skip to main content


Title: Comparison of surface energy and adhesion energy of surface-treated particles
Award ID(s):
1757799
PAR ID:
10220404
Author(s) / Creator(s):
; ; ; ;
Date Published:
Journal Name:
Powder Technology
Volume:
384
Issue:
C
ISSN:
0032-5910
Page Range / eLocation ID:
267 to 275
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. null (Ed.)
    The mineral industry uses tremendous amounts of water every year in the processing of ores. Sustainable practices associated with the processing of ores are, therefore, of critical importance. The project described herein is the first step toward producing a dry, particle-separation process based upon control and exploitation of adhesive forces. In this research, the goal is to determine the surface energy of particles, and further, whether the solid sur- face energy can be used to understand the adhesion between these particles and surface-modified substrates. Glass spheres were chosen to represent silicate minerals, the most abundant type of minerals found in mineral deposits. The solid surface energy was found by using contact angle measurements and by applying the van Oss-Good-Chaudhury (VOGC) method. The VOGC method utilizes three-liquid triads to determine the Lifshitz- van der Waals, Lewis acid and Lewis base surface energy components. Surface energies from plasma-cleaned glass were between 40.2 and 60.2 mJ/m2; for the same glass with a hydrophobic chemical surface treatment, trichloro(octadecyl)silane (TCOD), the surface energy was between 20.8 and 20.9 mJ/m2; and for the glass with a hydrophilic chemical surface treatment (n1-(3-trimethoxysilylpropyl) diethylenetriamine (TMPA)) the surface energy was between 46.3 and 61.6 mJ/m2. The particle-substrate adhesion was also measured using a mechanical impact tester. Glass disks and beads were used, cleaned and surface treated with TCOD and TMPA. A custom horizontal impact tester was designed and used to measure the adhesion force between the glass spheres and a glass disk substrate. Impact of the disk/particle puck causes particle removal as tensile forces act on the particles. The tensile detachment force and adhesive force are equal at a critical particle size. Johnson- Kendall-Roberts (JKR) theory was used to determine the interfacial energy between the particles and the surface. The average interfacial energy of plasma cleaned glass, glass treated with TCOD and with TMPA were 44.8 mJ/m2, 21.6 mJ/m2, and 40.1 mJ/m2, respectively. These values are in good agreement with the literature values and with the interfacial energy determined using the VOGC method described above, demonstrating that two approaches compare favorably, despite the dramatically different methods (molecular vs mechanical) utilized. 
    more » « less
  2. Abstract

    Land‐surface partitioning of net radiation into sensible and latent heat fluxes is critical for hydroclimatic processes but remains highly uncertain due to limited observations. We show that a suitable extension of the Budyko's curve, a well‐known framework in hydrology for water balance estimation, can be utilized effectively to partition the surface energy fluxes by expressing the long‐term evaporative fraction (EF) as a function of the dryness index only. The combination of this energy partitioning method with hydrological observations allows us to estimate the surface energy components at watershed and continental scales. Using this new framework, we show that North American Regional Reanalysis data overestimate surface evaporation, likely influencing the modeling of atmospheric convection. The obtained hydrologic constrains on energy partitioning can be used to provide more accurate estimations of surface energy fluxes for hydroclimatic predictions.

     
    more » « less
  3. Abstract

    The traditional surface energy balance (SEB) is investigated by applying the thermal energy balance based on total energy conservation. Based on total energy conservation, the thermal and the kinetic energy balances are connected through non‐hydrostatic energy transfer (QNH) as a result of the hydrostatic imbalance caused by potential energy changes from vertical density fluxes in response to mechanical and thermal forcing in the stratified atmosphere. Field observations show that bothQNHand the surface energy imbalance (SEI) have the same diurnal variation; both are near zero under neutral conditions and increase with increasing atmospheric unstable stratification. Energy dissipation due to enhanced turbulent kinetic energy fromQNHis estimated to be the largest energy consumption for potentially explaining the largest SEI under free convective conditions. The relatively large value of energy dissipation in the atmospheric surface layer is due to its exponential increase toward the surface and its increase with atmospheric instability. The other two energy transfers that are traditionally missed are related to water mass flowing through the open soil and air layers, but are relatively small in comparison with the energy dissipation. The new understanding of the energy transfers provides not only a potential explanation for the temporal and magnitude variations of the SEI but also the explanation for different heat/moisture transferring efficiencies between thermally and mechanically generated turbulent mixing. Understanding the SEB is important not only for solving the SEI but also for understanding energy conservation in the atmosphere.

     
    more » « less