Imaging sub-diffraction dynamics of neural nanostructures involved in behaviors such as learning and memory in a freely moving animal is not possible with existing techniques. Here, we present a solution in the form of a two-photon (2P), fiber-coupled, stimulated emission depletion microscope and demonstrate its capabilities by acquiring super-resolution imaging of mammalian cells. A polarization-maintaining fiber is used to transport both the 2P excitation light (915 nm) and the donut-shaped depletion beam (592 nm), which is constructed by adding two temporally incoherent and orthogonally polarized Hermite–Gaussian fiber modes. The fiber output is insensitive to bending or temperature changes and is the first demonstration toward deep tissue super-resolution imaging in awake behaving animals.
more »
« less
A Fiber-Coupled Stimulated Emission Depletion Microscope for Bend-Insensitive Through-Fiber Imaging
We present results for a new type of fiber-coupled stimulated emission depletion (STED) microscope which uses a single fiber to transport STED and excitation light, as well as collect the fluorescence signal. Our method utilizes two higher-order eigenmodes of polarization maintaining (PM) fiber to generate the doughnut-shaped STED beam. The modes are excited with separate beams that share no temporal coherence, yielding output that is independent of fiber bending. We measured the resolution using 45 nm fluorescent beads and found a median bead image size of 116 nm. This resolution does not change as function of fiber bending radius, demonstrating robust operation. We report, for the first time, STED images of fixed biological samples collected in the epi-direction through fiber. Our microscope design shows promise for future use in super-resolution micro-endoscopes and
- NSF-PAR ID:
- 10153645
- Publisher / Repository:
- Nature Publishing Group
- Date Published:
- Journal Name:
- Scientific Reports
- Volume:
- 9
- Issue:
- 1
- ISSN:
- 2045-2322
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
more » « less
A single-cavity dual-wavelength all-fiber femtosecond laser is designed to generate 1030 nm wavelength for high resolution multiphoton imaging and 1700 nm wavelength for long penetration depth imaging. Considering two-photon and three-photon microscopy (2PM and 3PM), the proposed laser provides the single-photon wavelength equivalent to 343 nm, 515 nm, 566 nm and 850 nm, that can be employed to excite a wide variety of intrinsic fluorophores, dyes, and fluorescent proteins. Generating two excitation wavelengths from a single laser reduces the footprint and cost significantly compared to having two separate lasers. Furthermore, an all-reflective microscope is designed to eliminate the chromatic aberration while employing two excitation wavelengths. The compact all-fiber alignment-free laser design makes the overall size of the microscope appropriate for clinical applications.
-
more » « less
Depositing carbon nanotubes (CNTs) into carbon fiber reinforced polymer composites (CFRPs) is challenging because of the need for complicated lab-scale processes and toxic chemical dispersants that makes conventional means of processing less compatible with existing industrial procedures for large-scale applications. In this work, a scalable supercritical CO2-assisted atomization technique is used to effectively deposit hybrid CNTs in CFRPs allowing them to boost their functionality and tailor the microstructure. Cellulose nanocrystals (CNCs) are utilized to create hybrid nanostructures with CNTs (CNC bonded CNT) that enables stabilization of CNTs in nontoxic media, i.e., water, and this promotes the scalability of the process. According to Zeta potential values, CNCs successfully stabilize CNTs in water suspension. Scanning electron microscopy (SEM) micrographs show hybrid CNC bonded CNTs are homogeneously dispersed on the carbon fiber surface. According to the in-situ bending test under the optical microscope, crack propagation is hindered by engineered hybrid CNT nanostructures in the modified CFRP whereas neat CFRP exhibits low crack growth resistance due to the uninterrupted crack propagation in the continuous epoxy matrix. Our results imply that this strategy probes the importance of new controlled manufacturing of hybrid nanostructures through evaporation‑induced self‑assembly of nanocolloidal droplets, and allows for tailoring of the desired properties of nanostructured composites.
-
Fibrous shape memory polymers (SMPs) have received growing interest in various applications, especially in biomedical applications, which offer new structures at the microscopic level and the potential of enhanced shape deformation of SMPs. In this paper, we report on the development and investigation of the properties of acrylate-based shape memory polymer fibers, fabricated by electrospinning technology with the addition of polystyrene (PS). Fibers with different diameters are manufactured using four different PS solution concentrations (25, 30, 35, and 40 wt%) and three flow rates (1.0, 2.5, and 5.0 μL min −1 ) with a 25 kV applied voltage and 17 cm electrospinning distance. Scanning electron microscope (SEM) images reveal that the average fiber diameter varies with polymer concentration and flow rates, ranging from 0.655 ± 0.376 to 4.975 ± 1.634 μm. Dynamic mechanical analysis (DMA) and stress–strain testing present that the glass transition temperature and tensile values are affected by fiber diameter distribution. The cyclic bending test directly proves that the electrospun SMP fiber webs are able to fully recover; additionally, the recovery speed is also affected by fiber diameter. With the combination of the SMP material and electrospinning technology, this work paves the way in designing and optimizing future SMP fibers properties by adjusting the fiber diameter.more » « less
