skip to main content


Title: An 88-milligram insect-scale autonomous crawling robot driven by a catalytic artificial muscle

The creation of autonomous subgram microrobots capable of complex behaviors remains a grand challenge in robotics largely due to the lack of microactuators with high work densities and capable of using power sources with specific energies comparable to that of animal fat (38 megajoules per kilogram). Presently, the vast majority of microrobots are driven by electrically powered actuators; consequently, because of the low specific energies of batteries at small scales (below 1.8 megajoules per kilogram), almost all the subgram mobile robots capable of sustained operation remain tethered to external power sources through cables or electromagnetic fields. Here, we present RoBeetle, an 88-milligram insect-sized autonomous crawling robot powered by the catalytic combustion of methanol, a fuel with high specific energy (20 megajoules per kilogram). The design and physical realization of RoBeetle is the result of combining the notion of controllable NiTi-Pt–based catalytic artificial micromuscle with that of integrated millimeter-scale mechanical control mechanism (MCM). Through tethered experiments on several robotic prototypes and system characterization of the thermomechanical properties of their driving artificial muscles, we obtained the design parameters for the MCM that enabled RoBeetle to achieve autonomous crawling. To evaluate the functionality and performance of the robot, we conducted a series of locomotion tests: crawling under two different atmospheric conditions and on surfaces with different levels of roughness, climbing of inclines with different slopes, transportation of payloads, and outdoor locomotion.

 
more » « less
NSF-PAR ID:
10185100
Author(s) / Creator(s):
 ;  ;  
Publisher / Repository:
American Association for the Advancement of Science (AAAS)
Date Published:
Journal Name:
Science Robotics
Volume:
5
Issue:
45
ISSN:
2470-9476
Page Range / eLocation ID:
Article No. eaba0015
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Abstract

    Matching the rich multimodality of natural organisms, i.e., the ability to transition between crawling and swimming, walking and jumping, etc., represents a grand challenge in the fields of soft and bio‐inspired robotics. Here, a multimodal soft robot locomotion using highly compact and dynamic bistable soft actuators is achieved. These actuators are composed of a prestretched membrane sandwiched between two 3D printed frames with embedded shape memory alloy (SMA) coils. The actuator can swiftly transform between two oppositely curved states and generate a force of 0.3 N through a snap‐through instability that is triggered after 0.2 s of electrical activation with an input power of 21.1 ± 0.32W(i.e., electrical energy input of 4.22 ± 0.06J. The consistency and robustness of the snap‐through actuator response is experimentally validated through cyclical testing (580 cycles). The compact and fast‐responding properties of the soft bistable actuator allow it to be used as an artificial muscle for shape‐reconfigurable soft robots capable of multiple modes of SMA‐powered locomotion. This is demonstrated by creating three soft robots, including a reconfigurable amphibious robot that can walk on land and swim in water, a jumping robot (multimodal crawler) that can crawl and jump, and a caterpillar‐inspired rolling robot that can crawl and roll.

     
    more » « less
  2. Abstract Inspired by creatures that have naturally mastered locomotion on the air–water interface, we developed and built a self-powered, remotely controlled surfing robot capable of traversing this boundary by harnessing surface tension modification for both propulsion and steering through a controlled release of isopropyl alcohol. In this process, we devised and implemented novel release valve and steering mechanisms culminating in a surfer with distinct capabilities. Our robot measures about 110 mm in length and can travel as fast as 0.8 body length per second. Interestingly, we found that the linear speed of the robot follows a 1/3 power law with the release rate of the propellant. Additional maneuverability tests also revealed that the robot is able to withstand 20 mm s −2 in centripetal acceleration while turning. Here, we thoroughly discuss the design, development, performance, overall capabilities, and ultimate limitations of our robotic surfer. 
    more » « less
  3. Fibers capable of generating axial contraction are commonly seen in nature and engineering applications. Despite the broad applications of fiber actuators, it is still very challenging to fabricate fiber actuators with combined large actuation strain, fast response speed, and high power density. Here, we report the fabrication of a liquid crystal elastomer (LCE) microfiber actuators using a facile electrospinning technique. Owing to the extremely small size of the LCE microfibers, they can generate large actuation strain (~60 percent) with a fast response speed (<0.2 second) and a high power density (400 watts per kilogram), resulting from the nematic-isotropic phase transition of liquid crystal mesogens. Moreover, no performance degradation is detected in the LCE microfibers after 106cycles of loading and unloading with the maximum strain of 20 percent at high temperature (90 degree Celsius). The small diameter of the LCE microfiber also results in a self-oscillatory behavior in a steady temperature field. In addition, with a polydopamine coating layer, the actuation of the electrospun LCE microfiber can be precisely and remotely controlled by a near-infrared laser through photothermal effect. Using the electrospun LCE microfiber actuator, we have successfully constructed a microtweezer, a microrobot, and a light-powered microfluidic pump.

     
    more » « less
  4. Abstract

    Developing small‐scale, lightweight, and flexible devices with integrated microactuators is one of the critical challenges in wearable haptic devices, soft robotics, and microrobotics. In this study, a novel fabrication process that leverages the benefits of 3D printing with two‐photon polymerization and flexible printed circuit boards (FPCBs) is presented. This method enables flexible microsystems with 3D‐printed electrostatic microactuators, which are demonstrated in a flexible integrated micromirror array and a legged microrobot with a mass of 4 mg. 3D electrostatic actuators on FPCBs are robust enough to actuate the micromirrors while the device is deformed, and they are easily integrated with off‐the‐shelf electronics. The crawling robot is one of the lightest legged microrobots actuated without external fields, and the legs actuated with 3D electrostatic actuators enable a locomotion speed of 0.27 body length per second. The proposed fabrication framework opens up a pathway toward a variety of highly integrated flexible microsystems.

     
    more » « less
  5. The agile and power-efficient locomotion of a water strider has inspired many water-walking devices. These bioinspired water strider robots generally adopt a DC motor to create a sculling trajectory of the driving leg. These robots are, thus, inevitably heavy with many supporting legs decreasing the velocity of the robots. There have only been a few attempts to employ smart materials despite their advantages of being lightweight and having high power densities. This paper proposes an artificial muscle-based water-walking robot capable of moving forward and turning with four degrees of freedom. A compliant amplified shape memory alloy actuator (CASA) used to amplify the strain of a shape memory alloy wire enables a wide sculling motion of the actuation leg with only four supporting legs to support the entire weight of the robot. Design parameters to increase the actuation strain of the actuator and to achieve a desired swing angle (80°) are analyzed. Finally, experiments to measure the forward speed and angular velocities of the robot are carried out to compare with other robots. The robot weighs only 0.236 g and has a maximum and average speed of 1.56, 0.31 body length per second and a maximum and average angular velocity of 145.05°/s and 14.72°/s. 
    more » « less