The heterogeneous integration of silicon with III-V materials provides a way to overcome silicon’s limited optical properties toward a broad range of photonic applications. Hybrid modes are a promising way to integrate such heterogeneous Si/III-V devices, but it remains unclear how to utilize these modes to achieve photonic crystal cavities. Herein, using 3D finite-difference time-domain simulations, we propose a hybrid Si-GaAs photonic crystal cavity design that operates at telecom wavelengths and can be fabricated without requiring careful alignment. The hybrid cavity consists of a patterned silicon waveguide that is coupled to a wider GaAs slab featuring InAs quantum dots. We show that by changing the width of the silicon cavity waveguide, we can engineer the hybrid modes and control the degree of coupling to the active material in the GaAs slab. This provides the ability to tune the cavity quality factor while balancing the device’s optical gain and nonlinearity. With this design, we demonstrate cavity mode confinement in the GaAs slab without directly patterning it, enabling strong interaction with the embedded quantum dots for applications such as low-power-threshold lasing and optical bistability (156 nW and 18.1
Integration of active electronics into photonic systems is necessary for large-scale photonic integration. While heterogeneous integration leverages high-performance electronics, a monolithic scheme can coexist by aiding the electronic processing, improving overall efficiency. We report a lateral bipolar junction transistor on a commercial silicon photonics foundry process. We achieved a DC current gain of 10 with a Darlington configuration, and using measured S-parameters for a single BJT, the available AC gain was at least 3dB for signal frequencies up to 1.1 GHz. Our single BJT demonstrated a transimpedance of 3.2mS/
- NSF-PAR ID:
- 10160564
- Publisher / Repository:
- Optical Society of America
- Date Published:
- Journal Name:
- Optics Express
- Volume:
- 28
- Issue:
- 8
- ISSN:
- 1094-4087; OPEXFF
- Page Range / eLocation ID:
- Article No. 11692
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
µ W, respectively). This heterogeneous integration of an active III-V material with silicon via a hybrid cavity design suggests a promising approach for achieving on-chip light generation and low-power nonlinear platforms. -
more » « less
Silicon is a common material for photonics due to its favorable optical properties in the telecom and mid-wave IR bands, as well as compatibility with a wide range of complementary metal–oxide semiconductor (CMOS) foundry processes. Crystalline inversion symmetry precludes silicon from natively exhibiting second-order nonlinear optical processes. In this work, we build on recent works in silicon photonics that break this material symmetry using large bias fields, thereby enabling
χ (2)interactions. Using this approach, we demonstrate both second-harmonic generation (with a normalized efficiency of 0.20%W−1cm−2) and, to our knowledge, the first degenerateχ (2)optical parametric amplifier (with an estimated normalized gain of 0.6dBW−1/2cm−1) using silicon-on-insulator waveguides fabricated in a CMOS-compatible commercial foundry. We expect this technology to enable the integration of novel nonlinear optical devices such as optical parametric amplifiers, oscillators, and frequency converters into large-scale, hybrid photonic–electronic systems by leveraging the extensive ecosystem of CMOS fabrication. -
more » « less
Titanium nitride (TiN) is highly attractive for plasmonics and nanophotonics applications owing to its gold‐like but tunable optical properties. Its prodigious potential for plasmonics has been demonstrated on sapphire or bulk MgO. For a transformational impact, high optical quality TiN on Si is required instead, which would support the integration of nanophotonics with the complementary metal‐oxide‐semiconductor (CMOS) electronics. However, TiN grown on Si, even at elevated temperatures, lacks the optical quality needed, imposed by the large lattice mismatch between them. Here, a novel approach is reported wherein a thin MgO interlayer is inserted between TiN and Si. The improved crystalline quality enabled by MgO for TiN on Si(001) leads to a significant enhancement of the plasmonic figure of merit (FOM = −
ε ′/ε ″) from 2.0 to 2.5 at telecommunication wavelength (peak FOM of 2.8), which is comparable to the widely accepted ultimate FOM obtained on bulk MgO grown under similar conditions. The TiN/MgO/Si structure enables the hybrid‐plasmonic‐photonic waveguide platform with sufficiently low losses, and thus long propagation lengths, for nanophotonic devices while providing additional practical advantages such as serving as a self‐aligned robust etching mask. Thus, the much‐anticipated potential of TiN on Si platform for CMOS compatible plasmonics is brought closer to reality. -
more » « less
Abstract Graphene (Gr) has many unique properties including gapless band structure, ultrafast carrier dynamics, high carrier mobility, and flexibility, making it appealing for ultrafast, broadband, and flexible optoelectronics. To overcome its intrinsic limit of low absorption, hybrid structures are exploited to improve the device performance. Particularly, van der Waals heterostructures with different photosensitive materials and photonic structures are very effective for improving photodetection and modulation efficiency. With such hybrid structures, Gr hybrid photodetectors can operate from ultraviolet to terahertz, with significantly improved
R (up to 109A W−1) and bandwidth (up to 128 GHz). Furthermore, integration of Gr with silicon (Si) complementary metal‐oxide‐semiconductor (CMOS) circuits, the human body, and soft tissues is successfully demonstrated, opening promising opportunities for wearable sensors and biomedical electronics. Here, the recent progress in using Gr hybrid structures toward high‐performance photodetectors and integrated optoelectronic applications is reviewed. -
more » « less
Abstract A general transfer method is presented for the heterogeneous integration of different photonic and electronic materials systems and devices into a single substrate. Called BLAST, for Bond, Lift, Align, and Slide Transfer, the process works at wafer scale and offers precision alignment, high yield, varying topographies, and suitability for subsequent lithographic processing. BLAST's capabilities is demonstrated by integrating both GaAs and GaN µLEDs with silicon photovoltaics to fabricate optical wireless integrated circuits that up‐convert photons from the red to the blue. The study also shows that BLAST can be applied to a variety of other devices and substrates, including CMOS electronics, vertical cavity surface emitting lasers (VCSELs), and 2D materials. BLAST further enables the modularization of optoelectronic microsystems, where optical devices fabricated on one material substrate can be lithographically integrated with electronic devices on a different substrate in a scalable process.
