Donor polymer fluorination has proven to be an effective method to improve the power conversion efficiency of fullerene-based polymer solar cells (PSCs). However, this fluorine effect has not been well-studied in systems containing new, non-fullerene acceptors (NFAs). Here, we investigate the impact of donor polymer fluorination in NFA-based solar cells by fabricating devices with either a fluorinated conjugated polymer (FTAZ) or its non-fluorinated counterpart (HTAZ) as the donor polymer and a small molecule NFA (ITIC) as the acceptor. We found that, similar to fullerene-based devices, fluorination leads to an increased open circuit voltage ( V oc ) from the lowered HOMO level and improved fill factor (FF) from the higher charge carrier mobility. More importantly, donor polymer fluorination in this NFA-based system also led to a large increase in short circuit current ( J sc ), which stems from the improved charge transport and extraction in the fluorinated device. This study demonstrates that fluorination is also advantageous in NFA-based PSCs and may improve performance to a higher extent than in fullerene-based PSCs. In the context of other recent reports on demonstrating higher photovoltaic device efficiencies with fluorinated materials, fluorination appears to be a valuable strategy in the design and synthesis of future donors and acceptors for PSCs.
more »
« less
Alkyl Chain Length Effects of Polymer Donors on the Morphology and Device Performance of Polymer Solar Cells with Different Acceptors
The development of nonfullerene acceptors has brought polymer solar cells into a new era. Maximizing the performance of nonfullerene solar cells needs appropriate polymer donors that match with the acceptors in both electrical and morphological properties. So far, the design rationales for polymer donors are mainly borrowed from fullerene‐based solar cells, which are not necessarily applicable to nonfullerene solar cells. In this work, the influence of side chain length of polymer donors based on a set of random terpolymers PTAZ‐TPD10‐C
- Award ID(s):
- 1757220
- NSF-PAR ID:
- 10460511
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Advanced Energy Materials
- Volume:
- 9
- Issue:
- 30
- ISSN:
- 1614-6832
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Two polymer donors, FTAZ and J71 , and two fused-ring electron acceptors, ITIC1 and ITIC2 , are used to investigate the effects of conjugation dimension on the performance of organic solar cells (OSCs). FTAZ and J71 , and ITIC1 and ITIC2 share the same molecular backbone, respectively, while J71 and ITIC2 possess conjugated thienyl side chains. The addition of conjugated side chains slightly red-shifts the absorption spectra and lowers the bandgap due to the extended 2D conjugation. Conjugated side chains on the acceptor induce the self-aggregation of the acceptors, while conjugated side chains on the donor increase the miscibility of the donors and acceptors, thus optimizing the morphology of the active layers. The blends based on mixed combinations, namely 1D donor/2D acceptor and 2D donor/1D acceptor, show better performance relative to 1D donor/1D acceptor and 2D donor/2D acceptor.more » « less
-
more » « less
Abstract Understanding the correlation between polymer aggregation, miscibility, and device performance is important to establish a set of chemistry design rules for donor polymers with nonfullerene acceptors (NFAs). Employing a donor polymer with strong temperature‐dependent aggregation, namely PffBT4T‐2OD [poly[(5,6‐difluoro‐2,1,3‐benzothiadiazol‐4,7‐diyl)‐
alt ‐(3,3″′‐di(2‐octyldodecyl)‐2,2′;5′,2″;5″,2″′‐quaterthiophen‐5,5‐diyl)], also known as PCE‐11 as a base polymer, five copolymer derivatives having a different thiophene linker composition are blended with the common NFA O‐IDTBR to investigate their photovoltaic performance. While the donor polymers have similar optoelectronic properties, it is found that the device power conversion efficiency changes drastically from 1.8% to 8.7% as a function of thiophene content in the donor polymer. Results of structural characterization show that polymer aggregation and miscibility with O‐IDTBR are a strong function of the chemical composition, leading to different donor–acceptor blend morphology. Polymers having a strong tendency to aggregate are found to undergo fast aggregation prior to liquid–liquid phase separation and have a higher miscibility with NFA. These properties result in smaller mixed donor–acceptor domains, stronger PL quenching, and more efficient exciton dissociation in the resulting cells. This work indicates the importance of both polymer aggregation and donor–acceptor interaction on the formation of bulk heterojunctions in polymer:NFA blends. -
more » « less
Abstract Relative to electron donors for bulk heterojunction organic solar cells (OSCs), electron acceptors that absorb strongly in the visible and even near‐infrared region are less well developed, which hinders the further development of OSCs. Fullerenes as traditional electron acceptors have relatively weak visible absorption and limited electronic tunability, which constrains the optical and electronic properties required of the donor. Here, high‐performance fullerene‐free OSCs based on a combination of a medium‐bandgap polymer donor (FTAZ) and a narrow‐bandgap nonfullerene acceptor (IDIC), which exhibit complementary absorption, matched energy levels, and blend with pure phases on the exciton diffusion length scale, are reported. The single‐junction OSCs based on the FTAZ:IDIC blend exhibit power conversion efficiencies up to 12.5% with a certified value of 12.14%. Transient absorption spectroscopy reveals that exciting either the donor or the acceptor component efficiently generates mobile charges, which do not suffer from recombination to triplet states. Balancing photocurrent generation between the donor and nonfullerene acceptor removes undesirable constraints on the donor imposed by fullerene derivatives, opening a new avenue toward even higher efficiency for OSCs.
-
more » « less
Organic solar cells that are transparent to visible light are highly desirable for applications such as window treatments or solar greenhouse panels. A key challenge is to simultaneously transmit most photons between 400 and 700 nm while retaining a high short‐circuit current and power conversion efficiency (PCE). Here, organic bulk heterojunction (BHJ) solar cells consisting of a donor polymer (PM2) is reported and the non‐fullerene acceptor ITIC‐Th achieves a PCE of 9.3%, and the BHJ thin films exhibit an average visible transmittance over 40%. This value is achieved primarily due to a very high open‐circuit voltage (
V OC) of 0.93 V, which represents a voltage loss of only 0.50 V relative to the material optical bandgap,E opt. In PM2:PC61BM devices, this voltage loss increases to 0.62 V (V OC = 0.82 V). It is found that this difference inV OCis due to higher nonradiative recombination in the fullerene‐based solar cell, suggesting that non‐fullerene acceptors may lead to better performance in semi‐transparent devices. The optoelectronic properties associated with PM2:ITIC‐Th and PM2:PC61BM blends are further corroborated by different morphological features and local structures at the donor‐acceptor interfaces characterized by atomic force microscopy, X‐ray scattering, and solid‐state NMR spectroscopy techniques.
