Dissipative Kerr solitons in resonant frequency combs offer a promising route for ultrafast mode-locking, precision spectroscopy and time-frequency standards. The dynamics for the dissipative soliton generation, however, are intrinsically intertwined with thermal nonlinearities, limiting the soliton generation parameter map and statistical success probabilities of the solitary state. Here, via use of an auxiliary laser heating approach to suppress thermal dragging dynamics in dissipative soliton comb formation, we demonstrate stable Kerr soliton singlet formation and soliton bursts. First, we access a new soliton existence range with an inverse-sloped Kerr soliton evolution—diminishing soliton energy with increasing pump detuning. Second, we achieve deterministic transitions from Turing-like comb patterns directly into the dissipative Kerr soliton singlet pulse bypassing the chaotic states. This is achieved by avoiding subcomb overlaps at lower pump power, with near-identical singlet soliton comb generation over twenty instances. Third, with the red-detuned pump entrance route enabled, we uncover unique spontaneous soliton bursts in the direct formation of low-noise optical frequency combs from continuum background noise. The burst dynamics are due to the rapid entry and mutual attraction of the pump laser into the cavity mode, aided by the auxiliary laser and matching well with our numerical simulations. Enabled by the auxiliary-assisted frequency comb dynamics, we demonstrate an application of automatic soliton comb recovery and long-term stabilization against strong external perturbations. Our findings hold potential to expand the parameter space for ultrafast nonlinear dynamics and precision optical frequency comb stabilization.
We experimentally demonstrate a pump-pulse-induced conversion of noise into solitons in multimode optical fibers. The process is based on the recently discovered phenomenon of soliton self-mode conversion, where a pump soliton in a higher-order spatial mode crafts another well-defined soliton, originating purely from noise, in a lower-order mode at a longer wavelength through intermodal Raman scattering. The lack of the need for any seed or cavity feedback demonstrates that soliton self-mode conversion is a fundamentally unavoidable, but nevertheless tailorable and hence useful, self-organizing nonlinear optical effect capable of turning noise into transform limited solitons.
more » « less- NSF-PAR ID:
- 10231832
- Publisher / Repository:
- Optical Society of America
- Date Published:
- Journal Name:
- Optics Express
- Volume:
- 29
- Issue:
- 12
- ISSN:
- 1094-4087; OPEXFF
- Page Range / eLocation ID:
- Article No. 18315
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
Abstract -
more » « less
We show that a soliton in a high-order spatial mode of a multi-mode fiber can completely lose its shot-to-shot coherence due to a noise seed with energy orders of magnitude below that of the soliton. The total degradation of shot-to-shot coherence is caused by a very strong recently demonstrated intermodal nonlinear effect, soliton self-mode conversion. The results indicate that the robustness of solitons against perturbations is not entirely applicable in the presence of intermodal nonlinearities, and, more generally, that certain single-mode results cannot be trivially extrapolated to multi-mode fibers.
-
more » « less
Abstract The advantages of low cost, compact size, and reduced power consumption makes a photonic chip‐based ultrafast laser source an appealing technology for diverse applications such as all‐optical signal processing, frequency metrology, spectroscopy, and sensing. To date, on‐chip ultrafast sources are typically generated by microresonator‐based Kerr‐comb solitons, which require precise phase tuning and frequency agile lasers to access the soliton state. Here, this work reports the first experimental demonstration of an externally pumped on‐chip ultrafast soliton laser source based on Raman soliton self‐frequency shift. By capitalizing on strong optical nonlinearity and versatile dispersion control in Ge28Sb12Se60chalcogenide glass waveguides, 185 fs duration Raman soliton generation has been demonstrated, possessing continuous wavelength tunability from 1589 to 1807 nm with signal‐to‐noise ratios consistently exceeding 65 dB. The source operates with pump pulse energies as low as 1.08 pJ, representing over three orders of magnitude improvement compared to fiber‐based Raman soliton sources. In addition, the generated solitons exhibit excellent spectral purity and stability free from parasitic sidebands. These experimental results are further validated by theoretical analysis, revealing insights into the soliton dynamics and critical device design guidelines. This work therefore enables a new class of broadly tunable, energy‐efficient, compact, and potentially cost‐effective on‐chip ultrafast laser sources.
-
more » « less
Abstract Millimetre-wave (mmWave) technology continues to draw great interest due to its broad applications in wireless communications, radar, and spectroscopy. Compared to pure electronic solutions, photonic-based mmWave generation provides wide bandwidth, low power dissipation, and remoting through low-loss fibres. However, at high frequencies, two major challenges exist for the photonic system: the power roll-off of the photodiode, and the large signal linewidth derived directly from the lasers. Here, we demonstrate a new photonic mmWave platform combining integrated microresonator solitons and high-speed photodiodes to address the challenges in both power and coherence. The solitons, being inherently mode-locked, are measured to provide 5.8 dB additional gain through constructive interference among mmWave beatnotes, and the absolute mmWave power approaches the theoretical limit of conventional heterodyne detection at 100 GHz. In our free-running system, the soliton is capable of reducing the mmWave linewidth by two orders of magnitude from that of the pump laser. Our work leverages microresonator solitons and high-speed modified uni-traveling carrier photodiodes to provide a viable path to chip-scale, high-power, low-noise, high-frequency sources for mmWave applications.
-
more » « less
Optical parametric amplification is one of the most flexible approaches for generating coherent light at long wavelengths, but typical implementations require prohibitively large pump pulse energies to realize useful amounts of gain. In this work, we experimentally demonstrate an approach to optical parametric amplification in which an interplay between parametric gain and symmetric temporal walk-off confines the non-degenerate signal and idler to form a three-wave soliton. Gain-trapped solitons propagate stably over arbitrarily long interaction lengths, which reduces the energy required for high-gain operation by orders of magnitude. The devices demonstrated here realize large parametric gains (>70dB) with only picojoules of pump pulse energy in a 5-mm-long thin-film lithium niobate on sapphire nanowaveguide. In addition, we observe an array of desirable features including high conversion efficiencies (>50%), wide tuning ranges (>100nm), and broad spectral bandwidths (>180nm 3 dB for the 3200-nm idler). When combined with the dispersion engineering available in tightly confining nanowaveguides, this approach enables high-gain optical parametric amplifiers operating at any wavelength.
