Materials with tunable infrared refractive index changes have enabled active metasurfaces for novel control of optical circuits, thermal radiation, and more. Ion‐gel‐gated epitaxial films of the perovskite cobaltite La1−
The ability to tailor a new crystalline structure and associated functionalities with a variety of stimuli is one of the key issues in material design. Developing synthetic routes to functional materials with partially absorbed nonmetallic elements (i.e., hydrogen and nitrogen) can open up more possibilities for preparing novel families of electronically active oxide compounds. Fast and reversible uptake and release of hydrogen in epitaxial ABO3manganite films through an adapted low‐frequency inductively coupled plasma technology is introduced. Compared with traditional dopants of metallic cations, the plasma‐assisted hydrogen implantations not only produce reversibly structural transformations from pristine perovskite (PV) phase to a newly found protonation‐driven brownmillerite one but also regulate remarkably different electronic properties driving the material from a ferromagnetic metal to a weakly ferromagnetic insulator for a range of manganite (La1−
- Award ID(s):
- 1708615
- NSF-PAR ID:
- 10460759
- Author(s) / Creator(s):
- ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; more »
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Advanced Functional Materials
- Volume:
- 29
- Issue:
- 50
- ISSN:
- 1616-301X
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
Abstract x Srx CoO3−δ (LSCO) with 0.00 ≤x ≤ 0.70 offer a new route to significant, voltage‐tuned, nonvolatile refractive index modulation for infrared active metasurfaces, shown here through Kramers–Kronig‐consistent dispersion models, structural and electronic transport characterization, and electromagnetic simulations before and after electrochemical reduction. As‐grown perovskite films are high‐index insulators forx < 0.18 but lossy metals forx > 0.18, due to a percolation insulator‐metal transition. Positive‐voltage gating of LSCO transistors withx > 0.18 reveals a metal‐insulator transition from the metallic perovskite phase to a high‐index (n > 2.5), low‐loss insulating phase, accompanied by a perovskite to oxygen‐vacancy‐ordered brownmillerite transformation at highx . Atx < 0.18, despite nominally insulating character, the LSCO films undergo remarkable refractive index changes to another lower‐index, lower‐loss insulating perovskite state with Δn > 0.6. In simulations of plasmonic metasurfaces, these metal‐insulator and insulator‐insulator transitions support significant, varied mid‐infrared reflectance modulation, thus framing electrochemically gated LSCO as a diverse library of room‐temperature phase‐change materials for applications including dynamic thermal imaging, camouflage, and optical memories. -
more » « less
Abstract Solid-state control of the thermal conductivity of materials is of exceptional interest for novel devices such as thermal diodes and switches. Here, we demonstrate the ability to
continuously tune the thermal conductivity of nanoscale films of La0.5Sr0.5CoO3-δ (LSCO) by a factor of over 5, via a room-temperature electrolyte-gate-induced non-volatile topotactic phase transformation from perovskite (withδ ≈ 0.1) to an oxygen-vacancy-ordered brownmillerite phase (withδ = 0.5), accompanied by a metal-insulator transition. Combining time-domain thermoreflectance and electronic transport measurements, model analyses based on molecular dynamics and Boltzmann transport equation, and structural characterization by X-ray diffraction, we uncover and deconvolve the effects of these transitions on heat carriers, including electrons and lattice vibrations. The wide-range continuous tunability of LSCO thermal conductivity enabled by low-voltage (below 4 V) room-temperature electrolyte gating opens the door to non-volatile dynamic control of thermal transport in perovskite-based functional materials, for thermal regulation and management in device applications. -
more » « less
Abstract Cobalt oxides have long been understood to display intriguing phenomena known as spin-state crossovers, where the cobalt ion spin changes vs. temperature, pressure, etc. A very different situation was recently uncovered in praseodymium-containing cobalt oxides, where a first-order coupled spin-state/structural/metal-insulator transition occurs, driven by a remarkable praseodymium valence transition. Such valence transitions, particularly when triggering spin-state and metal-insulator transitions, offer highly appealing functionality, but have thus far been confined to cryogenic temperatures in bulk materials (e.g., 90 K in Pr1-
x Cax CoO3). Here, we show that in thin films of the complex perovskite (Pr1-y Yy )1-x Cax CoO3-δ, heteroepitaxial strain tuning enables stabilization of valence-driven spin-state/structural/metal-insulator transitions to at least 291 K, i.e., around room temperature. The technological implications of this result are accompanied by fundamental prospects, as complete strain control of the electronic ground state is demonstrated, from ferromagnetic metal under tension to nonmagnetic insulator under compression, thereby exposing a potential novel quantum critical point. -
more » « less
Abstract The present paper reports the multifunctional properties of lead‐free BiFeO3–La (BFO–La) thin films. The structural, microstructural, and optical properties have been investigated as a function of the lanthanum doping concentration. The structural properties at room temperature showed the formation of the perovskite structure, thus suggesting the high quality of the obtained thin film compositions. Raman spectroscopy analysis revealed a slight variation in both the peak position and absolute intensity for the Raman active modes, as lanthanum content increases in BiFeO3–La. Crystallized thin films with well‐defined grains as well as crack‐free surfaces have been obtained, for all the studied compositions, as inferred from atomic force microscopy images. The optical properties have been measured, and the values for the direct bandgap was significantly lower than those reported for other BFO‐based systems, being the lowest ∼1.87 eV for the Bi0.90La0.10FeO3composition. Results revealed a noteworthy effect of the defect concentrations induced by the lanthanum doping on the long‐range crystallinity and directly affecting the polarizability of the A–O bond as well as the Fe–O and Fe–O–Fe bond lengths in the perovskite structure. The enhanced optical absorption properties registered for the Bi1–
x Lax FeO3(x = 0–20) compositions make these perovskite multiferroic thin films as a potential candidate material for the high‐performance photovoltaic device applications. -
more » « less
Abstract Phase separation in manganites leads to unique magnetic and electronic properties. 50% Ca‐doped LaMnO3(LCMO), at the boundary of ferromagnetic (FM) and antiferromagnetic (AFM) states in La1‐xCaxMnO3(0 ≤ x ≤ 1), is an ideal system to study phase separation behavior. The investigation reveals the effect of a 5
d ‐metal perovskite SrIrO3(SIO) on the phase separation, magnetic, and magnetoresistance (MR) properties of LCMO. Single‐layer and bilayer LCMO films, both appear purely ferromagnetic along the in‐plane (IP) magnetic field direction, but show the tendency of temperature‐dependent ferromagnetic and antiferromagnetic or charge‐ordered (CO) phase separation with the out‐of‐plane (OOP) applied field. The MR, and colossal magnetoresistance (CMR), observed in LCMO/SIO bilayers are two orders and an order of magnitude (in %) larger, respectively than that in the single‐layer film. The coexistence of FM and AFM/CO phases is responsible for the CMR and MR enhancement in the LCMO/SIO bilayer, pointing toward the importance of the phase separation and competition of both the individual materials in enhancing their magnetic and electronic properties.
