More Like this

1. Local Glass Transition Temperature T _g ( z ) Profile in Polystyrene next to Polybutadiene with and without Plasticization Effects

   https://doi.org/10.1002/macp.201700328  

   Kasavan, Benjamin L.; Baglay, Roman R.; Roth, Connie B. (November 2017, Macromolecular Chemistry and Physics)

   Abstract Rubber toughening of glassy polystyrene (PS) has been manufactured commercially for decades as high impact polystyrene, where rubbery poly‐butadiene (PB) inclusions are added to modify the PS matrix response to deformation and impact. In this study, measurements of the local glass transition temperatureT_g(z) of PS next to PB rubber are presented, expanding the previous data to a polymer with a much lowerT_gvalue (PBT_g^bulk= −96 °C). After accounting for a small molecule additive present in the commercial PB sample that would otherwise migrate over to the PS domain causing plasticization, it is found that theT_g(z) profile in PS next to PB is consistent with previous results. It is also demonstrated that these broad and asymmetric experimentally observedT_g(z) profiles are not caused by the migration of low molecular weight chains across the interface by comparing samples made with two different poly(n‐butyl methacrylate) molecular weights. 

   more » « less
2. Studies of Functional Defects for Fast Na‐Ion Conduction in Na _{3− y} PS _{4− x} Cl _x with a Combined Experimental and Computational Approach

   https://doi.org/10.1002/adfm.201807951  

   Feng, Xuyong; Chien, Po‐Hsiu; Zhu, Zhuoying; Chu, Iek‐Heng; Wang, Pengbo; Immediato‐Scuotto, Marcello; Arabzadeh, Hesam; Ong, Shyue_Ping; Hu, Yan‐Yan (January 2019, Advanced Functional Materials)

   Abstract All‐solid‐state rechargeable sodium (Na)‐ion batteries are promising for inexpensive and high‐energy‐density large‐scale energy storage. In this contribution, new Na solid electrolytes, Na_3−yPS_4−xCl_x, are synthesized with a strategic approach, which allows maximum substitution of Cl for S (x= 0.2) without significant compromise of structural integrity or Na deficiency. A maximum conductivity of 1.96 mS cm⁻¹at 25 °C is achieved for Na_3.0PS_3.8Cl_0.2, which is two orders of magnitude higher compared with that of tetragonal Na₃PS₄(t‐Na₃PS₄). The activation energy (E_a) is determined to be 0.19 eV. Ab initio molecular dynamics simulations shed light on the merit of maximizing Cl‐doping while maintaining low Na deficiency in enhanced Na‐ion conduction. Solid‐state nuclear magnetic resonance (NMR) characterizations confirm the successful substitution of Cl for S and the resulting change of P oxidation state from 5+ to 4+, which is also verified by spin moment analysis. Ion transport pathways are determined with a tracer‐exchange NMR method. The functional detects that promote Na ‐ion transport are maximized for further improvement in ionic conductivity. Full‐cell performance is demonstrated using Na/Na_3.0PS_3.8Cl_0.2/Na₃V₂(PO₄)₃with a reversible capacity of ≈100 mAh g^‐1at room temperature. 

   more » « less
3. General and Genomic DNA-Binding Specificity for the Thermus thermophilus HB8 Transcription Factor TTHB023

   https://doi.org/10.3390/biom10010094  

   Cox, James Shell; Van Dyke, Michael W. (January 2020, Biomolecules)

   Transcription factors are proteins that recognize specific DNA sequences and affect local transcriptional processes. They are the primary means by which all organisms control specific gene expression. Understanding which DNA sequences a particular transcription factor recognizes provides important clues into the set of genes that they regulate and, through this, their potential biological functions. Insights may be gained through homology searches and genetic means. However, these approaches can be misleading, especially when comparing distantly related organisms or in cases of complicated transcriptional regulation. In this work, we used a biochemistry-based approach to determine the spectrum of DNA sequences specifically bound by the Thermus thermophilus HB8 TetR-family transcription factor TTHB023. The consensus sequence 5′–(a/c)Y(g/t)A(A/C)YGryCR(g/t)T(c/a)R(g/t)–3′ was found to have a nanomolar binding affinity with TTHB023. Analyzing the T. thermophilus HB8 genome, several TTHB023 consensus binding sites were mapped to the promoters of genes involved in fatty acid biosynthesis. Notably, some of these were not identified previously through genetic approaches, ostensibly given their potential co-regulation by the Thermus thermophilus HB8 TetR-family transcriptional repressor TTHA0167. Our investigation provides additional evidence supporting the usefulness of a biochemistry-based approach for characterizing putative transcription factors, especially in the case of cooperative regulation. 

   more » « less
4. Identifying Catalytic Active Sites of Trimolybdenum Phosphide (Mo ₃ P) for Electrochemical Hydrogen Evolution

   https://doi.org/10.1002/aenm.201900516  

   Kondori, Alireza; Esmaeilirad, Mohammadreza; Baskin, Artem; Song, Boao; Wei, Jialiang; Chen, Wei; Segre, Carlo_U; Shahbazian‐Yassar, Reza; Prendergast, David; Asadi, Mohammad (May 2019, Advanced Energy Materials)

   Abstract Solid‐state electrocatalysis plays a crucial role in the development of renewable energy to reshape current and future energy needs. However, finding an inexpensive and highly active catalyst to replace precious metals remains a big challenge for this technology. Here, tri‐molybdenum phosphide (Mo₃P) is found as a promising nonprecious metal and earth‐abundant candidate with outstanding catalytic properties that can be used for electrocatalytic processes. The catalytic performance of Mo₃P nanoparticles is tested in the hydrogen evolution reaction (HER). The results indicate an onset potential of as low as 21 mV, H₂formation rate, and exchange current density of 214.7 µmol s⁻¹g⁻¹_cat(at only 100 mV overpotential) and 279.07 µA cm⁻², respectively, which are among the closest values yet observed to platinum. Combined atomic‐scale characterizations and computational studies confirm that high density of molybdenum (Mo) active sites at the surface with superior intrinsic electronic properties are mainly responsible for the remarkable HER performance. The density functional theory calculation results also confirm that the exceptional performance of Mo₃P is due to neutral Gibbs free energy (ΔG_H*) of the hydrogen (H) adsorption at above 1/2 monolayer (ML) coverage of the (110) surface, exceeding the performance of existing non‐noble metal catalysts for HER. 

   more » « less
5. Surface molecular engineering to enable processing of sulfide solid electrolytes in humid ambient air

   https://doi.org/10.1038/s41467-024-55634-8  

   Liu, Mengchen; Hong, Jessica J; Sebti, Elias; Zhou, Ke; Wang, Shen; Feng, Shijie; Pennebaker, Tyler; Hui, Zeyu; Miao, Qiushi; Lu, Ershuang; et al (December 2025, Nature Communications)

   Abstract Sulfide solid-state electrolytes (SSEs) are promising candidates to realize all solid-state batteries (ASSBs) due to their superior ionic conductivity and excellent ductility. However, their hypersensitivity to moisture requires processing environments that are not compatible with today’s lithium-ion battery manufacturing infrastructure. Herein, we present a reversible surface modification strategy that enables the processability of sulfide SSEs (e. g., Li₆PS₅Cl) under humid ambient air. We demonstrate that a long chain alkyl thiol, 1-undecanethiol, is chemically compatible with the electrolyte with negligible impact on its ion conductivity. Importantly, the thiol modification extends the amount of time that the sulfide SSE can be exposed to air with 33% relative humidity (33% RH) with limited degradation of its structure while retaining a conductivity of above 1 mS cm^-1for up to 2 days, a more than 100-fold improvement in protection time over competing approaches. Experimental and computational results reveal that the thiol group anchors to the SSE surface, while the hydrophobic hydrocarbon tail provides protection by repelling water. The modified Li₆PS₅Cl SSE maintains its function after exposure to ambient humidity when implemented in a Li_0.5In | |LiNi_0.8Co_0.1Mn_0.1O₂ASSB. The proposed protection strategy based on surface molecular interactions represents a major step forward towards cost-competitive and energy-efficient sulfide SSE manufacturing for ASSB applications. 

   more » « less