Lithium‐ion batteries have remained a state‐of‐the‐art electrochemical energy storage technology for decades now, but their energy densities are limited by electrode materials and conventional liquid electrolytes can pose significant safety concerns. Lithium metal batteries featuring Li metal anodes, solid polymer electrolytes, and high‐voltage cathodes represent promising candidates for next‐generation devices exhibiting improved power and safety, but such solid polymer electrolytes generally do not exhibit the required excellent electrochemical properties and thermal stability in tandem. Here, an interpenetrating network polymer with weakly coordinating anion nodes that functions as a high‐performing single‐ion conducting electrolyte in the presence of minimal plasticizer, with a wide electrochemical stability window, a high room‐temperature conductivity of 1.5 × 10−4S cm−1, and exceptional selectivity for Li‐ion conduction (
Developing intelligent wearable energy storage devices that can endure harsh conditions is of interest for emerging applications in next‐generation electronics. Despite recent success in exploring functional materials for sophisticated self‐adaptivity in energy storage devices, it remains challenging to obtain both high reliability and superior performance. Herein, a novel method for fabricating micropatterned wearable thermoresponsive supercapacitors via direct ink writing (DIW) technique is reported. Thermal runaway of typical electrochemical storage devices with high power delivery capability can cause serious safety problems. The proposed temperature‐dependent structure works as self‐protection against the common thermal runaway issues of electrochemical energy storage devices. Such construction provides an automatic adjustment as high as 8 F g−1in specific capacitance, resulting in an overall heat reduction by up to 40%. The printing resolution of the electrodes (175 µm) is among the best in recently reported planar carbon‐based energy storage devices by DIW technique. Manufacturing‐related parameters such as time‐dependent printing speed and curing temperature are also investigated to fabricate this integrated design with varied materials and accuracy. This strategy shows tremendous promise for future intelligent energy storage devices.
more » « less- NSF-PAR ID:
- 10459578
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Advanced Materials Technologies
- Volume:
- 4
- Issue:
- 12
- ISSN:
- 2365-709X
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
Abstract t Li+= 0.95) is reported. Importantly, this material is also flame retardant and highly stable in contact with lithium metal. Significantly, a lithium metal battery prototype containing this quasi‐solid electrolyte is shown to outperform a conventional battery featuring a polymer electrolyte. -
more » « less
Abstract Aramid nanofibers (ANFs) are a strong and heat‐resistant nanomaterial that can be isolated from commercial para‐aramid fibers, which allow a bottom‐up self‐assembly to form ordered macroscale structures like ANF films. However, the anisotropic nature of high aspect ratio ANFs is not fully exploited when fabricating ANF films for the optimal mechanical properties. In this research, direct ink writing (DIW) is applied to produce ANF‐assembled films with arbitrary shapes, and the shear‐induced alignment of ANFs can follow the printing path direction. Therefore, controlled alignment of ANFs following the computer‐programmed printing pattern is achieved by DIW, which provides a path for the application of topology and nanofiber alignment optimization in nanofiber‐assembled films. In addition, the resulting DIW ANF films exhibit outstanding Young's modulus of 8.39 GPa, tensile strength of 198 MPa, and tensile toughness of 19.4 MJ m−3in the alignment direction, together with a wide working temperature range up to 440 °C without losing 50% of its room temperature storage modulus. Moreover, the demonstrated self‐joining ability, rollability, and lamination processability of the DIW ANF films expand their potential applications toward high‐temperature ultrathin tubes, substrates for flexible printed circuit boards, and three‐dimensional all‐ANF lightweight structural parts in extreme environments.
-
more » « less
Abstract Stretchable supercapacitors (SCs) have attracted significant attention in developing power‐independent stretchable electronic systems due to their intrinsic energy storage function and unique mechanical properties. Most current SCs are generally limited by their low stretchability, complicated fabrication process, and insufficient performance and robustness. This study presents a facile method to fabricate arbitrary‐shaped stretchable electrodes via 4D printing of conductive composite from reduced graphene oxide, carbon nanotube, and poly(3,4‐ethylenedioxythiophene) polystyrene sulfonate. The electrode patterns of an arbitrary shape can be deposited onto prestretched substrates by aerosol‐jet printing, then self‐organized origami (ridge) patterns are generated after releasing the substrates from holding stretchers due to the mismatched strains. The stretchable electrodes demonstrate superior mechanical robustness and stretchability without sacrificing its outstanding electrochemical performance. The symmetric SC prototype possesses a gravimetric capacitance of ≈21.7 F g−1at a current density of 0.5 A g−1and a capacitance retention of ≈85.8% from 0.5 to 5 A g−1. A SC array with arbitrary‐shaped electrodes is also fabricated and connected in series to power light‐emitting diode patterns for large‐scale applications. The proposed method paves avenues for scalable manufacturing of future energy‐storage devices with controlled extensibility and high electrochemical performance.
-
more » « less
Abstract Thermo‐responsive polymers have been widely explored because of their diverse structures and functions in response to temperature stimuli. Great attention has been attracted to exploring and designing such polymers composites, which offer tremendous opportunities to build up a systematic understanding of their structure–function relationships and pave the ways for their extensive applications in electronics, soft robotics, and electrochemical energy storage devices. Here, we review the most recent research of thermal regulation in electrochemical energy storage devices (e.g., batteries, supercapacitors) via thermo‐responsive polymers. We summarize how battery components (i.e., electrolytes, separators, electrodes, or current collectors) can be coupled with thermo‐responsive polymers based on different operation mechanisms, such as volume expansion, polymerization, phase reversion, and de‐doping effects, to effectively prevent catastrophic thermal runaway. Different types of thermo‐responsive polymers are evaluated to compare their key features and/or limitations. This review is concluded with perspectives of future design strategies towards more effective thermo‐responsive polymers for battery thermal regulation.
-
more » « less
Abstract Nanostructured conductive polymer hydrogels (CPHs) have been extensively applied in energy storage owing to their advantageous features, such as excellent electrochemical activity and relatively high electrical conductivity, yet the fabrication of self‐standing and flexible electrode‐based CPHs is still hampered by their limited mechanical properties. Herein, macromolecularly interconnected 3D graphene/nanostructured CPH is synthesized via self‐assembly of CPHs and graphene oxide macrostructures. The 3D hybrid hydrogel shows uniform interconnectivity and enhanced mechanical properties due to the strong macromolecular interaction between the CPHs and graphene, thus greatly reducing aggregation in the fiber‐shaping process. A proof‐of‐concept all‐gel‐state fibrous supercapacitor based on the 3D polyaniline/graphene hydrogel is fabricated to demonstrate the outstanding flexibility and mouldability, as well as superior electrochemical properties enabled by this 3D hybrid hydrogel design. The proposed device can achieve a large strain (up to ≈40%), and deliver a remarkable volumetric energy density of 8.80 mWh cm−3(at power density of 30.77 mW cm−3), outperforming many fiber‐shaped supercapacitors reported previously. The all‐hydrogel design opens up opportunities in the fabrication of next‐generation wearable and portable electronics.
