Recent progress on stretchable, tough dual-dynamic polymer single networks (SN) and interpenetrated networks (IPN) has broadened the potential applications of dynamic polymers. However, the impact of macromolecular structure on the material mechanics remains poorly understood. Here, rapidly exchanging hydrogen bonds and thermoresponsive Diels–Alder bonds were included into molecularly engineered interpenetrated network materials. RAFT polymerization was used to make well-defined polymers with control over macromolecular architecture. The IPN materials were assessed by gel permeation chromatography, differential scanning calorimetry, tensile testing and rheology. The mechanical properties of these IPN materials can be tuned by varying the crosslinker content and chain length. All materials are elastic and have dynamic behavior at both ambient temperature and elevated temperature (90 °C), owing to the presence of the dual dynamic noncovalent and covalent bonds. 100% self-healing recovery was achieved and a maximum stress level of up to 6 MPa was obtained. The data suggested the material's healing properties are inversely proportional to the content of the crosslinker or the degree of polymerization at both room and elevated temperature. The thermoresponsive crosslinker restricted deformation to some extent in an ambient environment but gave excellent malleability upon heating. The underlying mechanism was explored by the computational simulations. Furthermore, a single network material with the same crosslinker content and degree of polymerization as the IPN was made. The SN was substantially weaker than the comparable IPN material.
more »
« less
Accelerating dynamic exchange and self-healing using mechanical forces in crosslinked polymers
Dynamically crosslinked polymers and their composites have tremendous potential in the development of the next round of advanced materials for aerospace, sensing, and tribological applications. These materials have self-healing properties, or the ability to recover from scratches and cuts. Applied forces can have a significant impact on the mechanical properties of non-dynamic systems. However, the impacts of forces on the self-healing ability of dynamically bonded systems are still poorly understood. Here, we used a combined computational and experimental approach to study the impact of mechanical forces on the self-healing of a model dynamic covalent crosslinked polymer system. Surprisingly, the mechanical history of the materials has a distinct impact on the observed recovery of the mechanical properties after the material is damaged. Higher compressive forces and sustained forces lead to greater self-healing, indicating that mechanical forces can promote dynamic chemistry. The atomistic details provided in molecular dynamics simulations are used to understand the mechanism with both non-covalent and dynamic covalent linkage responses to the external loading. Finite element analysis is performed to bridge the gap between experiments and simulations and to further explore the underlying mechanisms. The self-healing behavior of the crosslinked polymers is explained using reaction rate theory, with the applied force proposed to lower the energy barrier to bond exchange. Overall, our study provides fundamental understanding of how and why the self-healing of cross-linked polymers is affected by a compressive force and the force application time.
more »
« less
- Award ID(s):
- 1749730
- NSF-PAR ID:
- 10218012
- Date Published:
- Journal Name:
- Materials Horizons
- Volume:
- 7
- Issue:
- 6
- ISSN:
- 2051-6347
- Page Range / eLocation ID:
- 1581 to 1587
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
null (Ed.)A one pot synthesis is applied to control the chain structure and architecture of multiply dynamic polymers, enabling fine tuning of materials properties by choice of polymer chain length or crosslink density. Macromolecules containing both non-covalent linkers based on quadruple hydrogen-bonded 2-(((6-(3-(6-methyl-4-oxo-1,4-dihydropyrimidin-2-yl)ureido)hexyl)carbamoyl)oxy)ethyl methacrylate (UPyMA), and thermoresponsive dynamic covalent furan–maleimide based Diels–Alder linkers are explored. The primary polymer's architecture was controlled by reversible addition-fragmentation chain transfer (RAFT) polymerization, with the dynamic non-covalent (UPyMA) and dynamic covalent furfuryl methacrylate (FMA) units incorporated into the same backbone. The materials are crosslinked, taking advantage of the “click” chemistry properties of the furan–maleimide reaction. The polymer materials showed stimulus-responsive thermomechanical properties with a decrosslinking temperature increasing with the polymer's primary chain length and crosslink density. The polymers had good thermally promoted self-healing properties due to the dynamic covalent Diels–Alder bonds. Besides, the materials had excellent stress relaxation characteristics induced by the exchange of the hydrogen bonds in UPyMA units.more » « less
-
Dynamic bonds are a powerful approach to tailor the mechanical properties of elastomers and introduce shape-memory, self-healing, and recyclability. Among the library of dynamic crosslinks, electrostatic interactions among oppositely charged ions have been shown to enable tough and resilient elastomers and hydrogels. In this work, we investigate the mechanical properties of ionically crosslinked ethyl acrylate-based elastomers assembled from oppositely charged copolymers. Using both infrared and Raman spectroscopy, we confirm that ionic interactions are established among polymer chains. We find that the glass transition temperature of the complex is in between the two individual copolymers, while the complex demonstrates higher stiffness and more recovery, indicating that ionic bonds can strengthen and enhance recovery of these elastomers. We compare cycles to increasing strain levels at different strain rates, and hypothesize that at fast strain rates ionic bonds dynamically break and reform while entanglements do not have time to slip, and at slow strain rates ionic interactions are disrupted and these entanglements slip significantly. Further, we show that a higher ionic to neutral monomer ratio can increase the stiffness, but its effect on recovery is minimal. Finally, taking advantage of the versatility of acrylates, ethyl acrylate is replaced with the more hydrophilic 2-hydroxyethyl acrylate, and the latter is shown to exhibit better recovery and self-healing at a cost of stiffness and strength. The design principles uncovered for these easy-to-manufacture polyelectrolyte complex-inspired bulk materials can be broadly applied to tailor elastomer stiffness, strength, inelastic recovery, and self-healing for various applications.more » « less
-
more » « less
Abstract Dynamic covalent chemistry (DCC) crosslinks can form hydrogels with tunable mechanical properties permissive to injectability and self‐healing. However, not all hydrogels with transient crosslinks are easily extrudable. For this reason, two additional design parameters must be considered when formulating DCC‐crosslinked hydrogels: 1) degree of functionalization (DoF) and 2) polymer molecular weight (MW). To investigate these parameters, hydrogels comprised of two recombinant biopolymers: 1) a hyaluronic acid (HA) modified with benzaldehyde and 2) an elastin‐like protein (ELP) modified with hydrazine (ELP‐HYD), are formulated. Several hydrogel families are synthesized with distinct HA MW and DoF while keeping the ELP‐HYD component constant. The resulting hydrogels have a range of stiffnesses,
G ′ ≈ 10–1000 Pa, and extrudability, which is attributed to the combined effects of DCC crosslinks and polymer entanglements. In general, lower MW formulations require lower forces for injectability, regardless of stiffness. Higher DoF formulations exhibit more rapid self‐healing. Gel extrusion through a cannula (2 m length, 0.25 mm diameter) demonstrates the potential for minimally invasive delivery for future biomedical applications. In summary, this work highlights additional parameters that influence the injectability and network formation of DCC‐crosslinked hydrogels and aims to guide future design of injectable hydrogels. -
more » « less
Abstract Dynamically cross‐linked polymer networks have attracted significant interest in recent years due to their unique and improved properties including increased toughness, malleability, shape memory, and self‐healing. Here, a computational study on the mechanical behavior of dynamically cross‐linked polymer networks is presented. Coarse grained models for different polymer network configurations are established and their mechanical properties using molecular dynamics (MD) simulations are predicted. Consistent with the experimental measurements, the simulation results show that interpenetrating networks (IPN) withstand considerably higher stress compared to the single networks (SN). Additionally, the MD results demonstrate that the origin of this variation in mechanical behavior of IPN and SN configurations goes back to the difference in spatial degrees of freedom of the noncovalent cross‐linkers, represented by nonbonded interactions within the two system types. The results of this work provide new insight for future studies on the design of systems with dual dynamic cross‐linkers where one linkage exchanges rapidly and provides autonomic dynamic character, while the other is a stimulus responsive dynamic covalent linkage that provides stability with dynamic exchange on‐demand.
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1039/C9MH01938C
