skip to main content

Title: Snowflake Selfies: A Low-Cost, High-Impact Approach toward Student Engagement in Scientific Research (with Their Smartphones)
Abstract An engaged scholarship project called “Snowflake Selfies” was developed and implemented in an upper-level undergraduate course at The Pennsylvania State University (Penn State). During the project, students conducted research on snow using low-cost, low-tech instrumentation that may be readily implemented broadly and scaled as needed, particularly at institutions with limited resources. During intensive observing periods (IOPs), students measured snowfall accumulations, snow-to-liquid ratios, and took microscopic photographs of snow using their smartphones. These observations were placed in meteorological context using radar observations and thermodynamic soundings, helping to reinforce concepts from atmospheric thermodynamics, cloud physics, radar, and mesoscale meteorology courses. Students also prepared a term paper and presentation using their datasets/photographs to hone communication skills. Examples from IOPs are presented. The Snowflake Selfies project was well received by undergraduate students as part of the writing-intensive course at Penn State. Responses to survey questions highlight the project’s effectiveness at engaging students and increasing their enthusiasm for the semester-long project. The natural link to social media broadened engagement to the community level. Given the successes at Penn State, we encourage Snowflake Selfies or similar projects to be adapted or implemented at other institutions.
; ; ; ; ;
Award ID(s):
Publication Date:
Journal Name:
Bulletin of the American Meteorological Society
Page Range or eLocation-ID:
E917 to E935
Sponsoring Org:
National Science Foundation
More Like this
  1. Abstract Harsh winters and hazards such as blizzards are synonymous with the northern Great Plains of the United States. Studying these events is difficult; the juxtaposition of cold temperatures and high winds makes microphysical observations of both blowing and falling snow challenging. Historically, these observations have been provided by costly hydrometeor imagers that have been deployed for field campaigns or at select observation sites. This has slowed the development and validation of microphysics parameterizations and remote-sensing retrievals of various properties. If cheaper, more mobile instrumentation can be developed, this progress can be accelerated. Further, lowering price barriers can make deployment of instrumentation feasible for education and outreach purposes. The Blowing Snow Observations at the University of North Dakota: Education through Research (BLOWN-UNDER) Campaign took place during the winter of 2019-2020 to investigate strategies for obtaining microphysical measurements in the harsh North Dakota winter. Student led, the project blended education, outreach, and scientific objectives. While a variety of in-situ and remote-sensing instruments were deployed for the campaign, the most novel aspect of the project was the development and deployment of OSCRE, the Open Snowflake Camera for Research and Education. Images from this instrument were combined with winter weather educational modules tomore »describe properties of snow to the public, K-12 students, and members of indigenous communities through a tribal outreach program. Along with an educational deployment of a Doppler on Wheels mobile radar, nearly 1000 individuals were reached during the project.« less
  2. The ability of in situ snowflake microphysical observations to constrain estimates of surface snowfall accumulations derived from coincident, ground-based radar observations is explored. As part of the High-Latitude Measurement of Snowfall (HiLaMS) field campaign, a Micro Rain Radar (MRR), Precipitation Imaging Package (PIP), and Multi-Angle Snow Camera (MASC) were deployed to the Haukeliseter Test Site run by the Norwegian Meteorological Institute during winter 2016/17. This measurement site lies near an elevation of 1000 m in the mountains of southern Norway and houses a double-fence automated reference (DFAR) snow gauge and a comprehensive set of meteorological observations. MASC and PIP observations provided estimates of particle size distribution (PSD), fall speed, and habit. These properties were used as input for a snowfall retrieval algorithm using coincident MRR reflectivity measurements. Retrieved surface snowfall accumulations were evaluated against DFAR observations to quantify retrieval performance as a function of meteorological conditions for the Haukeliseter site. These analyses found differences of less than 10% between DFAR- and MRR-retrieved estimates over the field season when using either PIP or MASC observations for low wind “upslope” events. Larger biases of at least 50% were found for high wind “pulsed” events likely because of sampling limitations in the inmore »situ observations used to constrain the retrieval. However, assumptions of MRR Doppler velocity for mean particle fall speed and a temperature-based PSD parameterization reduced this difference to +16% for the pulsed events. Although promising, these results ultimately depend upon selection of a snowflake particle model that is well matched to scene environmental conditions.

    « less
  3. Abstract. Ground-based measurements of frozen precipitation are heavily influenced by interactions of surface winds with gauge-shield geometry. The Multi-Angle Snowflake Camera (MASC), which photographs hydrometeors in free-fall from three different angles while simultaneously measuring their fall speed, has been used in the field at multiple midlatitude and polar locations both with and without wind shielding. Here, we present an analysis of Arctic field observations – with and without a Belfort double Alter shield – and compare the results to computational fluid dynamics (CFD) simulations of the airflow and corresponding particle trajectories around the unshielded MASC. MASC-measured fall speeds compare well with Ka-band Atmospheric Radiation Measurement (ARM) Zenith Radar (KAZR) mean Doppler velocities only when winds are light (≤5ms-1) and the MASC is shielded. MASC-measured fall speeds that do not match KAZR-measured velocities tend to fall below a threshold value that increases approximately linearly with wind speed but is generally <0.5ms-1. For those events with wind speeds ≤1.5ms-1, hydrometeors fall with an orientation angle mode of 12∘ from the horizontal plane, and large, low-density aggregates are as much as 5 times more likely to be observed. Simulations in the absence of a wind shield show a separation of flow at the upstreammore »side of the instrument, with an upward velocity component just above the aperture, which decreases the mean particle fall speed by 55 % (74 %) for a wind speed of 5 m s−1 (10 m s−1). We conclude that accurate MASC observations of the microphysical, orientation, and fall speed characteristics of snow particles require shielding by a double wind fence and restriction of analysis to events where winds are light (≤5ms-1). Hydrometeors do not generally fall in still air, so adjustments to these properties' distributions within natural turbulence remain to be determined.« less
  4. Flexible classroom spaces, which have movable tables and chairs that can be easily rearranged into different layouts, make it easier for instructors to effectively implement active learning than a traditional lecture hall. Instructors can move throughout the room to interact with students during active learning, and they can rearrange the tables into small groups to facilitate conversation between students. Classroom technology, such as wall-mounted monitors and movable whiteboards, also facilitates active learning by allowing students to collaborate. In addition to enabling active learning, the flexible classroom can still be arranged in front-facing rows that support traditional lecture-based pedagogies. As a result, instructors do not have to make time- and effort-intensive changes to the way their courses are taught in order to use the flexible classroom. Instead, they can make small changes to add active learning. We are in the second year of a study of flexible classroom spaces funded by the National Science Foundation’s Division of Undergraduate Education. This project asks four research questions that investigate the relationships between the instructor, the students, and the classroom: 1) What pedagogy do instructors use in a flexible classroom space? 2) How do instructors take advantage of the instructional affordances (including the movablemore »furniture, movable whiteboards, wall-mounted whiteboards, and wall-mounted monitors) of a flexible classroom? 3) What is the impact of faculty professional development on instructors’ use of flexible classroom spaces? and 4) How does the classroom influence the ways students interpret and engage in group learning activities? In the first year of our study we have developed five research instruments to answer these questions: a three-part classroom observation protocol, an instructor interview protocol, two instructor surveys, and a student survey. We have collected data from nine courses taught in one of ten flexible classrooms at the University of Michigan during the Fall 2018 semester. Two of these courses were first-year introduction to engineering courses co-taught by two instructors, and the other seven courses were sophomore- and junior-level core technical courses taught by one instructor. Five instructors participated in a faculty learning community that met three times during the semester to discuss active learning, to learn how to make the best use of the flexible classroom affordances, and to plan activities to implement in their courses. In each course we gathered data from the perspective of the instructor (through pre- and post-semester interviews), the researcher (through observations of three class meetings with our observation protocol), and the students (through conducting a student survey at the end of the semester). This poster presents qualitative and qualitative analyses of these data to answer our research questions, along with evidence based best practices for effectively using a flexible classroom.« less
  5. Additive manufacturing (AM) is prevalent in academic, industrial, and layperson use for the design and creation of objects via joining materials together in a layer upon layer fashion. However, few universities have an undergraduate course dedicated to it. Thus, using NSF IUSE support [grant number redacted for review] from the Exploration and Design Tier of the Engaged Student Learning Track, this project has created and implemented such a course at three large universities: Texas Tech (a Carnegie high research productivity and Hispanic Serving Institution), Kansas State (a Carnegie high research productivity and land grant university) and California State, Northridge (the largest of all the California State campuses and highly ranked in serving underprivileged students). Our research team includes engineering professors and a sociologist trained in assessment and K-12 outreach to determine the effects of the course on the undergraduate and high school students. We are currently in year two of the three years of NSF support. The course focuses on the fundamentals of the three families of prevailing AM processes: extrusion-based, powder-based, and liquid-based, as well as learning about practical solutions to additive manufacturing of common engineering materials including polymers, metals and alloys, ceramics, and composites. It has a lecturemore »plus lab format, in that students learn the fundamentals in a classroom, but then apply and broaden their knowledge in lab projects and independent studies. Additionally, as outreach, we host field trips from local high schools during which the undergraduates give presentations about discrete AM skills, then lead the high school students through a lab project focused on those skills. This creates a pipeline of knowledge about AM for younger students as well as an opportunity for undergraduates to develop leadership and speaking skills while solidifying their knowledge. We are also in the process of uploading videos and lab projects to an online Google Classroom so that those with access to 3D printers in other areas can learn online for free. We are also self-publishing an accompanying textbook and lab manual. Beyond the course itself, one of the innovations of our project is the assessment strategy. For both undergraduates and high school students, we have been able to collect content area knowledge both before and after the class, as well as information about their attitudes towards engineering and self-efficacy beliefs. This has been particularly illuminating in regards to subgroups like women and students of color. Our research questions include: i) what is the knowledge growth about AM during this course? ii) does this differ by university? iii) does this differ by gender or race? iv) what are the best ways to make this course portable to other universities? Preliminary results indicate a statistically significant improvement in knowledge for all students. This was particularly true for women, which may indicate the promise of AM courses in decreasing the female dropout rate in engineering. Attitudes towards engineering and self-efficacy perceptions also differed after the class, but in varying ways by demographic subgroups and university. This will be explored more in the paper.« less