An official website of the United States government
Abstract Geophysical sensing in the open ocean is both costly and technically challenging. Here we developed a novel distributed fiber optic sensing technique that employs microwave modulation for phase measurement in signals returned from submarine repeaters. We transformed a trans‐Atlantic telecom cable into an 81‐sensor array and measured sub‐millihertz strains. The strains correlate with ocean tide height variations in phase, suggesting a dominant factor of the cable's Poisson's effect. Large strains observed at fiber spans located in the shallow water match the strong variations of simulated seafloor temperature. This study presents the first experimental confirmation of detecting sub‐millihertz signals using trans‐oceanic distributed sensing with submarine cables at span‐wise spatial resolution (∼80 km), opening the potential for cost‐efficient tsunami early warning and long‐term ocean temperature monitoring compatible with active data‐carrying fibers.
more »
« less
Optical polarization–based seismic and water wave sensing on transoceanic cables
Seafloor geophysical instrumentation is challenging to deploy and maintain but critical for studying submarine earthquakes and Earth’s interior. Emerging fiber-optic sensing technologies that can leverage submarine telecommunication cables present an opportunity to fill the data gap. We successfully sensed seismic and water waves over a 10,000-kilometer-long submarine cable connecting Los Angeles, California, and Valparaiso, Chile, by monitoring the polarization of regular optical telecommunication channels. We detected multiple moderate-to-large earthquakes along the cable in the 10-millihertz to 5-hertz band. We also recorded pressure signals from ocean swells in the primary microseism band, implying the potential for tsunami sensing. Our method, because it does not require specialized equipment, laser sources, or dedicated fibers, is highly scalable for converting global submarine cables into continuous real-time earthquake and tsunami observatories.
more »
« less
- Award ID(s):
- 1848166
- PAR ID:
- 10220270
- Date Published:
- Journal Name:
- Science
- Volume:
- 371
- Issue:
- 6532
- ISSN:
- 0036-8075
- Page Range / eLocation ID:
- 931 to 936
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Mai, P M (Ed.)ABSTRACT Detecting offshore earthquakes in real time is challenging for traditional land-based seismic networks due to insufficient station coverage. Application of distributed acoustic sensing (DAS) to submarine cables has the potential to extend the reach of seismic networks and thereby improve real-time earthquake detection and earthquake early warning (EEW). We present a complete workflow of a modified point-source EEW algorithm, which includes a machine-learning-based model for P- and S-wave phase picking, a grid-search location method, and a locally calibrated empirical magnitude estimation equation. Examples are shown with offshore earthquakes from the SeaFOAM DAS project using a 52-km-long submarine cable in Monterey Bay, California, demonstrating the robustness of the proposed workflow. When comparing to the current onshore network, we can expect up to 6 s additional warning time for earthquakes in the offshore San Gregorio fault zone, representing a substantial improvement to the existing ShakeAlert EEW system.more » « less
-
Abstract Monitoring seismic activity on the ocean floor is a critical yet challenging task, largely due to the difficulties of physical deployment and maintenance of sensors in these remote areas. Optical fiber sensing techniques are well-suited for this task, given the presence of existing transoceanic telecommunication cables. However, current techniques capable of interrogating the entire length of transoceanic fibers are either incompatible with conventional telecommunication lasers or are limited in their ability to identify the position of the seismic wave. In this work, we propose and demonstrate a method to measure and localize seismic waves in transoceanic cables using only conventional polarization optics, by launching pulses of changing polarization. We demonstrate our technique by measuring and localizing seismic waves from a magnitudeMw6.0 earthquake (Guerrero, Mexico) using a submarine cable connecting Los Angeles, California and Valparaiso, Chile. Our approach introduces a cost-effective and practical solution that can potentially increase the density of geophysical measurements in hard-to-reach regions, improving disaster preparedness and response, with minimal additional demands on existing infrastructure.more » « less
-
Abstract Distributed acoustic sensing (DAS) on submarine fiber-optic cables is providing new observational insights into solid Earth processes and ocean dynamics. However, the availability of offshore dark fibers for long-term deployment remains limited. Simultaneous telecommunication and DAS operating at different wavelengths in the same fiber, termed optical multiplexing, offers one solution. In May 2024, we collected a four-day DAS dataset utilizing an L-band DAS interrogator and multiplexing on the submarine cables of the Ocean Observatory Initiative’s Regional Cabled Array offshore central Oregon. Our findings show that multiplexed DAS has no impact on communications and is unaffected by network traffic. Moreover, the quality of DAS data collected via multiplexing matches that of data obtained from dark fiber. With a machine-learning event detection workflow, we detect 31 T waves and the S wave of one regional earthquake, demonstrating the feasibility of continuous earthquake monitoring using the multiplexed offshore DAS. We also examine ocean waves and ocean-generated seismic noise. We note high-frequency seismic noise modulated by low-frequency ocean swell and hypothesize about its origins. The complete dataset is freely available.more » « less
-
Submarine cables have become a vital component of modern infrastructure, but past submarine cable natural hazard studies have mostly focused on potential cable damage from landslides and tsunamis. A handful of studies examine the possibility of space weather effects in submarine cables. The main purpose of this study is to develop a computational model, using Python , of geomagnetic induction on submarine cables. The model is used to estimate the induced voltage in the submarine cables in response to geomagnetic disturbances. It also utilizes newly acquired knowledge from magnetotelluric studies and associated investigations of geomagnetically induced currents in power systems. We describe the Python-based software, its working principle, inputs/outputs based on synthetic geomagnetic field data, and compare its operational capabilities against analytical solutions. We present the results for different model inputs, and find: 1) the seawater layer acts as a shield in the induction process: the greater the ocean depth, the smaller the seafloor geoelectric field; and 2) the model is sensitive to the Ocean-Earth layered conductivity structure.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1126/science.abe6648
