We have designed and synthesized a series of deep‐blue light‐emitting polyfluorenes, PF‐27SOs and PF‐36SOs, by introducing electron‐deficient 9,9‐dimethyl‐9
The performance of conjugated polymer devices is largely dictated by charge transport processes. However, it is difficult to obtain a clear relationship between conjugated polymer structures and charge transport properties, due to the complexity of the structure and the dispersive nature of charge transport in conjugated polymers. Here, we develop a method to map the energy landscape for charge transport in conjugated polymers based on simultaneous, correlated charge carrier tracking and single-particle fluorescence spectroscopy. In nanoparticles of the conjugated polymer poly[9,9-dioctylfluorenyl-2,7-diyl)-
- NSF-PAR ID:
- 10154362
- Publisher / Repository:
- Nature Publishing Group
- Date Published:
- Journal Name:
- Nature Communications
- Volume:
- 9
- Issue:
- 1
- ISSN:
- 2041-1723
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
Abstract H ‐thioxanthene 10,10‐dioxide isomers (27SO and 36SO) into the poly(9,9‐dioctylfluorene) (PFO) backbone. Compared with PFO, the resulting polymers exhibit an equivalent thermal decomposition temperature (>415 °C), an enhanced glass transition temperature (>99 °C), a decreased lowest unoccupied molecular orbital energy level (E LUMO) below −2.32 eV, a blue‐shifted photoluminescence spectra in solid film with a maximum emission at ~422 nm, and a shoulder peak at ~445 nm. The resulting polymers also show blue‐shifted and narrowed electroluminescence spectra with deep‐blue Commission Internationale de L'Eclairage (CIE) coordinates of (0.16, 0.07) for PF‐27SO20 and (0.16, 0.06) for PF‐36SO30, compared with (0.17, 0.13) for PFO. Moreover, simple device based on PF‐36SO30 achieves a superior device performance with a maximum external quantum efficiency (EQEmax= 3.62%) compared with PFO (EQEmax= 0.47%). The results show that nonconjugated 9,9‐dimethyl‐9H ‐thioxanthene 10,10‐dioxide isomers can effectively perturb the conjugation length of polymers, significantly weaken the charge‐transfer effect in donor–acceptor systems, substantially improve electroluminescence device efficiency, and achieve deep‐blue light emission. -
more » « less
Abstract Mechanically deformable polymeric semiconductors are a key material for fabricating flexible organic thin‐film transistors (FOTFTs)—the building block of electronic circuits and wearable electronic devices. However, for many π‐conjugated polymers achieving mechanical deformability and efficient charge transport remains challenging. Here the effects of polymer backbone bending stiffness and film microstructure on mechanical flexibility and charge transport are investigated via experimental and computational methods for a series of electron‐transporting naphthalene diimide (NDI) polymers having differing extents of π‐conjugation. The results show that replacing increasing amounts of the π‐conjugated comonomer dithienylvinylene (TVT) with the π‐nonconjugated comonomer dithienylethane (TET) in the backbone of the fully π‐conjugated polymeric semiconductor, PNDI‐TVT100(yielding polymeric series PNDI‐TVT
x , 100 ≥x ≥ 0), lowers backbone rigidity, degree of texturing, and π–π stacking interactions between NDI moieties. Importantly, this comonomer substitution increases the mechanical robustness of PNDI‐TVTx while retaining efficient charge transport. Thus, reducing the TVT content of PNDI‐TVTx suppresses film crack formation and dramatically stabilizes the field‐effect electron mobility upon bending (e.g., 2 mm over 2000 bending cycles). This work provides a route to tune π–π stacking in π‐conjugated polymers while simultaneously promoting mechanical flexibility and retaining good carrier mobility in FOTFTs. -
more » « less
Abstract In order to apply polymer semiconductors to stretchable electronics, they need to be easily deformed under strain without being damaged. A small number of conjugated polymers, typically with semicrystalline packing structures, have been reported to exhibit mechanical stretchability. Herein, a method is reported to modify polymer semiconductor packing‐structure using a molecular additive, dioctyl phthalate (DOP), which is found to act as a molecular spacer, to be inserted between the amorphous chain networks and disrupt the crystalline packing. As a result, large‐crystal growth is suppressed while short‐range aggregations of conjugated polymers are promoted, which leads to an improved mechanical stretchability without affecting charge‐carrier transport. Due to the reduced conjugated polymer intermolecular interactions, strain‐induced chain alignment and crystallization are observed. By adding DOP to a well‐known conjugated polymer, poly[2,5‐bis(4‐decyltetradecyl)pyrrolo[3,4‐c]pyrrole‐1,4‐(2
H ,5H )‐dione‐(E)‐1,2‐di(2,2′‐bithiophen‐5‐yl)ethene] (DPPTVT), stretchable transistors are obtained with anisotropic charge‐carrier mobilities under strain, and stable current output under strain up to 100%. -
more » « less
Abstract Conjugated polymers need to be doped to increase charge carrier density and reach the electrical conductivity necessary for electronic and energy applications. While doping increases carrier density, Coulomb interactions between the dopant molecules and the localized carriers are poorly screened, causing broadening and a heavy tail in the electronic density‐of‐states (DOS). The authors examine the effects of dopant‐induced disorder on two complimentary charge transport properties of semiconducting polymers, the Seebeck coefficient and electrical conductivity, and demonstrate a way to mitigate them. Their simulations, based on a modified Gaussian disorder model with Miller‐Abrahams hopping rates, show that dopant‐induced broadening of the DOS negatively impacts the Seebeck coefficient versus electrical conductivity trade‐off curve. Increasing the dielectric permittivity of the polymer mitigates dopant‐carrier Coulomb interactions and improves charge transport, evidenced by simultaneous increases in conductivity and the Seebeck coefficient. They verified this increase experimentally in iodine‐doped P3HT and P3HT blended with barium titanate (BaTiO3) nanoparticles. The addition of 2% w/w BaTiO3nanoparticles increased conductivity and Seebeck across a broad range of doping, resulting in a fourfold increase in power factor. Thus, these results show a promising path forward to reduce the dopant‐charge carrier Coulomb interactions and mitigate their adverse impact on charge transport.
-
more » « less
Abstract High energy photons (λ < 400 nm) are frequently used to initiate free radical polymerizations to form polymer networks, but are only effective for transparent objects. This phenomenon poses a major challenge to additive manufacturing of particle‐reinforced composite networks since deep light penetration of short‐wavelength photons limits the homogeneous modification of physicochemical and mechanical properties. Herein, the unconventional, yet versatile, multiexciton process of triplet–triplet annihilation upconversion (TTA‐UC) is employed for curing opaque hydrogel composites created by direct‐ink‐write (DIW) 3D printing. TTA‐UC converts low energy red light (λmax = 660 nm) for deep penetration into higher‐energy blue light to initiate free radical polymerizations within opaque objects. As proof‐of‐principle, hydrogels containing up to 15 wt.% TiO2filler particles and doped with TTA‐UC chromophores are readily cured with red light, while composites without the chromophores and TiO2loadings as little as 1–2 wt.% remain uncured. Importantly, this method has wide potential to modify the chemical and mechanical properties of complex DIW 3D‐printed composite polymer networks.
