues of exploration are suggested related to the aforementioned issues. 
    more » « less
  5. Cheng, Y (Ed.)
    Abstract This study used radar observations and a high-resolution numerical simulation to explore the interactions between an mesoscale convective system (MCS), cold pool outflows, and atmospheric bores in a non-uniform baroclinic environment. The bores were generated by a nocturnal MCS that occurred on 2–3 June 2017 over the southern North China Plain. The goal of this investigation is to determine how the structure of bores varied within this non-uniform environment and whether and how the bores would maintain the MCS and alter its structure. To the southwest of the MCS, where there was large CAPE and a well-mixed boundary layer, discrete convection initiation occurred behind a single radar fine line (RFL) maintaining the propagation of the MCS. To the southeast of the MCS, multiple RFLs were found suggesting the generation of an undular bore in an environment containing an intense nocturnal stable boundary layer with dry upper layers and little CAPE. Hydraulic and nonlinear theory were applied to the simulation of the MCS revealing that the differences in the bore evolution depended on both the characteristics of the cold pool and the variations in the ambient environment. Thus, the characteristics of the ambient environment and the associated differences in bore structure impacted the maintenance and organization of the MCS. This study implies the importance of an accurate representation of the low-level ambient environment and the microphysics and kinematics within the MCS to accurately simulate and forecast cold pools, the generation and evolution of bores, and their impact on nocturnal MCSs. 
    more » « less