More Like this

1. Superconductivity and Pronounced Electron‐Phonon Coupling in Rock‐Salt Al _1−x O _1−x and Ti _1−x O _1−x

   https://doi.org/10.1002/aelm.202400141  

   Žguns, Pjotrs; Gedik, Nuh; Yildiz, Bilge; Li, Ju (May 2024, Advanced Electronic Materials)

   Abstract The highest ambient‐pressure Tc among binary compounds is 40 K (MgB2). Higher Tc is achieved in high‐pressure hydrides or multielement cuprates. Alternatively, are explored superconducting properties of binary, metastable sub‐oxides, that may emerge under extremely low oxygen partial pressure. The emphasis is on the rock‐salt structure, which is known to promote superconductivity, and exploring AlO, ScO, TiO, and NbO. Dynamic lattice stability is achieved by introducing metal and oxygen vacancies in the fashion of Nb_1−xO_1−x‐type structure (x = ¼). The electron‐phonon (e‐ph) coupling is remarkably large in Al_1−xO_1−xand Ti_1−xO_1−x(λ ≈ 2 at x = ¼), with Tc ≈ 35 K according to the Allen–Dynes equation. Significantly, the coupling strength is comparable to that in high‐pressure hydrides, yet, in contrast to hydrides and MgB2, the coupling is largely driven by low frequency phonons. Sc_1−xO_1−xand Nb_1−xO_1−xshow significantly smaller λ and Tc. Further, hydrogen intercalation to boost λ and Tc is investigated. Only Ti_1−x(O_1−xHx) and Nb_1−x(O_1−xHx) are dynamically stable upon intercalation, where H, respectively, decreases and increases Tc. The effect of H doping on electronic structure and Tc is discussed. Altogether, the study suggests that metal sub‐oxides are promising compounds to achieve strong e‐ph coupling at ambient pressure. 

   more » « less
2. Sr(Ag _1−x Li _x ) ₂ Se ₂ and [Sr ₃ Se ₂ ][(Ag _1−x Li _x ) ₂ Se ₂ ] Tunable Direct Band Gap Semiconductors

   https://doi.org/10.1002/anie.202301191  

   Zhou, Xiuquan; Wilfong, Brandon; Chen, Xinglong; Laing, Craig; Pandey, Indra R.; Chen, Ying‐Pin; Chen, Yu‐Sheng; Chung, Duck‐Young; Kanatzidis, Mercouri G. (February 2023, Angewandte Chemie International Edition)

   Abstract Synthesizing solids in molten fluxes enables the rapid diffusion of soluble species at temperatures lower than in solid‐state reactions, leading to crystal formation of kinetically stable compounds. In this study, we demonstrate the effectiveness of mixed hydroxide and halide fluxes in synthesizing complex Sr/Ag/Se in mixed LiOH/LiCl. We have accessed a series of two‐dimensional Sr(Ag_1−xLi_x)₂Se₂layered phases. With increased LiOH/LiCl ratio or reaction temperature, Li partially substituted Ag to form solid solutions of Sr(Ag_1−xLi_x)₂Se₂withxup to 0.45. In addition, a new type of intergrowth compound [Sr₃Se₂][(Ag_1−xLi_x)₂Se₂] was synthesized upon further reaction of Sr(Ag_1−xLi_x)₂Se₂with SrSe. Both Sr(Ag_1−xLi_x)₂Se₂and [Sr₃Se₂][(Ag_1−xLi_x)₂Se₂] exhibit a direct band gap, which increases with increasing Li substitution (x). Therefore, the band gap of Sr(Ag_1−xLi_x)₂Se₂can be precisely tuned via fine‐tuningxthat is controlled by only the flux ratio and temperature. 

   more » « less
3. Oxygen Incorporation in the Molecular Beam Epitaxy Growth of Sc _x Ga _1−x N and Sc _x Al _1−x N

   https://doi.org/10.1002/pssb.201900612  

   Casamento, Joseph; Xing, Huili Grace; Jena, Debdeep (January 2020, physica status solidi (b))

   Secondary‐ion mass spectrometry (SIMS) is used to determine impurity concentrations of carbon and oxygen in two scandium‐containing nitride semiconductor multilayer heterostructures: Sc_xGa_1−xN/GaN and Sc_xAl_1−xN/AlN grown by molecular beam epitaxy (MBE). In the Sc_xGa_1−xN/GaN heterostructure grown in metal‐rich conditions on GaN–SiC template substrates with Sc contents up to 28 at%, the oxygen concentration is found to be below 1 × 10¹⁹ cm⁻³, with an increase directly correlated with the scandium content. In the Sc_xAl_1−xN–AlN heterostructure grown in nitrogen‐rich conditions on AlN–Al₂O₃template substrates with Sc contents up to 26 at%, the oxygen concentration is found to be between 10¹⁹and 10²¹ cm⁻³, again directly correlated with the Sc content. The increase in oxygen and carbon takes place during the deposition of scandium‐alloyed layers. 

   more » « less
4. Bandgap engineering in quasi-1D Zr _1−x Ti _x S ₃ (0 ≤ x ≤ 1) solid solutions

   https://doi.org/10.1039/d5tc02480c  

   Muratov, Dmitry S; Bianco, Ettore; Karpenkov, Dmitry; Castellero, Alberto; Lipatov, Alexey; Maurino, Valter; Sinitskii, Alexander (January 2025, Journal of Materials Chemistry C)

   We synthesized a series of Zr_1−xTi_xS₃solid solutions (0 ≤x≤ 1)viaa direct reaction between Zr–Ti alloys and sulfur vapor at 600 °C. These solid solutions have a tunable bandgap in the 1–2 eV range that linearly increases with the Zr content. 

   more » « less
5. The impact of site selectivity and disorder on the thermoelectric properties of Yb ₂₁ Mn ₄ Sb ₁₈ solid solutions: Yb ₂₁ Mn _4−x Cd _x Sb ₁₈ and Yb _21−y Ca _y Mn ₄ Sb ₁₈

   https://doi.org/10.1039/d1ma00497b  

   He, Allan; Cerretti, Giacomo; Kauzlarich, Susan M. (August 2021, Materials Advances)

   Thermoelectric materials can convert heat into electricity. They are used to generate electricity when other power sources are not available or to increase energy efficiency by recycling waste heat. The Yb 21 Mn 4 Sb 18 phase was previously shown to have good thermoelectric performance due to its large Seebeck coefficient (∼290 μV K −1 ) and low thermal conductivity (0.4 W m −1 K −1 ). These characteristics stem respectively from the unique [Mn 4 Sb 10 ] 22− subunit and the large unit cell/site disorder inherent in this phase. The solid solutions, Yb 21 Mn 4− x Cd x Sb 18 ( x = 0, 0.5, 1.0, 1.5) and Yb 21− y Ca y Mn 4 Sb 18 ( y = 3, 6, 9, 10.5) have been prepared, their structures characterized and thermoelectric properties from room temperature to 800 K measured. A detailed look into the structural disorder for the Cd and Ca solid solutions was performed using synchrotron powder X-ray diffraction and pair distribution function methods and shows that these are highly disordered structures. The substitution of Cd gives rise to more metallic behavior whereas Ca substitution results in high resistivity. As both Cd and Ca are isoelectronic substitutions, the changes in properties are attributed to changes in the electronic structure. Both solid solutions show that the thermal conductivities remain extremely low (∼0.4 W m −1 K −1 ) and that the Seebeck coefficients remain high (>200 μV K −1 ). The temperature dependence of the carrier mobility with increased Ca substitution, changing from approximately T −1 to T −0.5 , suggests that another scattering mechanism is being introduced. As the bonding changes from polar covalent with Yb to ionic for Ca, polar optical phonon scattering becomes the dominant mechanism. Experimental studies of the Cd solid solutions result in a max zT of ∼1 at 800 K and, more importantly for application purposes, a ZT avg ∼ 0.6 from 300 K to 800 K. 

   more » « less