An official website of the United States government
Models of subduction zone magmatism ascribe the andesitic composition of arc magmas to crustal processes, such as crustal assimilation and/or fractional crystallization, that basaltic mantle melts experience during their ascent through the upper plate crust. However, results from time series study of olivine-phyric high-Nb basalts and basaltic andesites from two monogenetic arc volcanoes (V. Chichinautzin and Texcal Flow) that are constructed on the ~45 km thick continental basement of the central Transmexican Volcanic Belt (TMVB) are inconsistent with this model. Instead, ratios of radiogenic isotope and incompatible trace elements suggest that these volcanoes were constructed through multiple individual melt batches ascending from a progressively changing mantle source. Moreover, the high Ni contents of the olivine phenocrysts, together with their high mantle-like 3He/4Heoliv =7-8 Ra with high crustal δ18O oliv = +5.5 to +6.5‰ (n=12) point to the presence of secondary ‘reaction pyroxenites’ in the mantle source that create primary silicic arc magmas through melt-rock reaction processes in the mantle [1, 2] . Here we present additional trace element concentration of the high-Ni olivines by electron microprobe (Mn, Ca) and laser-ablation ICPMS (Li, Cr and V) analysis in order to test this model. Olivine Li (2-7 ppm) and Mn (1170- 2810 ppm) increase with decreasing fosterite (Fo89 to Fo75), while Cr (29-364 ppm), V (4-11 ppm) and Ca (825-2390 ppm) decrease. Quantitative modeling shows that these trends in their entirety cannot be controlled by fractional crystallization under variable melt water H2O or oxygen fugacity (fO2), or co-crystallization of Cr-spinel. Instead, the variations support the existence of compositionally distinct melt batches during earliest melt evolution. Moreover, the trace element trends are qualitatively consistent with a model of progressive source depletion by serial melting (shown in olivine Ca, V and Cr) that is triggered by the repetitive addition of silicic slab components (shown by olivine Li). These findings suggest mantle source variations are not eliminated despite the thick crust these magmas pass during ascent. [1] Straub et al. (2013) J Petrol 54 (4): 665-701; [2] Straub et al. (2015) Geochim Cosmochim Acta 166: 29-52.
more »
« less
Out-of-sequence skeletal growth causing oscillatory zoning in arc olivines
Abstract Primitive olivines from the monogenetic cones Los Hornitos, Central-South Andes, preserve dendritic, skeletal, and polyhedral growth textures. Consecutive stages of textural maturation occur along compositional gradients where high Fo–Ni cores of polyhedral olivines (Fo 92.5 , Ni ~3500 ppm) contrast with the composition of dendritic olivines (Fo < 91.5, Ni < 3000 ppm), indicating sequential nucleation. Here we present a new growth model for oscillatory Fo–Ni olivine zoning that contrasts with the standard interpretation of continuous, sequential core-to-rim growth. Olivine grows rapidly via concentric addition of open-structured crystal frames, leaving behind compositional boundary layers that subsequently fill-in with Fo–Ni-depleted olivine, causing reversals. Elemental diffusion modeling reveals growth of individual crystal frames and eruption at the surface occurred over 3.5–40 days. Those timescales constrain magma ascent rates of 40–500 m/h (0.011 to 0.14 m/s) from the deep crust. Compared to ocean island basalts, where dendritic and skeletal olivines have been often described, magmas erupted at arc settings, experiencing storage and degassing, may lack such textures due to fundamentally different ascent histories.
more »
« less
- Award ID(s):
- 1426820
- PAR ID:
- 10273226
- Date Published:
- Journal Name:
- Nature Communications
- Volume:
- 12
- Issue:
- 1
- ISSN:
- 2041-1723
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Recharges of magma underneath basaltic volcanoes can occur as precursory events prior to an eruption but are not always revealed in geophysical data streams or erupted lavas compositions. In contrast, phosphorus within primitive, Mg‐rich (Fo89‐90), olivine can preserve recharge information lost by the mixed melt. Evidence of rapid growth and dissolution are preserved only in phosphorus X‐ray intensity maps, which reveal that Mg‐rich olivine from eruptions occurring between 2008 and 2020 at Kīlauea Volcano (Hawaiʻi) experienced at least two episodes of magma intrusion. We develop numerical diffusion models that evaluate the fidelity of the Fe‐Mg compositional archive by quantifying three factors that influence Fo population distributions: (a) the frequency at which an Mg‐rich basaltic liquid (in equilibrium with Fo90olivine) intrudes the reservoir, (b) the pre‐existence of a polymodal distribution of olivine crystal sizes and their shapes (c) the effects of sectioning on apparent olivine core compositions. We find that most crystals lose their initial Mg‐rich composition if they are held at temperatures relevant to summit magma storage conditions (1,160–1,190°C) for more than 10 years. Thus, previous assertions that Mg‐rich olivine crystals at Kīlauea are scavenged from centuries‐old stored magmas are unrealistic. Our method permits critical evaluation of contrasting explanations of heterogeneous Fe‐Mg contents of olivine cargo: (a) different total durations of mush storage with partial diffusive erasure of compositional traits, or (b) coexistence of multiple chemically distinct magmas. Our approach provides general guidance for the conservative interpretation of temporal information preserved within olivine Fe‐Mg compositional archives.more » « less
-
Abstract The Quaternary Big Pine (BP) volcanic field in eastern California is notable for the occurrence of mantle xenoliths in several flows. This points to rapid ascent of basalt through the crust and precludes prolonged storage in a crustal reservoir. In this study, the hypothesis of phenocryst growth during ascent is tested for several basalts (13–7 wt% MgO) and shown to be viable. Phenocrysts of olivine and clinopyroxene frequently display diffusion‐limited growth textures, and clinopyroxene compositions are consistent with polybaric crystallization. When the most Mg‐rich olivine in each sample is paired with the whole‐rock composition, resulting(olivine‐melt) values (0.31–0.36) match those calculated from literature models (0.32–0.36). Application of a Mg‐ and a Ni‐based olivine‐melt thermometer from the literature, both calibrated on the same experimental data set, leads to two sets of temperatures that vary linearly with whole‐rock MgO wt%. Because the Ni thermometer is independent of water content, it provides the actual temperature at the onset of olivine crystallization (1247–1097°C), whereas the Mg thermometer gives the temperature under anhydrous conditions and thus allows ΔT(=TMg − TNi = depression of liquidus due to water) to be obtained. The average ΔTfor all samples is ~59°C, which is consistent with analyzed water contents of 1.5–3.0 wt% in olivine‐hosted melt inclusions from the literature. Because the application of olivine‐melt thermometry/hygrometry at the liquidus only requires microprobe analyses of olivine combined with whole‐rock compositions, it can be used to obtain large global data sets of the temperature and water contents of basalts from different tectonic settings.more » « less
-
Abstract We investigated the state of the arc background mantle (i.e. mantle wedge without slab component) by means of olivine CaO and its Cr-spinel inclusions in a series of high-Mg# volcanic rocks from the Quaternary Trans-Mexican Volcanic Belt. Olivine CaO was paired with the Cr# [molar Cr/(Cr + Al) *100] of Cr-spinel inclusions, and 337 olivine+Cr-spinel pairs were obtained from 33 calc-alkaline, high-K and OIB-type arc front volcanic rocks, and three monogenetic rear-arc basalts that lack subduction signatures. Olivine+Cr-spinels display coherent elemental and He–O isotopic systematics that contrast with the compositional diversity of the bulk rocks. All arc front olivines have low CaO (0.135 ± 0.029 wt %) relative to rear-arc olivines which have the higher CaO (0.248 ± 0.028 wt %) of olivines from mid-ocean ridge basalts. Olivine 3He/4He–δ18O isotope systematics confirm that the olivine+Cr-spinels are not, or negligibly, affected by crustal basement contamination, and thus preserve compositional characteristics of primary arc magmas. Variations in melt H2O contents in the arc front series and the decoupling of olivine CaO and Ni are inconsistent with controls on the olivine CaO by melt water and/or secondary mantle pyroxenites. Instead, we propose that low olivine CaO reflects the typical low melt CaO of high-Mg# arc magmas erupting through thick crust. We interpret the inverse correlation of olivine CaO and Cr-spinel Cr# over a broad range of Cr# (~10–70) as co-variations of CaO, Al and Cr of their (near) primary host melts, which derived from a mantle that has been variably depleted by slab-flux driven serial melt extraction. Our results obviate the need for advecting depleted residual mantle from rear- and back-arc region, but do not upset the larger underlying global variations of melt CaO high-Mg# arc magmas worldwide, despite leading to considerable regional variations of melt CaO at the arc front of the Trans-Mexican Volcanic Belt.more » « less
-
Abstract We investigated the early stages of olivine crystal growth via in situ seeded experiments in a single plagioclase-hosted melt inclusion, using a heating stage microscope. Each experiment was subjected to a cooling ramp of 7800°C/h followed by an isothermal dwell at 19°C, 38°C, 57°C, 77°C, 96°C or 129°C of undercooling. The seeds (6–16 μm in diameter Ø) grew into large crystals (Ø 80–169 μm) in 3 to 30 min through the symmetrical development of tabular, skeletal, and dendritic overgrowths as the undercooling of the system increased. Time-resolved image processing and incremental measurements of the overgrowth thicknesses indicate up to three stages of crystal growth: an acceleration stage, a linear (constant growth rate) stage, and a deceleration stage. At the isotherm, the growth velocities reach a stable maximum that in all experiments corresponds to the period of linear growth. The highest linear values are measured at the {101} interfaces, from 2.1 × 10−8 m/s at 19°C of undercooling to 4.8 × 10−7 m/s at 129°C of undercooling. Crystal growth is slower at other interfaces, in the ranges 1.9–7.6 × 10−8 m/s and 4.5 × 10−9 – 7.6 × 10−8 m/s for the {100} and {001} forms, respectively. Growth in the <010> dimension appears limited to less than 2.4 × 10−8 m/s at 129°C of undercooling. We constrain the uncertainty on these growth velocities, which includes the environmental conditions (± 8.6°C on the nominal undercooling) and the measurements of crystal lengths (underestimated by <16% at most fast interfaces). A systematic and comprehensive review of 19 pre-existing datasets indicates that our linear growth velocities are faster than most growth rates determined at comparable undercoolings. Growth rates determined as half crystal lengths divided by total time are intrinsically low estimates of the true maximum, linear growth velocities, because the total time includes periods of slower or non-growth, and measured crystal dimensions are subject to projection foreshortening or truncation. These errors can lead to values that are several times to several orders of magnitude lower than the true maximum growth rates. This study completes and refines previously published data on the crystallization kinetics of olivine, highlighting the sensitivity of growth rates to specific environmental conditions and measurement methods. We emphasize the importance of symmetrical growth and true maximum growth velocities for interpreting olivine growth histories.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1038/s41467-021-24275-6
