The bulk-boundary correspondence (b-bc) principle states that the presence and number of
Separating specific cell phenotypes from a heterotypic mixture is a critical step in many research projects. Traditional methods usually require a large sample volume and a complex preparation process that may alter cell property during the sorting process. Here we present the use of electrical impedance as an indicator of cell health and for identifying specific microalgal phenotypes. We developed a microfluidic platform for measuring electrical impedance at different frequencies using the bacterium-sized green alga
- PAR ID:
- 10154043
- Publisher / Repository:
- Nature Publishing Group
- Date Published:
- Journal Name:
- Scientific Reports
- Volume:
- 10
- Issue:
- 1
- ISSN:
- 2045-2322
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
Abstract evanescent bandgap modes at an interface between two periodic media depend on the topological invariants (Chern numbers in 2D or Zak phases in 1D) ofpropagating modesat completely different frequencies in all Bloch bands below that bandgap. The objective of this letter is to explain, on physical grounds, this connection between modes with completely different characteristics. We assume periodic lossless 1D structures and lattice cells with mirror symmetry; in this case the Zak phase is unambiguously defined. The letter presents a systematic study of the behavior of electromagnetic Bloch impedance, defined as the ratio of electrical and magnetic fields in a Bloch wave at the boundary of a lattice cell. The impedance-centric view confers transparent physical meaning on the bulk-boundary correspondence principle. Borrowing from the semiconductor terminology, we classify the bandgaps asp - andn -type at the Γ andX points, depending on whether the Bloch impedance has a pole (p ) or a null (n ) at the bottom of that gap. An interface mode exists only forpn -junctions per our definition. We expect these ideas to be extendable to problems in higher dimensions, with a variety of emerging applications. -
more » « less
Abstract This article presents the development and testing of a low‐cost (<$60), portable, electrical impedance‐based microflow cytometer for single‐cell analysis under a controlled oxygen microenvironment. The system is based on an AD5933 impedance analyzer chip, a microfluidic chip, and an Arduino microcontroller operated by a custom Android application. A representative case study on human red blood cells (RBCs) affected by sickle cell disease is conducted to demonstrate the capability of the cytometry system. Impedance values of sickle blood samples exhibit remarkable deviations from the common reference line obtained from two normal blood samples. Such deviation is quantified by a conformity score, which allows for the measurement of intrapatient and interpatient variations of sickle cell disease. A low conformity score under oxygenated conditions or drastically different conformity scores between oxygenated and deoxygenated conditions can be used to differentiate a sickle blood sample from normal. Furthermore, an equivalent circuit model of a suspended biological cell is used to interpret the electrical impedance of single flowing RBCs. In response to hypoxia treatment, all samples, regardless of disease state, exhibit significant changes in at least one single‐cell electrical property, that is, cytoplasmic resistance and membrane capacitance. The overall response to hypoxia is less in normal cells than those affected by sickle cell disease, where the change in membrane capacitance varies from −23% to seven times as compared with −17% in normal cells. The results reported in this article suggest that the developed method of testing demonstrates the potential application for a low‐cost screening technique for sickle cell disease and other diseases in the field and low‐resource settings. The developed system and methodology can be extended to analyze cellular response to hypoxia in other cell types.
-
more » « less
Abstract Electrical scanning probe microscopies (SPM) use ultrasharp metallic tips to obtain nanometer spatial resolution and are a key tool for characterizing nanoscale semiconducting materials and systems. However, these tips are not passive probes; their high work functions can induce local band bending whose effects depend sensitively on the local geometry and material properties and thus are inherently difficult to quantify. We use sequential finite element simulations to first explore the magnitude and spatial distribution of charge reorganization due to tip-induced band bending (TIBB) for planar and nanostructured geometries. We demonstrate that tip-induced depletion and accumulation of carriers can be significantly modified in confined geometries such as nanowires compared to a bulk planar response. This charge reorganization is due to finite size effects that arise as the nanostructure size approaches the Debye length, with significant implications for a range of SPM techniques. We then use the reorganized charge distribution from our model to describe experimentally measured quantities, using
in operando scanning microwave impedance microscopy measurements on axial p-i-n silicon nanowire devices as a specific example. By incorporating TIBB, we reveal that our experimentally observed enhancement (absence) of contrast at the p-i (i-n) junction is explained by the tip-induced accumulation (depletion) of carriers at the interface. Our results demonstrate that the inclusion of TIBB is critical for an accurate interpretation of electrical SPM measurements, and is especially important for weakly screening or low-doped materials, as well as the complex doping patterns and confined geometries commonly encountered in nanoscale systems. -
more » « less
Abstract Flexible and stretchable electronics are a logical choice for the recording of biopotentials, due to their improved patient comfort and customizability. There is, however, significant variance in the signal quality received from these electrodes based on material, size, and target recording frequency. Here we develop a methodology based on Electrochemical Impedance Spectroscopy (EIS) and circuit modeling for optimizing electrodes for a specific application. We use EIS to measure the frequency dependent impedance characteristics of gold (Au) and silver/silver chloride (Ag/AgCl) electrodes of different diameters. Additionally, we use a Randles circuit model and perform model fitting with our data to extrapolate results to arbitrary frequencies and diameters. We found that at low frequencies (<1 Hz), Ag/AgCl had lower overall magnitude impedance than Au and at higher frequencies (1–1000 Hz), Au and Ag/AgCl performed similarly. Further, the magnitude impedance of the electrodes decreased linearly as electrode diameter increased. The methodology described in this study can be applicable to any customizable stretchable electronics fabrication process and enables design optimization for a target frequency, electrode size, and material.
-
more » « less
Abstract Background Noncanonical Wnts are morphogens that can elevate intracellular Ca2+, activate the Ca2+/calmodulin‐dependent protein kinase, CaMKII, and promote cell movements during vertebrate gastrulation.
Results Zebrafish express seven CaMKII genes during embryogenesis; two of these,
camk2b1 andcamk2g1 , are necessary for convergent extension (CE) cell movements. CaMKII morphant phenotypes were observed as early as epiboly. At the 1–3 somite stage, neuroectoderm and paraxial cells remained unconverged in both morphants. Later, somites lacked their stereotypical shape and were wider, more closely spaced, and body gap angles increased. At 24hpf, somite compression and notochord undulation coincided with a shorter and broader body axis. Acamk2b1 crispant was generated which phenocopied thecamk2b1 morphant. The levels of cell proliferation, apoptosis and paraxial and neuroectodermal markers were unchanged in morphants. Hyperactivation of CaMKII during gastrulation by transient pharmacological intervention (thapsigargin) also caused CE defects. Mosaically expressed dominant‐negative CaMKII recapitulated these phenotypes and showed significant midline bifurcation. Finally, the introduction of CaMKII partially rescued Wnt11 morphant phenotypes.Conclusions Overall, these data support a model whereby cyclically activated CaMKII encoded from two genes enables cell migration during the process of CE.
