The anisotropy in the shape of polymeric particles has been demonstrated to have many advantages over spherical particulates, including bio‐mimetic behavior, shaped‐directed flow, deformation, surface adhesion, targeting, motion, and permeability. The layer‐by‐layer (LbL) assembly is uniquely suited for synthesizing anisotropic particles as this method allows for simple and versatile replication of diverse colloid geometries with precise control over their chemical and physical properties. This review highlights recent progress in anisotropic particles of micrometer and nanometer sizes produced by a templated multilayer assembly of synthetic and biological macromolecules. Synthetic approaches to produce capsules and hydrogels utilizing anisotropic templates such as biological, polymeric, bulk hydrogel, inorganic colloids, and metal–organic framework crystals as sacrificial templates are overviewed. Structure‐property relationships controlled by the anisotropy in particle shape and surface are discussed and compared with their spherical counterparts. Advances and challenges in controlling particle properties through varying shape anisotropy and surface asymmetry are outlined. The perspective applications of anisotropic colloids in biomedicine, including programmed behavior in the blood and tissues as artificial cells, nano‐motors/sensors, and intelligent drug carriers are also discussed.
The dynamic manipulation of colloidal particle shape offers a novel design mechanism for the creation of advanced responsive materials. To this end, we introduce a versatile new strategy for shape control of anisotropic polymeric colloidal particles. The concept utilizes temperature‐sensitive absorption of a suitable solvent from a binary mixture. Specifically, increasing the temperature in the vicinity of the demixing transition of a binary mixture causes more solvent to be absorbed into the polymeric colloidal particle, which, in turn, lowers the glass transition temperature of the polymer inside the particle, with a concomitant decrease in viscosity. The balance between the internal viscosity and surface tension of the particle is thus disrupted, and the anisotropic shape of the particle shifts to become more spherical. Subsequent rapid temperature quenching can halt the process, leaving the particle with an intermediate anisotropy. The resultant shape anisotropy control provides new routes for studies of the phase transitions of anisotropic colloids and enables the fabrication of unique particles for materials applications.
more » « less- NSF-PAR ID:
- 10236037
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Angewandte Chemie
- Volume:
- 128
- Issue:
- 34
- ISSN:
- 0044-8249
- Page Range / eLocation ID:
- p. 10106-10109
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
Abstract -
Flow-based manipulation of particles is an essential tool for studying soft materials, but prior work has nearly exclusively relied on using two-dimensional (2D) flows generated in planar microfluidic geometries. In this work, we demonstrate 3D trapping and manipulation of freely suspended particles, droplets, and giant unilamellar vesicles in 3D flow fields using automated flow control. Three-dimensional flow fields including uniaxial extension and biaxial extension are generated in 3D-printed fluidic devices combined with active feedback control for particle manipulation in 3D. Flow fields are characterized using particle tracking velocimetry complemented by finite-element simulations for all flow geometries. Single colloidal particles (3.4 μm diameter) are confined in low viscosity solvent (1.0 mPa s) near the stagnation points of uniaxial and biaxial extensional flow for long times (≥10 min) using active feedback control. Trap stiffness is experimentally determined by analyzing the power spectral density of particle position fluctuations. We further demonstrate precise manipulation of colloidal particles along user-defined trajectories in three dimensions using automated flow control. Newtonian liquid droplets and GUVs are trapped and deformed in precisely controlled uniaxial and biaxial extensional flows, which is a new demonstration for 3D flow fields. Overall, this work extends flow-based manipulation of particles and droplets to three dimensions, thereby enabling quantitative analysis of colloids and soft materials in complex nonequilibrium flows.more » « less
-
null (Ed.)Entropically driven self-assembly of hard anisotropic particles, where particle shape gives rise to emergent valencies, provides a useful perspective for the design of nanoparticle and colloidal systems. Hard particles self-assemble into a rich variety of crystal structures, ranging in complexity from simple close-packed structures to structures with 432 particles in the unit cell. Entropic crystallization of open structures, however, is missing from this landscape. Here, we report the self-assembly of a two-dimensional binary mixture of hard particles into an open host–guest structure, where nonconvex, triangular host particles form a honeycomb lattice that encapsulates smaller guest particles. Notably, this open structure forms in the absence of enthalpic interactions by effectively splitting the structure into low- and high-entropy sublattices. This is the first such structure to be reported in a two-dimensional athermal system. We discuss the observed compartmentalization of entropy in this system, and show that the effect of the size of the guest particle on the stability of the structure gives rise to a reentrant phase behavior. This reentrance suggests the possibility for a reconfigurable colloidal material, and we provide a proof-of-concept by showing the assembly behavior while changing the size of the guest particles in situ . Our findings provide a strategy for designing open colloidal crystals, as well as binary systems that exhibit co-crystallization, which have been elusive thus far.more » « less
-
more » « less
Abstract Electrophoretic deposition (EPD) of colloidal particles is a practical system for the study of crystallization and related physical phenomena. The aggregation is driven by the electroosmotic flow fields and induced dipole moments generated by the polarization of the electrode‐particle‐electrolyte interface. Here, the electrochemical control of aggregation and repulsion in the electrophoretic deposition of colloidal microspheres is reported. The nature of the observed transition depended on the composition of the solvent, switching from electrode‐driven aggregation in water to electrical field‐driven repulsion in ethanol for otherwise identical systems of colloidal microspheres. This work uses optical microscopy‐derived particles and a recently developed particle insertion method approach to extract model‐free, effective interparticle potentials to describe the ensemble behavior of the particles as a function of the solvent and electrode potential at the electrode interface. This approach can be used to understand the phase behavior of these systems based on the observable particle positions rather than a detailed understanding of the electrode‐electrolyte microphysics. This approach enables simple predictability of the static and dynamic behaviors of functional colloid‐electrode interfaces.
-
more » « less
Abstract Capillary assembly is a versatile method for depositing colloidal particles within templates, resulting in nano/microarrays and colloidal superstructures for optical, plasmonic, and sensory applications. Liquid particles (LPs), comprised of oligomerized 3‐(trimethoxysilyl)propyl methacrylate, are herein shown to deposit into patterned cavities via capillary assembly. In contrast to solid colloids, LPs coalesce upon solvent evaporation and assume the geometry of the template. Incorporating small molecules such as dyes followed by LP solidification generates fluorescent polymer microarrays of any geometry. The LP size is inversely proportional to the quantity of deposited material and the convexity of the final polymer array. Cavity filling can be tuned by increasing the assembly temperature. Extraction of the polymerized regions produces solidified particles with faceted shapes including square prisms, trapezoids, and ellipsoids with sizes up to 14 µm that retain the shape of the cavity in which they are initially held. LP deposition thus presents a highly controllable fabrication scheme for geometrically diverse polymer microarrays and anisotropic colloids of any conceivable polygonal shape due to space filling of the template. The extension of capillary assembly to LPs that can be doped with small molecule dyes and analytes invaluably expands the synthetic toolbox for top‐down, scalable, hierarchically engineered materials.
