<?xml-model href='http://www.tei-c.org/release/xml/tei/custom/schema/relaxng/tei_all.rng' schematypens='http://relaxng.org/ns/structure/1.0'?><TEI xmlns="http://www.tei-c.org/ns/1.0">
	<teiHeader>
		<fileDesc>
			<titleStmt><title level='a'>Interface electronic structure between aluminum and black phosphorus</title></titleStmt>
			<publicationStmt>
				<publisher></publisher>
				<date>09/01/2020</date>
			</publicationStmt>
			<sourceDesc>
				<bibl> 
					<idno type="par_id">10227544</idno>
					<idno type="doi">10.1016/j.rinp.2020.103222</idno>
					<title level='j'>Results in Physics</title>
<idno>2211-3797</idno>
<biblScope unit="volume">18</biblScope>
<biblScope unit="issue">C</biblScope>					

					<author>Baoxing Liu</author><author>Haipeng Xie</author><author>Dongmei Niu</author><author>Shitan Wang</author><author>Yuan Zhao</author><author>Yuquan Liu</author><author>Yongli Gao</author>
				</bibl>
			</sourceDesc>
		</fileDesc>
		<profileDesc>
			<abstract><ab><![CDATA[The electronic properties of the interface between Al and black phosphorus were studied by photoemission spectroscopy (PES). We observed that the growth pattern of Al deposited onto the BP film is Stranski-Krastanov mode. There is a reaction between Al atoms and P atoms at the interface and forming Al-P compounds, which changes the interface barriers and impedes carrier transfer. It is suggested that an inert buffer layer is necessary to protect BP and lower the carrier barriers to develop Al/BP-based device with high performance.]]></ab></abstract>
		</profileDesc>
	</teiHeader>
	<text><body xmlns="http://www.tei-c.org/ns/1.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xlink="http://www.w3.org/1999/xlink">
<div xmlns="http://www.tei-c.org/ns/1.0"><head>Introduction</head><p>2D materials are extensively studied because of their special geometric structures and physicochemical properties. Graphene is the forefather of 2D materials, which has high carrier mobility and outstanding physical properties <ref type="bibr">[1]</ref><ref type="bibr">[2]</ref><ref type="bibr">[3]</ref><ref type="bibr">[4]</ref><ref type="bibr">[5]</ref><ref type="bibr">[6]</ref>. However, its potential functionalities and applications are limited due to the zero-band gap characteristics of graphene <ref type="bibr">[7]</ref>. As a fast emerging 2D material, black phosphorus (BP) has become a research hotspot due to its remarkable photoelectric properties <ref type="bibr">[8]</ref><ref type="bibr">[9]</ref><ref type="bibr">[10]</ref><ref type="bibr">[11]</ref><ref type="bibr">[12]</ref><ref type="bibr">[13]</ref><ref type="bibr">[14]</ref>. Like graphite, BP has a layered structure and stack by weak van der Waals interactions. The most significant difference between BP and graphene is that BP has a band gap and its value can be adjusted with the thickness <ref type="bibr">[15]</ref><ref type="bibr">[16]</ref><ref type="bibr">[17]</ref>. BP has good electrical properties at room temperature, the application potential of BP has been greatly developed <ref type="bibr">[18]</ref>. BP as a 2D monoelemental materials, doping a certain VA group element in it, tuning the monoelemental crystals into bielemental, can preserve the advantages of BP's unique structures, modulate its properties, and further expand its multifunctional applications <ref type="bibr">[19]</ref>. Optoelectronic devices fabricated from 2D semiconductors such as BP exhibit many-body complexes which determine the materials optical and electrical properties. Characterization and manipulation of these complexes have become a reality, further improving the performance of BP-based optoelectronic devices <ref type="bibr">[20]</ref>. A variety of equipment based on BP such as the field-effect transistor, solar cells, photodetector, pulsed lasers, have proven to be viable <ref type="bibr">[21]</ref><ref type="bibr">[22]</ref><ref type="bibr">[23]</ref><ref type="bibr">[24]</ref><ref type="bibr">[25]</ref><ref type="bibr">[26]</ref><ref type="bibr">[27]</ref><ref type="bibr">[28]</ref>.</p><p>One significant challenge facing BP applications is its environmental stability. The peeled BP films will degrade in the atmosphere, lead to the carrier mobility and on/off current ratio of BP decrease significantly <ref type="bibr">[22,</ref><ref type="bibr">29]</ref>. Thus, in order to maintain the inherent structure and property of BP, an efficient and reliable isolation/passivation layer is needed. AlO x overlayer protection is an effective method to passivate BP flakes from atmospheric degradation, Wood et al. reported that the BP FETs encapsulated by deposition of Al can maintain high mobilities for more than two weeks in the atmosphere <ref type="bibr">[29]</ref>. Furthermore, Al 2 O 3 can be used as barrier layers. Liu et al. fabricated an ambipolar BP transistor using an Al 2 O 3 capping layer and the ambipolarity is obtained by reduced the Schottky barrier heights <ref type="bibr">[30]</ref>. Generally, the protective and barrier layers are prepared by depositing Al on BP films and then performing thermal oxidation. Perello et al. reported a high-performance n-type BP transistor with Al contacts, the electron mobilities ranging from 10 2 to 10 3 cm 2 V -1 s -1 and I on /I off &gt; 10 5 at room temperature. Due to the existence of a Schottky barrier at the Al-BP contact, a flake thickness dependence of dominant carrier type was also observed <ref type="bibr">[31]</ref>. Liu et al. showed theoretically and experimentally the effectiveness of Al atoms as electron donors to transform the undoped p-type BP into ntype conductance <ref type="bibr">[32]</ref>. Despite the fascinating device characteristics, the interface electronic structure between Al and BP is still not very clear, to better understand the behavior of the device, it is necessary to further study it.</p><p>Here, the electronic structure of the Al/BP interface was studied by PES. In our study we found that the growth pattern of Al deposited onto the BP film was in the Stranski-Krastanov mode. The Al-P compound formed at the initial deposition of Al and its amount increased gradually with increasing the Al thickness from 0 to 8 &#197;. Angle-resolved X-ray photoemission spectroscopy (AR-XPS) data shows that the Al-P compounds only exist at the interface and change the interface barriers, <ref type="url">https://doi.org/10.1016/j.rinp.2020.103222</ref> which is harmful to carriers transport. Our study is helpful to understand the behavior of the Al/BP interface.</p></div>
<div xmlns="http://www.tei-c.org/ns/1.0"><head>Materials and methods</head><p>In situ photoemission experiments were carried out in an ultrahigh vacuum system. Before the experiment, the evaporation source was degassed at appropriate temperatures. The manufacturer of BP single crystal is HQ Graphene, and it is mechanically peeled with scotch tape in the preparation room. Then, the obtained freshly cleaved bulk BP crystal was immediately transferred to the analysis chamber and the surface composition and crystal structure have been verified. Al films were grown layer by layer in MBE chamber whose pressure is about 2 &#215; 10 -10 mbar and its thickness was monitored by a quartz crystal microbalance. X-ray photoemission spectroscopy (XPS) measurement was operated with 100 meV scanning step <ref type="bibr">[33]</ref>. In order to measure the secondary electrons cutoff, a -5 V bias was applied to the sample during ultraviolet photoemission spectroscopy (UPS) measurement <ref type="bibr">[34,</ref><ref type="bibr">35]</ref>.  <ref type="figure">1(c</ref>), the peak of P 2p is located at ca. 130.24 eV, and no other peak has been detected at high binding energy, indicating that the BP has not been oxidized during mechanical exfoliation in high vacuum <ref type="bibr">[36]</ref>. A clear low energy electron diffraction (LEED) pattern has been presented as shown in the inset of Fig. <ref type="figure">1(c</ref>). Combining with the XPS and LEED data, it is found that the BP surface was successfully prepared by mechanically peeled off in the preparation chamber.</p></div>
<div xmlns="http://www.tei-c.org/ns/1.0"><head>Results and discussion</head><p>As shown in Fig. <ref type="figure">2</ref>(a) and (b), UPS spectra of the cut-off region and the VB edge region evolve with the thickness of Al deposited on BP. For clarity of vision, all the spectra have been normalized. For the intrinsic BP, its Work Function (WF) is 4.24 eV which is consistent basically with the previous report <ref type="bibr">[35]</ref>. The WF is 4.14 eV when the thickness of Al is 1 &#197; and decreases with the subsequent deposition, approach to the minimum 3.81 eV after the deposition of 8 &#197; Al. Then WF increases slowly with further increase the Al thickness and it is 4.03 eV at 60 &#197;. As shown in Fig. <ref type="figure">2</ref>(b), the valence band maximum (VBM) of intrinsic BP is about 0.1 eV . When the thickness of Al reaches 30 &#197;, the metallic Fermi level cutoff begins to appear. Fig. <ref type="figure">2(c</ref>) display the evolution of WF with the Al film thickness, a gradual shift was observed with the subsequent Al deposition, indicating that the interface barriers have been changed. According to the band gap (E gap ) of bulk BP is 0.3 eV, the conduction band minimum (CBM) of intrinsic BP calculated by formula E CBM = E gap -E VBM is 0.2 eV <ref type="bibr">[8]</ref>.</p><p>XPS was used to study the chemical properties of samples and investigate the reasons for the change of WF with increasing Al thickness. Shown in Fig. <ref type="figure">3</ref>(a), (b) are P 2p and Al 2p spectra at Al film thickness from 0 to 60 &#197; and all the spectra have been normalized. The core level of P 2p is a doublet consisting of P 2p 3/2 and P 2p 1/2 , and in this paper, only the P 2p 3/2 peak is analyzed in detail for simplicity <ref type="bibr">[36]</ref>. The translucent blue peak corresponds to the P 2p 3/2 peak of intrinsic BP, the position is at 130.24 eV. With the increase of Al thickness, it remains basically unchanged. At the initial deposition of Al, a translucent red peak appeared, corresponding to Al atoms at the interface reaction with P atoms and forming Al-P compounds, the position is at 129.24 eV. Similar results were obtained by several controlled experiments. In the first controlled experiment, the surface of the bulk BP has a small amount of absorbed oxygen and the Al films were thermally evaporated in the molecular beam epitaxy chamber whose pressure is better than 1.5 &#215; 10 -10 mbar. Due to the oxygen molecules are adsorbed on the BP surface, Al ions are more easily oxidized, so the AlO x content is greater at the initial deposition of Al, as shown in supporting information Fig. <ref type="figure">S1</ref>. It is found that the Al-P compounds content obviously increased at 4 &#8491; and decreased at 15 &#8491;. It indicated that the Al preferentially react with the absorbed oxygen and the formation of Al-P compounds also exist at interface region. To eliminate the interference of the equipment, we repeated the experiment using a new Al evaporation source in another evaporation chamber whose pressure is superior to 5 &#215; 10 -8 mbar, and also found the formation of Al-P compounds, as shown in Fig. <ref type="figure">S2</ref>. Results from experiments under different conditions indicate that the Al-P compounds appear at the Al/BP interface when Al is deposited on BP.</p><p>Al 2p is more complex to analyze. In Fig. <ref type="figure">3</ref>(b), at the initial Al deposition, the Al 2p-related peaks are located at 74.24 eV and 75.72 eV, respectively. The 74.24 eV one is Al-P compounds and it gradually attenuated as the Al overlayer thickness increases. The 75.72 eV peak is from AlO x , <ref type="bibr">[37]</ref> as it has the proper separation from the metallic Al peak. With the subsequent deposition, a new peak located at 73.24 eV appears at 8 &#197;, which can be attributed to metallic aluminum. The coverage agrees with the emergence of the Al Fermi edge in the UPS spectrum. Based on the UPS data, the most logical assumption is that the formation of aluminum oxides and Al reacts with BP at the interface which causes changes in VL. Fig. <ref type="figure">3(c)</ref> shows the atomic concentration of all components as a function of Al thickness. To distinguish different components, the Al 2p-related peaks located at ca. 73.24 eV, 74.24 eV, and 75.72 eV is assigned to metallic Al, Al-BP compounds, and AlO x respectively. The amount of BP decreases monotonically as the Al thickness increases. The AlO x and O behave differently from BP, their intensities increase first and then decrease gradually with the Al thickness increase. The amount of metallic Al gradual increases as the Al thickness increases. Al-BP compounds intensities decrease obviously after 8 &#197;, indicating that the reaction only occurs at 0-8 &#197;. The Al-P compounds exists at the Al/BP interface, in which should change the optical properties at the interface region. However, it should be noted that this region is limited to a few nanometers in thickness, as the unreacted BP is still dominant. Combine with the UPS spectra (Fig. <ref type="figure">2c</ref>), we find that the interface barrier has been changed by the reaction, which is not conducive to carrier transport. To eliminate the reaction and suppress the interface barrier, the buffer layer is needed between Al and BP.</p><p>To further study the growth process of Al on BP film, we analyzed the attenuation of XPS intensity by Al overlayer (I Al ) <ref type="bibr">[38]</ref>. (2) I 0 is the photoelectron intensities from intrinsic BP, I 60 is from 60 &#197; Al overlayer. d is the thickness of the Al film deposition, &#955; Al (&#955; BP ) is the mean free path (MFP) of photoexcited electrons in Al (P) <ref type="bibr">[35]</ref>. The growth pattern of Al deposited on the BP substrate can be obtained by the attenuation of the XPS peaks, which calculated by the Eqs. ( <ref type="formula">1</ref>) and (2) <ref type="bibr">[39]</ref>. As shown in <ref type="bibr">Fig. 3 (d)</ref>, between 1 and 8 &#197;, the curve of P 2p peak attenuation is linear, 8-60 &#197;, linear has slightly different slopes. This date derives an electron escape depth of ~20 &#197;, which is in good agreement with the expected value <ref type="bibr">[40]</ref>. It is suggesting that as Al is deposited onto the BP film, the growth pattern is Stranski-Krastanov mode.</p><p>To analyze the distribution of all components, AR-XPS is used for  These depth observations support our assertion that Al-P compounds only exists at the interface region, which suggests that the Al react with the top layers of BP. Thus, we speculate that a monolayer BP may show a similar behavior as the bulk BP and be damaged by the reaction although it may deserve further investigations.</p></div>
<div xmlns="http://www.tei-c.org/ns/1.0"><head>Conclusions</head><p>We investigated the electronic properties of the Al/BP interface and found that there is a reaction between Al and BP. Al-P compounds were formed at the initial Al deposition and it only exists at the interface region. The interface interaction would change the interface barrier and against the carriers transport. It is suggested that a buffer layer inset into the Al/BP interface is necessary. The process of the growth of Al on the BP substrate is Stranski-Krastanov mode. These observations are helpful for the performance improvement of Al/BP-based devices. </p></div>
<div xmlns="http://www.tei-c.org/ns/1.0"><head>CRediT authorship contribution statement</head></div></body>
		</text>
</TEI>
