skip to main content


Title: Carboxylic Acid‐Functionalized Conjugated Polymer Promoting Diminished Electronic Drift and Amplified Proton Sensitivity of Remote Gates Compared to Nonpolar Surfaces in Aqueous Media
Abstract

A systematic analysis is used to understand electrical drift occurring in field‐effect transistor (FET) dissolved‐analyte sensors by investigating its dependence on electrode surface‐solution combinations in a remote‐gate (RG) FET configuration. Water at pH 7 and neat acetonitrile, having different dipoles and polarizabilities, are applied to the RG surface of indium tin oxide, SiO2, hexamethyldisilazane‐modified SiO2, polystyrene, poly(styrene‐co‐acrylic acid), poly(3‐hexylthiophene‐2,5‐diyl) (P3HT), and poly [3‐(3‐carboxypropyl)thiophene‐2,5‐diyl] (PT‐COOH). It is discovered that in some cases a slow reorientation of dipoles at the interface induced by gate electric fields causes severe drift and hysteresis because of induced interface potential changes. Conductive and charged P3HT and PT‐COOH increase electrochemical stability by promoting fast surface equilibrations. It is also demonstrated that pH sensitivity of P3HT (17 mV per pH) is an indication of proton doping. PT‐COOH shows further enhanced pH sensitivity (30 mV per pH). This combination of electrochemical stability and pH response in PT‐COOH are proposed as advantageous for polymer‐based biosensors.

 
more » « less
Award ID(s):
1807292 1728947
NSF-PAR ID:
10456888
Author(s) / Creator(s):
 ;  ;  ;  ;  
Publisher / Repository:
Wiley Blackwell (John Wiley & Sons)
Date Published:
Journal Name:
Advanced Electronic Materials
Volume:
6
Issue:
7
ISSN:
2199-160X
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Abstract

    The relationship between hole density and conductivity in electrochemically gated polythiophene films is examined. The films are  integrated into electrolyte‐gated transistors (EGTs), so that hole accumulations can be electrochemically modulated up to ≈0.4 holes per thiophene ring (hpr). Polythiophenes include poly(3‐alkylthiophenes) (P3ATs) with four different side chain lengths – butyl (P3BT), hexyl (P3HT), octyl (P3OT), or decyl (P3DT) – and poly[2,5‐bis(3‐dodecylthiophen‐2‐yl)thieno[3,2‐b]thiophene] (PBTTT) and poly(3,3′′′‐didodecyl[2,2′:5′,2′′:5′′,2′′′‐quaterthiophene]‐5,5′′′‐diyl) (PQT). Analysis of the drain current – gate voltage (IDVG) and gate current – gate voltage (IGVG) characteristics of the EGTs reveals that all six polythiophene semiconductors exhibited reversible conductivity peaks at 0.12 – 0.15 hpr. Conductivity is suppressed beyond ≈0.4 hpr.The maximum carrier mobilities of the P3AT semiconductors increase, and hysteresis of the conductivity peaks decreases, with increasing alkyl side‐chain length. PBTTT and PQT with reduced side chain densities exhibit the largest hysteresis but have higher hole mobilities. The results suggest that at ≈0.4 hpr, a polaronic sub‐band is filled in all cases. Filling of the sub‐band correlates with a collapse in the hole mobility. The side‐chain dependence of the peak conductivity and hysteresis further suggests that Coulombic ion‐carrier interactions are important in these systems. Tailoring ion‐carrier correlations is likely important for further improvements in transport properties of electrochemically doped polythiophenes.

     
    more » « less
  2. Abstract

    The sensing properties of poly 3‐(3‐carboxypropyl) thiophene‐2,5‐diyl (PT‐COOH) and hydroxylated polythiophene (PT‐OH) as bioreceptor layers were studied and are discussed in this paper. The polymer films cover the channel region of the OECT devices and anti‐human IgG was immobilized on the polymer films. We use threshold voltage (Vth) change as a sensing signal to detect the interaction between anti‐human IgG and human IgG. By adding different concentrations of human IgG, Vth difference can be observed on anti‐human IgG immobilized polymer films, with optimized detection from a blend of the two polymers. Open circuit potential (OCP) measurement was also done on the OECT devices based on the same anti‐human IgG and human IgG interaction pair to help us understand the mechanism behind the antibody functionalization and the interaction between antibody and antigen. Importantly, the observed positive OCP change for the PT‐OH system was self‐consistent with the negative OECT Vth change that was obtained, since the latter is applied to the gate while the former is measured at the channel.

     
    more » « less
  3. ABSTRACT

    Charge transport in conjugated polymers may be governed not only by the static microstructure but also fluctuations of backbone segments. Using molecular dynamics simulations, we predict the role of side chains in the backbone dynamics for regiorandom poly(3‐alkylthiophene‐2,5‐diyl)s (P3ATs). We show that the backbone of poly(3‐dodecylthiophene‐2‐5‐diyl) (P3DDT) moves faster than that of poly(3‐hexylthiophene‐2,5‐diyl) (P3HT) as a result of the faster motion of the longer side chains. To verify our predictions, we investigated the structures and dynamics of regiorandom P3ATs with neutron scattering and solid state NMR. Measurements of spin‐lattice relaxations (T1) using NMR support our prediction of faster motion for side chain atoms that are farther away from the backbone. Using small‐angle neutron scattering (SANS), we confirmed that regiorandom P3ATs are amorphous at about 300 K, although microphase separation between the side chains and backbones is apparent. Furthermore, quasi‐elastic neutron scattering (QENS) reveals that thiophene backbone motion is enhanced as the side chain length increases from hexyl to dodecyl. The faster motion of longer side chains leads to faster backbone dynamics, which in turn may affect charge transport for conjugated polymers. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys.2018,56, 1193–1202

     
    more » « less
  4. Abstract

    Semiconducting mesocrystalline bulk polymer specimens that exhibit near‐intrinsic properties using channel‐die pressing are demonstrated. A predominant edge‐on orientation is obtained for poly(3‐hexylthiophene‐2,5‐diyl) (P3HT) throughout 2 mm‐thick/wide samples. This persistent mesocrystalline arrangement at macroscopic scales allows reliable evaluation of the electronic charge‐transport anisotropy along all three crystallographic axes, with high mobilities found along the π‐stacking. Indeed, charge‐carrier mobilities of up to 2.3 cm2V−1s−1are measured along the π‐stack, which are some of the highest mobilities reported for polymers at low charge‐carrier densities (drop‐cast films display mobilities of maximum ≈10−3cm2V−1s−1). The structural coherence also leads to an unusually well‐defined photoluminescence line‐shape characteristic of an H‐aggregate (measured from the surface perpendicular to the materials flow), rather than the typical HJ‐aggregate feature usually found for P3HT. The approach is widely applicable: to electrical conductors and materials used in n‐type devices, such as poly{[N,N′‐bis(2‐octyldodecyl)‐naphthalene‐1,4,5,8‐bis(dicarboximide)‐2,6‐diyl]‐alt‐5,5′‐(2,2′‐bithiophene)} (N2200) where the mesocrystalline structure leads to high electron transport along the polymer backbones (≈1.3 cm2V−1s−1). This versatility and the broad applicability of channel‐die pressing signifies its promise as a straightforward, readily scalable method to fabricate bulk semiconducting polymer structures at macroscopic scales with properties typically accessible only by the tedious growth of single crystals.

     
    more » « less
  5. High performance polymer dielectrics are a key component for printed electronics. In this work, organo-soluble polymers of intrinsic microporosity (PIMs) are reported for the first time to demonstrate desirable dielectric properties with a high permittivity (or κ ), heat resistance, and low dielectric loss simultaneously. Due to the highly dipolar sulfonyl side groups (4.5 D) and rigid contorted polymer backbone, a sulfonylated PIM (SO 2 -PIM) enabled friction-free rotation of sulfonyl dipoles in the nanopores. As such, an optimal balance between relatively high κ and low dielectric loss is achieved in a broad temperature window (−50–200 °C). For example, the discharged energy density reached 17 J cm −3 with κ = 6.0. The discharge efficiency was 94% at 150 °C/300 MV m −1 and 88% at 200 °C/200 MV m −1 . Furthermore, its application as a high- κ gate dielectric in field effect transistors (FETs) is demonstrated. With the bilayer SO 2 -PIM/SiO 2 gate dielectric, InSe FETs exhibited a high electron mobility in the range of 200–400 cm 2 V −1 s −1 , as compared to 40 cm 2 V −1 s −1 for the bare SiO 2 -gated InSe FET. This study indicates that highly dipolar PIMs with a rigid polymer backbone and large free volume are promising as next generation gate dielectric materials for printed electronics. 
    more » « less