Review of selected fundamental topics on the interaction between phase transformations, fracture, and other structural changes in inelastic materials is presented. It mostly focuses on the concepts developed in the author's group over last three decades and numerous papers that affected us. It includes a general thermodynamic and kinetic theories with sharp interfaces and within phase field approach. Numerous analytical (even at large strains) and numerical solutions illustrate the main features of the developed theories and their application to the real phenomena. Coherent, semicoherent, and noncoherent interfaces, as well as interfaces with decohesion and with intermediate liquid (disordered) phase are discussed. Importance of the surface- and scale-induced phenomena on interaction between phase transformation with fracture and dislocations as well as inheritance of dislocations and plastic strains is demonstrated. Some nontrivial phenomena, like solid-solid phase transformations via intermediate (virtual) melt, virtual melting as a new mechanism of plastic deformation and stress relaxation under high strain rate loading, and phase transformations and chemical reactions induced by plastic shear under high pressure are discussed and modeled.
more »
« less
Scaling of relaxation and excess entropy in plastically deformed amorphous solids
When stressed sufficiently, solid materials yield and deform plastically via reorganization of microscopic constituents. Indeed, it is possible to alter the microstructure of materials by judicious application of stress, an empirical process utilized in practice to enhance the mechanical properties of metals. Understanding the interdependence of plastic flow and microscopic structure in these nonequilibrium states, however, remains a major challenge. Here, we experimentally investigate this relationship, between the relaxation dynamics and microscopic structure of disordered colloidal solids during plastic deformation. We apply oscillatory shear to solid colloidal monolayers and study their particle trajectories as a function of shear rate in the plastic regime. Under these circumstances, the strain rate, the relaxation rate associated with plastic flow, and the sample microscopic structure oscillate together, but with different phases. Interestingly, the experiments reveal that the relaxation rate associated with plastic flow at time t is correlated with the strain rate and sample microscopic structure measured at earlier and later times, respectively. The relaxation rate, in this nonstationary condition, exhibits power-law, shear-thinning behavior and scales exponentially with sample excess entropy. Thus, measurement of sample static structure (excess entropy) provides insight about both strain rate and constituent rearrangement dynamics in the sample at earlier times.
more »
« less
- Award ID(s):
- 2003659
- PAR ID:
- 10230898
- Date Published:
- Journal Name:
- Proceedings of the National Academy of Sciences
- Volume:
- 117
- Issue:
- 22
- ISSN:
- 0027-8424
- Page Range / eLocation ID:
- 11887 to 11893
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Current best practices for the assessment of the cyclic response of plastic silts are centered on the careful sampling and cyclic testing of natural, intact specimens. Side-by-side evaluation of in-situ and laboratory element test responses are severely limited, despite the need to establish similarities and differences in their characteristics. In this paper, a coordinated laboratory and field-testing campaign that was undertaken to compare the strain-controlled cyclic response of a plastic silt deposit at the Port of Longview, Longview, WA is described. Following a discussion of the subsurface conditions at one of several test panels, the responses of laboratory test specimens to resonant column and cyclic torsional shear testing, and constant-volume, strain-controlled cyclic direct simple shear testing are described in terms of shear modulus nonlinearity and degradation, and excess pore pressure generation with shear strain. Several months earlier, the in-situ cyclic response of the same deposit was investigated by applying a range of shear strain amplitudes using a large mobile shaker. The in-situ response is presented and compared to the laboratory test results, highlighting similarities and differences arising from differences in mechanical (e.g., constant-volume shearing; strain rate-effects) and hydraulic (e.g., local drainage) boundary conditions and the spatial variability of natural soil deposits.more » « less
-
Linking the macroscopic flow properties and nanoscopic structure is a fundamental challenge to understanding, predicting, and designing disordered soft materials. Under small stresses, these materials are soft solids, while larger loads can lead to yielding and the acquisition of plastic strain, which adds complexity to the task. In this work, we connect the transient structure and rheological memory of a colloidal gel under cyclic shearing across a range of amplitudes via a generalized memory function using rheo-X-ray photon correlation spectroscopy (rheo-XPCS). Our rheo-XPCS data show that the nanometer scale aggregate-level structure recorrelates whenever the change in recoverable strain over some interval is zero. The macroscopic recoverable strain is therefore a measure of the nano-scale structural memory. We further show that yielding in disordered colloidal materials is strongly heterogeneous and that memories of prior deformation can exist even after the material has been subjected to flow.more » « less
-
Strain localization in granular materials is commonly identified from kinematic signatures: intense shear strain, enhanced grain rotations, and local dilation or compaction. Yet failure in granular media is governed not only by grain kinematics, but also by how stress and mechanical work are distributed across localization zones and the surrounding material. Measuring these quantities in 3D, opaque granular materials has remained difficult, limiting experimental tests of localization theories based on constitutive softening and non-coaxiality. Here we combined X-ray computed tomography (XRCT) and 3D X-ray diffraction (3DXRD) to measure grain-scale kinematics, grain-resolved stress tensors, stress orientations, and local mechanical work during triaxial compression of sand-like quartz at 10 MPa confining pressure and natural sand at 15 MPa confining pressure. Analysis revealed (a) compactive shear bands that exhibited constitutive behavior similar to the surrounding bulk material, but approached critical state and accumulated plastic flow earlier, (b) minimal non-coaxiality between stress and strain rate, and (c) significantly elevated plastic work within shear bands, providing a signature of localization comparable to kinematics. This study provides critical new experimental constraints for constitutive models capturing localization in granular media and pushes our experimental understanding of localization zones beyond kinematics. It complements prior kinematic-only analysis of localization zones and prior studies of grain stresses in smaller samples containing only a few thousand grains with data from samples containing over 29,000 grains.more » « less
-
Abstract Glass transition is one of the unresolved critical issues in solid-state physics and materials science, during which a viscous liquid is frozen into a solid or structurally arrested state. On account of the uniform arrested mechanism, the calorimetric glass transition temperature ( T g ) always follows the same trend as the dynamical glass transition (or α -relaxation) temperature ( T α ) determined by dynamic mechanical analysis (DMA). Here, we explored the correlations between the calorimetric and dynamical glass transitions of three prototypical high-entropy metallic glasses (HEMGs) systems. We found that the HEMGs present a depressed dynamical glass transition phenomenon, i.e ., HEMGs with moderate calorimetric T g represent the highest T α and the maximum activation energy of α -relaxation. These decoupled glass transitions from thermal and mechanical measurements reveal the effect of high configurational entropy on the structure and dynamics of supercooled liquids and metallic glasses, which are associated with sluggish diffusion and decreased dynamic and spatial heterogeneities from high mixing entropy. The results have important implications in understanding the entropy effect on the structure and properties of metallic glasses for designing new materials with plenteous physical and mechanical performances.more » « less
An official website of the United States government

