An official website of the United States government
How structural segment boundaries modulate earthquake behavior is an important scientific and societal question, especially for the Wasatch fault zone (WFZ) where urban areas lie along multiple fault segments. The extent to which segment boundaries arrest ruptures, host moderate magnitude earthquakes, or transmit ruptures to adjacent fault segments is critical for understanding seismic hazard. To help address this outstanding issue, we conducted a paleoseismic investigation at the Traverse Ridge paleoseismic site (TR site) along the ∼7-km-long Fort Canyon segment boundary, which links the Provo (59 km) and Salt Lake City (40 km) segments of the WFZ. At the TR site, we logged two trenches which were cut across sub-parallel traces of the fault, separated by ∼175 m. Evidence from these exposures leads us to infer that at least 3 to 4 earthquakes have ruptured across the segment boundary in the Holocene. Radiocarbon dating of soil material developed below and above fault scarp colluvial packages and within a filled fissure constrains the age of the events. The most recent event ruptured the southern fault trace between 0.2 and 0.4 ka, the penultimate event ruptured the northern fault trace between 0.6 and 3.4 ka, and two prior events occurred between 1.4 and 6.2 ka (on the southern fault trace) and 7.2 and 8.1 ka (northern fault trace). Colluvial wedge heights of these events ranged from 0.7 to 1.2 m, indicating the segment boundary experiences surface ruptures with more than 1 m of vertical displacement. Given these estimates, we infer that these events were greater than Mw 6.7, with rupture extending across the entire segment boundary and portions of one or both adjacent fault segments. The Holocene recurrence of events at the TR site is lower than the closest paleoseismic sites at the adjacent fault segment endpoints. The contrasts in recurrence rates observed within 15 km of the Fort Canyon fault segment boundary may be explained conceptually by a leaky segment boundary model which permits spillover events, ruptures centered on the segment boundary, and segmented ruptures. The TR site demonstrates the utility of paleoseismology within segment boundaries which, through corroboration of displacement data, can demonstrate rupture connectivity between fault segments and test the validity of rupture models.
more »
« less
Holocene Paleoseismology of the Steamboat Mountain Site: Evidence for Full-Length Rupture of the Teton Fault, Wyoming
ABSTRACT The 72-km-long Teton fault in northwestern Wyoming is an ideal candidate for reconstructing the lateral extent of surface-rupturing earthquakes and testing models of normal-fault segmentation. To explore the history of earthquakes on the northern Teton fault, we hand-excavated two trenches at the Steamboat Mountain site, where the east-dipping Teton fault has vertically displaced west-sloping alluvial-fan surfaces. The trenches exposed glaciofluvial, alluvial-fan, and scarp-derived colluvial sediments and stratigraphic and structural evidence of two surface-rupturing earthquakes (SM1 and SM2). A Bayesian geochronologic model for the site includes three optically stimulated luminescence ages (∼12–17 ka) for the glaciofluvial units and 16 radiocarbon ages (∼1.2–8.6 ka) for the alluvial-fan and colluvial units and constrains SM1 and SM2 to 5.5±0.2 ka, 1σ (5.2–5.9 ka, 95%) and 9.7±0.9 ka, 1σ (8.5–11.5 ka, 95%), respectively. Structural, stratigraphic, and geomorphic relations yield vertical displacements for SM1 (2.0±0.6 m, 1σ) and SM2 (2.0±1.0 m, 1σ). The Steamboat Mountain paleoseismic chronology overlaps temporally with earthquakes interpreted from previous terrestrial and lacustrine paleoseismic data along the fault. Integrating these data, we infer that the youngest Teton fault rupture occurred at ∼5.3 ka, generated 1.7±1.0 m, 1σ of vertical displacement along 51–70 km of the fault, and had a moment magnitude (Mw) of ∼7.0–7.2. This rupture was apparently unimpeded by structural complexities along the Teton fault. The integrated chronology permits a previous full-length rupture at ∼10 ka and possible partial ruptures of the fault at ∼8–9 ka. To reconcile conflicting terrestrial and lacustrine paleoseismic data, we propose a hypothesis of alternating full- and partial-length ruptures of the Teton fault, including Mw∼6.5–7.2 earthquakes every ∼1.2 ky. Additional paleoseismic data for the northern and central sections of the fault would serve to test this bimodal rupture hypothesis.
more »
« less
- Award ID(s):
- 1755079
- PAR ID:
- 10207927
- Date Published:
- Journal Name:
- Bulletin of the Seismological Society of America
- ISSN:
- 0037-1106
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Prominent scarps on Pinedale glacial surfaces along the eastern base of the Teton Range confirm latest Pleistocene to Holocene surface‐faulting earthquakes on the Teton fault, but the timing of these events is only broadly constrained by a single previous paleoseismic study. We excavated two trenches at the Leigh Lake site near the center of the Teton fault to address open questions about earthquake timing and rupture length. Structural and stratigraphic evidence indicates two surface‐faulting earthquakes at the site that postdate deglacial sediments dated by radiocarbon and optically stimulated luminescence to ∼10–11 ka. Earthquake LL2 occurred at ∼10.0 ka (9.7–10.4 ka; 95% confidence range) and LL1 at ∼5.9 ka (4.8–7.1 ka; 95%). LL2 predates an earthquake at ∼8 ka identified in the previous paleoseismic investigation at Granite Canyon. LL1 corresponds to the most recent Granite Canyon earthquake at ∼4.7–7.9 ka (95% confidence range). Our results are consistent with the previously documented long‐elapsed time since the most recent Teton fault rupture and expand the fault’s earthquake history into the early Holocene.more » « less
-
ABSTRACT Fault characterization is a critical step toward improving seismic hazard assessment in the Georgian Greater Caucasus but is largely absent from the region. Here, a paleoseismic trench near the capital city of Tbilisi revealed evidence for recurring surface rupture on a shallowly north-dipping thrust fault. The fault has broken through the overturned forelimb of a fault-propagation anticline that folds a sequence of soils and deposits. Stratigraphic relationships and radiocarbon dating of terrestrial gastropod shells corrected for “old carbon” age anomalies loosely constrain three surface-deforming earthquakes on this fault between ∼40 and ∼3 ka, with variable dip-slip displacements ranging between 0.35 and ∼3 m, and a cumulative displacement of 6.5 ± 0.85 m. Single event slips and recurrence intervals (11, 25, and 3 ka open interval) at this site demonstrate apparent slip rate variations of 3−7× over the last two earthquake cycles on the fault, which we attribute to possible rupture complexity involved in crustal thrust fault earthquakes. This study provides a structural and geochronologic template for future paleoseismic investigations in the Greater Caucasus while highlighting some of the challenges of conducting seismic source characterization in this region.more » « less
-
The East Anatolian fault in Turkey exhibits along-strike rupture segmentation, typically resulting in earthquakes with moment magnitude (Mw) up to 7.5 that are confined to individual segments. However, on 6 February 2023, a catastrophic Mw 7.8 earthquake struck near Kahramanmaraş (southeastern Turkey), defying previous expectations by rupturing multiple segments spanning over 300 km and overcoming multiple geometric complexities. We explore the mechanics of successive single- and multi-segment ruptures using numerical models of the seismic cycle calibrated to historical earthquake records and geodetic observations of the 2023 doublet. Our model successfully reproduces the observed historical rupture segmentation and the rare occurrence of multi-segment earthquakes. The segmentation pattern is influenced by variations in long-term slip rate along strike across the kinematically complex fault network between the Arabian and Anatolian plates. Our physics-based seismic cycle simulations shed light on the long-term variability of earthquake size that shapes seismic hazards.more » « less
-
Abstract Understanding mechanical conditions that lead to complexity in earthquakes is important to seismic hazard analysis. In this study, we simulate physics‐based multicycle dynamic models of the San Andreas fault (Carrizo through San Bernardino sections) and the San Jacinto fault (Claremont and Clark strands). We focus on a complex fault geometry based on the Southern California Earthquake Center Community Fault Model and its effect over multiple earthquake cycles. Using geodetically derived strain rates, we validate the models against geologic slip rates and recurrence intervals at various paleoseismic sites. We find that the interactions among fault geometry, dynamic rupture and interseismic stress accumulation produce stress heterogeneities, leading to rupture segmentation and variability in earthquake recurrence. Our models produce earthquakes with rupture extents similar to a recent comprehensive paleoseismic catalog. The “earthquake gates” of the Big Bend and the Cajon Pass occasionally impede dynamic ruptures. The angle of compression, which is the subtraction of the maximum shear strain rate direction from the local fault strike, can better determine the likelihood of the impedance of restraining bends to dynamic ruptures. Because the Big Bend has an angle of compression of ∼20°, ruptures that traverse the Big Bend, like the 1857 Fort Tejon earthquake, are more frequent than expected based on empirical relations which predict the ∼40° restraining bend to terminate most ruptures. Our models indicate that large ruptures tend to initiate north of the Big Bend and propagate southwards, similar to the 1857 earthquake, providing critical information for ground shaking assessment in the region.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1785/0120200212
