An official website of the United States government
We present a theoretical study on the energy dispersion of an ultrathin film of periodically-aligned single-walled carbon nanotubes (SWCNTs) with the help of the Bogoliubov–Valatin transformation. The Hamiltonian of the film was derived using the many-particle green function technique in the Matsubara frequency formalism. The periodic array of SWCNTs was embedded in a dielectric with comparatively higher permittivity than the substrate and the superstrate such that the SWCNT film became independent with the axis of quantization but keeps the thickness as the variable parameter, making the film neither two-dimensional nor three-dimensional, but transdimensional. It was revealed that the energy dispersion of the SWCNT film is thickness dependent.
more »
« less
Optical response of ultrathin periodically aligned single-wall carbon nanotube films
We present a semi-analytical expression for the dielectric response function of quasi-2D ultrathin films of periodically aligned single-walled carbon nanotubes. We derive the response function in terms of the individual nanotube conductivity, plasma frequency, and the volume fraction of carbon nanotubes in the film. The real part of the dielectric response function is negative for a sufficiently wide range of the incident photon energy, indicating that the film behaves as a hyperbolic metamaterial. Inhomogeneous broadening increases the effect.
more »
« less
- Award ID(s):
- 1830874
- PAR ID:
- 10188891
- Date Published:
- Journal Name:
- MRS advances
- ISSN:
- 2059-8521
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Heat transport in nanoscale carbon materials such as carbon nanotubes and graphene is normally dominated by phonons. Here, measurements of in‐plane thermal conductivity, electrical conductivity, and thermopower are presented from 77–350 K on two films with thickness <100 nm formed from semiconducting single‐walled carbon nanotubes. These measurements are made with silicon–nitride membrane thermal isolation platforms. The two films, formed from disordered networks of tubes with differing tube and bundle size, have very different thermal conductivity. One film matches a simple model of heat conduction assuming constant phonon velocity and mean free path, and 3D Debye heat capacity with a Debye temperature of 770 K. The second film shows a more complicated temperature dependence, with a dramatic drop in a relatively narrow window near 200 K where phonon contributions to thermal conductivity essentially vanish. This causes a corresponding large increase in thermoelectric figure‐of‐merit at the same temperature. A better understanding of this behavior can allow significant improvement in thermoelectric efficiency of these low‐cost earth‐abundant, organic electronic materials. Heat and charge conductivity near room temperature is also presented as a function of doping, which provides further information on the interaction of dopant molecules and phonon transport in disordered nanotube films.more » « less
-
A supercapacitor requires two electronic conductors with large surface areas, separated by an ionic conductor. Here we demonstrate a method to print a highly stretchable supercapacitor. We formulate an ink by mixing graphene flakes and carbon nanotubes with an organic solvent, and use the ink to print two interdigitated electronic conductors on the surface of a dielectric elastomer. We then submerge the printed electronic conductors in an aqueous solution of monomer, photoinitiator, crosslinker, and salt. The organic solvent and water form a binary solvent in which the ions are mobile. Upon UV irradiation, a polymer network forms. In each printed electrode, the graphene flakes and carbon nanotubes form a percolating network, which interpenetrates the polymer network. The electronic and ionic conductors form large interfacial areas. When the supercapacitor is stretched, the graphene flakes and carbon nanotubes slide relative to one another, and the polymer network deforms by entropic elasticity. The polymer network traps individual graphene flakes and carbon nanotubes, so that repeated stretch neither breaks the percolating network nor shorts the two electrodes. The supercapacitor maintains 88% the initial capacitance after 1600 cycles of stretch to five times its initial dimension. The interpenetration of a covalent network of elastic polymer chains and a percolating network of conductive particles is generally applicable for making stretchable ionotronic devices.more » « less
-
Tangential flow interfacial self-assembly (TaFISA) is a promising scalable technique enabling uniformly aligned carbon nanotubes for high-performance semiconductor electronics. In this process, flow is utilized to induce global alignment in two-dimensional nematic carbon nanotube assemblies trapped at a liquid/liquid interface, and these assemblies are subsequently deposited on target substrates. Here, we present an observational study of experimental parameters that affect the interfacial assembly and subsequent aligned nanotube deposition. We specifically study the water contact angle (WCA) of the substrate, nanotube ink composition, and water subphase and examine their effects on liquid crystal defects, overall and local alignment, and nanotube bunching or crowding. By varying the substrate chemical functionalization, we determine that highly aligned, densely packed, individualized nanotubes deposit only at relatively small WCA between 35 and 65°. At WCA (< 10°), high nanotube bunching or crowding occurs, and the film is nonuniform, while aligned deposition ceases to occur at higher WCA (>65°). We find that the best alignment, with minimal liquid crystal defects, occurs when the polymer-wrapped nanotubes are dispersed in chloroform at a low (0.6:1) wrapper polymer to nanotube ratio. We also demonstrate that modifying the water subphase through the addition of glycerol not only improves overall alignment and reduces liquid crystal defects but also increases local nanotube bunching. These observations provide important guidance for the implementation of TaFISA and its use toward creating technologies based on aligned semiconducting carbon nanotubes.more » « less
-
Artificial synaptic devices made from natural biomaterials capable of emulating functions of biological synapses, such as synaptic plasticity and memory functions, are desirable for the construction of brain-inspired neuromorphic computing systems. The metal/dielectric/metal device structure is analogous to the pre-synapse/synaptic cleft/post-synapse structure of the biological neuron, while using natural biomaterials promotes ecologically friendly, sustainable, renewable, and low-cost electronic devices. In this work, artificial synaptic devices made from honey mixed with carbon nanotubes, honey-carbon nanotube (CNT) memristors, were investigated. The devices emulated spike-timing-dependent plasticity, with synaptic weight as high as 500%, and demonstrated a paired-pulse facilitation gain of 800%, which is the largest value ever reported. 206-level long-term potentiation (LTP) and long-term depression (LTD) were demonstrated. A conduction model was applied to explain the filament formation and dissolution in the honey-CNT film, and compared to the LTP/LTD mechanism in biological synapses. In addition, the short-term and long-term memory behaviors were clearly demonstrated by an array of 5 × 5 devices. This study shows that the honey-CNT memristor is a promising artificial synaptic device technology for applications in sustainable neuromorphic computing.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1557/adv.2020.234
