skip to main content


Title: Mode multiplexer for guided optical and acoustic waves

Integrated acousto-optic (AO) devices utilize the strong overlap of acoustic and optical fields in a waveguide to facilitate efficient photon–phonon (Brillouin) interactions. For example, acoustic waves offer a lossless modulation mechanism for light. “Brillouin active” photonic platforms are currently being developed that may see optical, acoustic, and AO waveguide circuits on the same chip, where guided light and sound come together in active interaction regions. A key missing component for such a platform is a device that can multiplex modes across these two physical domains. We propose and describe a new class of optical and acoustic components, the “acoustic–optical mode multiplexer” (AOMM), a device that takes respective optical and acoustic waveguides as input ports and couples their excited guided modes into a single, joint output waveguide. We show an example suspended silicon–silicon dioxide design that combines two optical modes and a spatially separate acoustic mode into a single, co-guided output port with low insertion loss down to 0.3 dB for both optical and acoustic modes, and reflection below−<#comment/>20dBand−<#comment/>11dB, respectively. The AOMM may enable new, efficient integrated AO devices, such as isolators and circulators, where the acoustic wave generation and opto-acoustic interaction are separated.

 
more » « less
NSF-PAR ID:
10199802
Author(s) / Creator(s):
;
Publisher / Repository:
Optical Society of America
Date Published:
Journal Name:
Optics Letters
Volume:
45
Issue:
21
ISSN:
0146-9592; OPLEDP
Page Range / eLocation ID:
Article No. 6066
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Traveling-wave optomechanical interactions, known as Brillouin interactions, have now been established as a powerful and versatile resource for photonic sources, sensors, and radio-frequency processors. However, established Brillouin-based interactions with sufficient interaction strengths involve short phonon lifetimes, which critically limit their performance for applications, including radio-frequency filtering and optomechanical storage devices. Here, we investigate a new paradigm of optomechanical interactions with tightly confined fundamental acoustic modes, which enables the unique and desirable combination of high optomechanical coupling, long phonon lifetimes, tunable phonon frequencies, and single-sideband amplification. Using sensitive four-wave mixing spectroscopy controlling for noise and spatial mode coupling, optomechanical interactions with long><#comment/>2µ<#comment/>sphonon lifetimes and strong><#comment/>400W−<#comment/>1m−<#comment/>1coupling are observed in a tapered fiber. In addition, we demonstrate novel phonon self-interference effects resulting from the unique combination of an axially varying device geometry with long phonon lifetimes. A generalized theoretical model, in excellent agreement with experiments, is developed with broad applicability to inhomogeneous optomechanical systems.

     
    more » « less
  2. We experimentally demonstrate the utilization of adaptive optics (AO) to mitigate intra-group power coupling among linearly polarized (LP) modes in a graded-index few-mode fiber (GI FMF). Generally, in this fiber, the coupling between degenerate modes inside a modal group tends to be stronger than between modes belonging to different groups. In our approach, the coupling inside theLP11group can be represented by a combination of orbital-angular-momentum (OAM) modes, such that reducing power coupling in OAM set tends to indicate the capability to reduce the coupling inside theLP11group. We employ two output OAM modesl=+1andl=−<#comment/>1as resultant linear combinations of degenerateLP11aandLP11bmodes inside theLP11group of a∼<#comment/>0.6-kmGI FMF. The power coupling is mitigated by shaping the amplitude and phase of the distorted OAM modes. Each OAM mode carries an independent 20-, 40-, or 100-Gbit/s quadrature-phase-shift-keying data stream. We measure the transmission matrix (TM) in the OAM basis withinLP11group, which is a subset of the full LP TM of the FMF-based system. An inverse TM is subsequently implemented before the receiver by a spatial light modulator to mitigate the intra-modal-group power coupling. With AO mitigation, the experimental results forl=+1andl=−<#comment/>1modes show, respectively, that (i) intra-modal-group crosstalk is reduced by><#comment/>5.8dBand><#comment/>5.6dBand (ii) near-error-free bit-error-rate performance is achieved with a penalty of∼<#comment/>0.6dBand∼<#comment/>3.8dB, respectively.

     
    more » « less
  3. Electro-optic (EO) modulators rely on the interaction of optical and electrical signals with second-order nonlinear media. For the optical signal, this interaction can be strongly enhanced using dielectric slot–waveguide structures that exploit a field discontinuity at the interface between a high-index waveguide core and the low-index EO cladding. In contrast to this, the electrical signal is usually applied through conductive regions in the direct vicinity of the optical waveguide. To avoid excessive optical loss, the conductivity of these regions is maintained at a moderate level, thus leading to inherentRClimitations of the modulation bandwidth. In this paper, we show that these limitations can be overcome by extending the slot–waveguide concept to the modulating radio-frequency (RF) signal. Our device combines an RF slotline that relies onBaTiO3as a high-k dielectric material with a conventional silicon photonic slot waveguide and a highly efficient organic EO cladding material. In a proof-of-concept experiment, we demonstrate a 1 mm long Mach–Zehnder modulator that offers a 3 dB bandwidth of 76 GHz and a 6 dB bandwidth of 110 GHz along with a smallπ<#comment/>voltage of 1.3 V (Uπ<#comment/>L=1.3Vmm). We further demonstrate the viability of the device in a data-transmission experiment using four-state pulse-amplitude modulation (PAM4) at line rates up to 200 Gbit/s. Our first-generation devices leave vast room for further improvement and may open an attractive route towards highly efficient silicon photonic modulators that combine sub-1 mm device lengths with sub-1 V drive voltages and modulation bandwidths of more than 100 GHz.

     
    more » « less
  4. In this Letter, we present a high extinction ratio and compact on-chip polarization beam splitter (PBS), based on an extreme skin-depth (eskid) waveguide. Subwavelength-scale gratings form an effectively anisotropic metamaterial cladding and introduce a large birefringence. The anisotropic dielectric perturbation of the metamaterial cladding suppresses the TE polarization extinction via exceptional coupling, while the large birefringence efficiently cross-couples the TM mode, thus reducing the coupling length. We demonstrated the eskid-PBS on a silicon-on-insulator platform and achieved an ultra-high extinction ratio PBS (≈<#comment/>60dBfor TE and≈<#comment/>48dBfor TM) with a compact coupling length (≈<#comment/>14.5µ<#comment/>m). The insertion loss is also negligible (<<#comment/>0.6dB). The bandwidth is><#comment/>80(30) nm for the TE (TM) extinction ratio><#comment/>20dB. Our ultra-high extinction ratio PBS is crucial in implementing efficient polarization diversity circuits, especially where a high degree of polarization distinguishability is necessary, such as photonic quantum information processing.

     
    more » « less
  5. The design, fabrication, and characterization of low-loss ultra-compact bends in high-index (n=3.1atλ<#comment/>=1550nm) plasma-enhanced chemical vapor deposition silicon-rich silicon nitride (SRN) were demonstrated and utilized to realize efficient, small footprint thermo-optic phase shifter. Compact bends were structured into a folded waveguide geometry to form a rectangular spiral within an area of65×<#comment/>65µ<#comment/>m2, having a total active waveguide length of 1.2 mm. The device featured a phase-shifting efficiency of8mW/π<#comment/>and a 3 dB switching bandwidth of 15 KHz. We propose SRN as a promising thermo-optic platform that combines the properties of silicon and stoichiometric silicon nitride.

     
    more » « less