Environmental contamination by plastic waste is a growing threat to the environment and human health. Unfortunately, most post‐consumer plastics are still disposed of in landfills, even plastics that could be easily recycled via simple chemical processes. This disconnect between technology and implementation is partly due to the economic barrier posed by multi‐step processes that convert plastic waste into commodity goods. There is an urgent need for green methods to convert plastic waste directly into marketable commodities via simple processes. Herein we report a simple, single‐stage process to chemically recycle poly(ethylene terephthalate) (PET) to yield composites having thermal and mechanical properties that are competitive with commercial structural materials like Portland cement. In this protocol, a mixture of PET and geraniol are heated with elemental sulfur. In this process, transesterification between geraniol and PET with concomitant thiocracking of the PET backbone leads to the formation of a highly‐crosslinked sulfur–PET–geraniol (SPG) network composite. The composite exhibited compressive strength (23.1 MPa) greater than that required for Portland cement to be used in building foundations. This new, single‐stage chemical recycling strategy thus employs a bio‐olefin and waste sulfur to convert PET waste into a durable composite that could serve as a sustainable alternative to traditional cements.
The global production and consumption of plastics has increased at an alarming rate over the last few decades. The accumulation of pervasive and persistent waste plastic has concomitantly increased in landfills and the environment. The societal, ecological, and economic problems of plastic waste/pollution demand immediate and decisive action. In 2015, only 9% of plastic waste was successfully recycled in the United States. The major current recycling processes focus on the mechanical recycling of plastic waste; however, even this process is limited by the sorting/pretreatment of plastic waste and degradation of plastics during the process. An alternative to mechanical processes is chemical recycling of plastic waste. Efficient chemical recycling would allow for the production of feedstocks for various uses including fuels and chemical feedstocks to replace petrochemicals. This review focuses on the most recent advances for the chemical recycling of three major polymers found in plastic waste: PET, PE, and PP. Commercial processes for recycling hydrolysable polymers like polyesters or polyamides, polyolefins, or mixed waste streams are also discussed.
more » « less- Award ID(s):
- 1708844
- NSF-PAR ID:
- 10453419
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Journal of Polymer Science
- Volume:
- 58
- Issue:
- 10
- ISSN:
- 2642-4150
- Page Range / eLocation ID:
- p. 1347-1364
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
Abstract -
more » « less
Abstract The evergrowing plastic production and the caused concerns of plastic waste accumulation have stimulated the need for waste plastic chemical recycling/valorization. Current methods suffer from harsh reaction conditions and long reaction time. Herein we demonstrate a non-thermal plasma-assisted method for rapid hydrogenolysis of polystyrene (PS) at ambient temperature and atmospheric pressure, generating high yield (>40 wt%) of C1–C3hydrocarbons and ethylene being the dominant gas product (Selectivity of ethylene,
S C2H4 > 70%) within ~10 min. The fast reaction kinetics is attributed to highly active hydrogen plasma, which can effectively break bonds in polymer and initiate hydrogenolysis under mild condition. Efficient hydrogenolysis of post-consumer PS materials using this method is also demonstrated, suggesting a promising approach for fast retrieval of small molecular hydrocarbon modules from plastic materials as well as a good capability to process waste plastics in complicated conditions. -
null (Ed.)Plastics have revolutionized modern life, but have created a global waste crisis driven by our reliance and demand for low-cost, disposable materials. New approaches are vital to address challenges related to plastics waste heterogeneity, along with the property reductions induced by mechanical recycling. Chemical recycling and upcycling of polymers may enable circularity through separation strategies, chemistries that promote closed-loop recycling inherent to macromolecular design, and transformative processes that shift the life-cycle landscape. Polymer upcycling schemes may enable lower-energy pathways and minimal environmental impacts compared with traditional mechanical and chemical recycling. The emergence of industrial adoption of recycling and upcycling approaches is encouraging, solidifying the critical role for these strategies in addressing the fate of plastics and driving advances in next-generation materials design.more » « less
-
more » « less
Abstract The accumulation of plastic waste, due to lack of recycling, has led to serious environmental pollution. Although mechanical recycling can alleviate this issue, it inevitably reduces the molecular weight and weakens the mechanical properties of materials and is not suitable for mixed materials. Chemical recycling, on the other hand, breaks the polymer into monomers or small‐molecule constituents, allowing for the preparation of materials of quality comparable to that of the virgin polymers and can be applied to mixed materials. Mechanochemical degradation and recycling leverages the advantages of mechanical techniques, such as scalability and efficient energy use, to achieve chemical recycling. We summarize recent progress in mechanochemical degradation and recycling of synthetic polymers, including both commercial polymers and those designed for more efficient mechanochemical degradation. We also point out the limitations of mechanochemical degradation and present our perspectives on how the challenges can be mitigated for a circular polymer economy.
-
more » « less
Abstract The accumulation of plastic waste, due to lack of recycling, has led to serious environmental pollution. Although mechanical recycling can alleviate this issue, it inevitably reduces the molecular weight and weakens the mechanical properties of materials and is not suitable for mixed materials. Chemical recycling, on the other hand, breaks the polymer into monomers or small‐molecule constituents, allowing for the preparation of materials of quality comparable to that of the virgin polymers and can be applied to mixed materials. Mechanochemical degradation and recycling leverages the advantages of mechanical techniques, such as scalability and efficient energy use, to achieve chemical recycling. We summarize recent progress in mechanochemical degradation and recycling of synthetic polymers, including both commercial polymers and those designed for more efficient mechanochemical degradation. We also point out the limitations of mechanochemical degradation and present our perspectives on how the challenges can be mitigated for a circular polymer economy.
