skip to main content


Title: Thermally Drawn Stretchable Electrical and Optical Fiber Sensors for Multimodal Extreme Deformation Sensing
Abstract

Highly stretchable fiber sensors have attracted significant interest recently due to their applications in wearable electronics, human–machine interfaces, and biomedical implantable devices. Here, a scalable approach for fabricating stretchable multifunctional electrical and optical fiber sensors using a thermal drawing process is reported. The fiber sensors can sustain at least 580% strain and up to 750% strain with a helix structure. The electrical fiber sensor simultaneously exhibits ultrahigh stretchability (400%), high gauge factors (≈1960), and excellent durability during 1000 stretching and bending cycles. It is also shown that the stretchable step‐index optical fibers facilitate detection of bending and stretching deformation through changes in the light transmission. By combining both electrical and optical detection schemes, multifunctional fibers can be used for quantifying and distinguishing multimodal deformations such as bending and stretching. The fibers’ utility and functionality in sensing and control applications are demonstrated in a smart glove for controlling a virtual hand model, a wrist brace for wrist motion tracking, fiber meshes for strain mapping, and real‐time monitoring of multiaxial expansion and shrinkage of porcine bladders. These results demonstrate that the fiber sensors can be promising candidates for smart textiles, robotics, prosthetics, and biomedical implantable devices.

 
more » « less
Award ID(s):
1847436
NSF-PAR ID:
10452605
Author(s) / Creator(s):
 ;  ;  ;  ;  ;  ;  ;  ;  ;  ;  ;  ;  
Publisher / Repository:
Wiley Blackwell (John Wiley & Sons)
Date Published:
Journal Name:
Advanced Optical Materials
Volume:
9
Issue:
6
ISSN:
2195-1071
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Abstract

    The design of advanced materials with coupled optical and mechanical properties is an important challenge in materials science; especially, the implementation of soft materials in optics has recently gained significant interest. Soft optical systems are particularly versatile in sensing, where large and repeated deformations require dynamically responsive materials. Here, stretchable step‐index optical fibers, which are capable of reversibly sustaining strains of up to 300% while guiding light, are demonstrated. A continuous and scalable melt‐flow process is used to coextrude two thermoplastic elastomers, thereby forming the fibers' high index core‐low index cladding structure. Deformation of the fibers through stretching, bending, and indentation induces detectable, predictable, reversible, and wavelength‐dependent changes in light transmission. Quantitative knowledge about the coupling of the fibers' mechanical and optical properties forms the basis for the design of fiber‐based sensors that are capable of reliably assessing extreme mechanical stimuli. The fibers utility in sensing scenarios is demonstrated in a knee brace for continuous knee motion tracking, a glove for control of a virtual hand model, and a tennis racket capable of locating ball impacts. Such devices can greatly improve quantitative assessment of human motion in rehabilitation, sports, and anywhere else where large deformations need to be monitored reliably.

     
    more » « less
  2. Abstract

    The bladder, stomach, intestines, heart, and lungs all move dynamically to achieve their purpose. A long‐term implantable device that can attach onto an organ, sense its movement, and deliver current to modify the organ function would be useful in many therapeutic applications. The bladder, for example, can suffer from incomplete contractions that result in urinary retention with patients requiring catheterization. Those affected may benefit from a combination of a strain sensor and electrical stimulator to better control bladder emptying. The materials and design of such a device made from thin layer carbon nanotube (CNT) and Ecoflex 00–50 are described and demonstrate its function with in vivo feline bladders. During bench‐top characterization, the resistive and capacitive sensors exhibit stability throughout 5000 stretching cycles under physiology conditions. In vivo measurements with piezoresistive devices show a high correlation between sensor resistance and volume. Stimulation driven from platinum‐silicone composite electrodes successfully induce bladder contraction. A method for reliable connection and packaging of medical grade wire to the CNT device is also presented. This work is an important step toward the translation of low‐durometer elastomers, stretchable CNT percolation, and platinum‐silicone composite, which are ideal for large‐strain bioelectric applications to sense or modulate dynamic organ states.

     
    more » « less
  3. Abstract

    The technological promise of soft devices—wearable electronics, implantables, soft robotics, sensors—has accelerated the demand for deformable energy sources. Devices that can convert mechanical energy to electrical energy can enable self‐powered, tetherless, and sustainable devices. This work presents a completely soft and stretchable (>400% strain) energy harvester based on variable‐area electrical‐double‐layer (EDL) capacitors (≈40 µF cm−2). Mechanically varying the EDL area, and thus the capacitance, disrupts equilibrium and generates a driving force for charge movement through an external circuit. Prior EDL capacitors varied the contact area by depressing water droplets between rigid electrodes. In contrast, here, the harvester consists of liquid‐metal electrodes encased in a hydrogel. Deforming the device by ≈25% strain generates a power density ≈0.5 mW m−2. This unconventional approach is attractive because: (1) it does not need an external voltage supply to provide charge; (2) the electrodes themselves deform; and (3) it can work under various modes of deformation such as pressing, stretching, bending, and twisting. The unique ability of the harvester to operate underwater shows promising applications in wearables that contact sweat, underwater sensing, and blue energy harvesting.

     
    more » « less
  4. Abstract

    Fiber-based electronics enabling lightweight and mechanically flexible/stretchable functions are desirable for numerous e-textile/e-skin optoelectronic applications. These wearable devices require low-cost manufacturing, high reliability, multifunctionality and long-term stability. Here, we report the preparation of representative classes of 3D-inorganic nanofiber network (FN) films by a blow-spinning technique, including semiconducting indium-gallium-zinc oxide (IGZO) and copper oxide, as well as conducting indium-tin oxide and copper metal. Specifically, thin-film transistors based on IGZO FN exhibit negligible performance degradation after one thousand bending cycles and exceptional room-temperature gas sensing performance. Owing to their great stretchability, these metal oxide FNs can be laminated/embedded on/into elastomers, yielding multifunctional single-sensing resistors as well as fully monolithically integrated e-skin devices. These can detect and differentiate multiple stimuli including analytes, light, strain, pressure, temperature, humidity, body movement, and respiratory functions. All of these FN-based devices exhibit excellent sensitivity, response time, and detection limits, making them promising candidates for versatile wearable electronics.

     
    more » « less
  5. Abstract

    For wearable and implantable electronics applications, developing intrinsically stretchable polymer semiconductor is advantageous, especially in the manufacturing of large‐area and high‐density devices. A major challenge is to simultaneously achieve good electrical and mechanical properties for these semiconductor devices. While crystalline domains are generally needed to achieve high mobility, amorphous domains are necessary to impart stretchability. Recent progresses in the design of high‐performance donor–acceptor polymers that exhibit low degrees of energetic disorder, while having a high fraction of amorphous domains, appear promising for polymer semiconductors. Here, a low crystalline, i.e., near‐amorphous, indacenodithiophene‐co‐benzothiadiazole (IDTBT) polymer and a semicrystalline thieno[3,2‐b]thiophene‐diketopyrrolopyrrole (DPPTT) are compared, for mechanical properties and electrical performance under strain. It is observed that IDTBT is able to achieve both a high modulus and high fracture strain, and to preserve electrical functionality under high strain. Next, fully stretchable transistors are fabricated using the IDTBT polymer and observed mobility ≈0.6 cm2V−1s−1at 100% strain along stretching direction. In addition, the morphological evolution of the stretched IDTBT films is investigated by polarized UV–vis and grazing‐incidence X‐ray diffraction to elucidate the molecular origins of high ductility. In summary, the near‐amorphous IDTBT polymer signifies a promising direction regarding molecular design principles toward intrinsically stretchable high‐performance polymer semiconductor.

     
    more » « less